Hi all!
It seems the most common FAQ for MOS newbee/users is: "which graphic board work on Pegasos? Whic ones are well supported by MorphOS?" Moreover some people bought GFX that cant'properly be used on their Pegasos.
So, why don't we create a list of compatible/tested/working GFX boards so this problems can be avoided? I actually think this can be usefull for everyone.
I can start giveing my little help with the boards tested by me:

- Sapphire Radeon AGP 7000 -> Working
- Sapphire Radeon AGP 7500 -> Working
- ATI Radeon AGP 8500 -> Working (obviously NO-Overlay)
- PowerColor AGP Radeon 9000 -> Working
- Shappire Radeon PCI 7000 -> *NOT-Working* (totally not recognized by OF - black screen)
- Voodoo3 3000 AGP -> Working

Is it enought to start!?

I'll be more than happy to compile this list into something usable on MZ.

An actual Radeon branded Radeon7000 works fine.

Mabe it's a good idea to also add additional info,
like if Warp3D is supported etc.. ?

Bye,
Felix.

I have a similar Voodoo, and a Radeon.

My Radeon is a Radeon 8500LE with 128 Mb DDR. No overlay (neither in Linux nor in MorphOS), and no OpenGL/Warp3D support - yet, else it's perfectly working, fast, and gives a beautiful image.

Hoping for Radeon 3D support

Overlay suppport is coming to all supported Radeons soon.. (I hope 1.4.1, but at least 1.5) ... Also some of Radeon 9200:s are to be supported on 2D ..

About 3D? .. I have no clue how far they have reached atm..

-Sapphire Radeon 9100 128MB works fine

work with new driver that should be in new MOS:
-Gigabyte Radeon 9200SE
-Sapphire Radeon 9200SE 64MB & 128MB

hope this helps
Scott

As an experiment I tried a PCI SIS305 card. It doesn't work either.
I get the OF screen, then MorphOS boots but it stays on the OF
screen. Is there a PCI graphics card that does work? Or is there
something that I need to tell OF? I'm trying to get a PCI graphic card
working to see if that will help the Articia/AGP sound problem.

David

UPDATE: I think I bought a faulty card. Put it in my PC and the same
thing happens - I see the text when it first powers on - then just a
black screen. Rebooted and it was just a black screen. Turned the PC
off and back on and it showed the initial post stuff then black again.
Guess I'll return it. :)

Club3d Radeon9k here. Works too. I think ;)

Sapphire Radeon9k AGP 64MB - works ok.

|||

[ Edited by Velcro_SP on 2011/3/12 1:58 ]

The S305 PCI card that I bought turns out to be an S315 and doesn't
work at all.

I just received my Pegasos II, Ya! Are the Video cards for these Pegasos I compatable with PegII? Is there a link to a list of compatable; Video cards, RAM etc...?

Gigabyte 9200SE/128Mo works fine on my pegII with morphos 1.4.1 and 17" LCD :)

SiS 6326 PCI 4MB does not work properly with
Pegasos-II G4 and MOS1.4 installer. It does not
have enough memory for the default screen mode.
About three columns of pixels are shown and then
there are three blank columns and so on. Cursor
is garbled too. I guess it is possible to install
MOS anyway and then change the mode.

SiS 6326 AGP 8MB is ok.

I'm still waiting for my Radeon 9000 to arrive...

3dfx Voodoo 3 2000 PCI - works perfectly here.

Voodoo3500 AGP works without problems, but the TV driver isn't public yet... but it works well with Overlay, Warp3D, etc...

Virge PCI 4MB doesn't work...

Hi guys...

Slightly off topic:
I'm about to buy a PegII. (yeah!) BUT I am hesitating for the graphic card. My budget is tight for now, so it's between a Radeon7000, or a 3DFX Voodoo3 on eBay (I'd like the 3D to work asap, as MOS1.5 release date is still unannounced... )

I know that the 3DFX is obviously older but what is the big difference between the two apart from the 3D in MOS1.4? Which one would you go for? is 32MB enough for Morphos? Would you advise AGP or PCI?

Also, do you know if MOL & PegXmac work with Voodoo cards? Or it prefers a Radeon to be more "apple hardware friendly"?

Sorry for all these questions...
Thanks for helping!
Cheerio,
JBB

Voodoo 3 2000 16MB AGP - Warp3D
Radeon 9200 128MB AGP - No Warp3D :o(
Both works fine.

ATI Radeon 8500LE 128MB DDR (AGP) working WITH OVERLAY!

also the radeon 9100 works fine to me.
have an phillips 21"brilliance monitor and it rocks !!!!!

only nobody talk about the 9100 card with 128 DDR, is it well
supported or just a little.

the only thing that bothers me is that i can not run 1600 x 1200 with
at least 80Hz. You gonna be crayzi if you look at a big resolution
with only 60Hz :eek:


now i run a 24bit 1280x1024 @ 71.14 Hz

@ SSSMoves
> the only thing that bothers me is that i can not run 1600 x 1200 with at least 80Hz.

You have to create new modes with System Settings --> ModeEdit. You can easily obtain also 1600X1200@100Hz

Remember to edit your monitor prefs too



> nobody talk about the 9100 card with 128 ...

FYI: Radeon 9100=8500LE

There is a hardware compatibility list in the WIKI on pegasos.org.
You can find the graphics card section here: http://www.pegasos.org/index.php?pagename=Graphics&op=modload&name=phpWiki&file=index

ok here 's my addition : (even if everyone know what i'll write under)

Voodoo3 1000 AGP -> working
Voodoo 3 3000 PCI -> working
Voodoo3 3500 AGP -> working
Voodoo3 3500 TV AGP PAL -> working
voodoo4 4500 AGP -> working
voodooMAC 5500 PCI -> working
powercolor Radeon 7000 64MB DDR -> working


just my $0.02

Club3D Radeon9000 AGP 64MB

works perfectly.

hello guys,

PowerColor Radeon 9200SE/128 Mo works fine with my monitor Relisys 17" TE786 currently at 1024x768 @ 85 hz. little help about the bandwith, my manual says 135 Mhz but i saw, three or four years ago on www.teco.com, 175 Mhz. which is the good value ? what could be the results if i try 175 Mhz instead of 135 Mhz ?

Brumiga