USB 3.0 PCI Express on MorphOS
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    polluks
    Posts: 624 from 2007/10/23
    From: Gelsenkirchen,...
    Without any drivers?
    Pegasos II G4: MorphOS 3.9, Zalman M220W · iMac G5 12,1 17"
    Power Mac G3: OSX 10.3 · PowerBook 5,8: OSX 10.5, MorphOS 3.15
  • »04.05.21 - 17:59
    Profile
  • Jim
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Jim
    Posts: 4946 from 2009/1/28
    From: Delaware, USA
    Quote:

    Papiosaur wrote:
    Hi polluks,

    yes in USB 2.0 mode without drivers will be nice

    I don't think usb 3.0 will be supported one day on MorphOS, sometimes i dream :-)

    [EDIT] The PCI model support is NEC i think isn't it ?

    [ Edité par Papiosaur 04.05.2021 - 21:19 ]


    Why not just install a USB 2.0 card?
    "Never attribute to malice what can more readily explained by incompetence"
  • »04.05.21 - 21:13
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    sailor
    Posts: 175 from 2019/5/9
    From: Central Bohemi...
    The only advantage of this scenario what I see is
    PCIe card with usb 2.0 with MorphOS and usb 3.0 with linux. Usable with Powermac DC, X5000 and maybe X1000.
    But without MOS drivers for 3.0 it have very little value.
    AmigaOS: Pegasos II, Sam440ep-flex, Micro A1-C, AmigaOneX1000
    MorphOS: Pegasos II, Powerbook G4, iMac G5, Powermac G5 Quad
  • »05.05.21 - 07:32
    Profile
  • Jim
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Jim
    Posts: 4946 from 2009/1/28
    From: Delaware, USA
    Quote:

    Papiosaur wrote:
    Thanks for your returns ;-)

    I have a Quad and i don't think there is USB2.0 PCI-E card.
    Maybe PCI USB 2.0 card are compatible with PCI-E ports of the Quad ?

    [ Edité par Papiosaur 05.05.2021 - 08:46 ]


    I haven't found one with an NEC chip, just VIA based cards, but I haven't looked extensively yet.
    "Never attribute to malice what can more readily explained by incompetence"
  • »05.05.21 - 07:58
    Profile
  • Jim
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Jim
    Posts: 4946 from 2009/1/28
    From: Delaware, USA
    Quote:

    Jim wrote:

    I haven't found one with an NEC chip, just VIA based cards, but I haven't looked extensively yet.




    I looked further and found this SYBA card.

    https://www.sybausa.com/index.php?route=product/product&product_id=232
    "Never attribute to malice what can more readily explained by incompetence"
  • »05.05.21 - 11:33
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 11329 from 2003/5/22
    From: Germany
    > PCIe card with usb 2.0 with MorphOS […].
    > Usable with […] maybe X1000.

    You know something we don't? :-)
  • »05.05.21 - 12:56
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    sailor
    Posts: 175 from 2019/5/9
    From: Central Bohemi...
    it was only answer to theory mentioned in #3 - i.e. USB 3.0 card used with MorphOS like 2.0.
    I don't think such card exists.

    Now I am using in my X1000 PCIe 3.0 card, it works in linux like 3.0 and not works with MorphOS ( no surprise).
    AmigaOS: Pegasos II, Sam440ep-flex, Micro A1-C, AmigaOneX1000
    MorphOS: Pegasos II, Powerbook G4, iMac G5, Powermac G5 Quad
  • »05.05.21 - 13:04
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    sailor
    Posts: 175 from 2019/5/9
    From: Central Bohemi...
    Quote:

    Papiosaur wrote:
    I have a Quad and i don't think there is USB2.0 PCI-E card.
    Maybe PCI USB 2.0 card are compatible with PCI-E ports of the Quad ?


    You can use PCIe - PCI bridge + PCI NEC USB2.0 card.
    Or - maybe the simplest way is powered USB hub - Quad have working USB 2.0, but few ports.
    AmigaOS: Pegasos II, Sam440ep-flex, Micro A1-C, AmigaOneX1000
    MorphOS: Pegasos II, Powerbook G4, iMac G5, Powermac G5 Quad
  • »05.05.21 - 13:07
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 11329 from 2003/5/22
    From: Germany
    > I am using in my X1000 PCIe 3.0 card, it […]
    > not works with MorphOS ( no surprise).

    With "it" = X1000, or "it" = PCIe 3.0 card?
  • »05.05.21 - 13:26
    Profile