Hardware compatibility reports to the MorphOS Library
  • Caterpillar
    Caterpillar
    outrun1978
    Posts: 28 from 2018/7/8
    Hi JPV

    If you can add the following which i use and work with MorphOS 3.11

    Keyboard
    Ducky Zero Keyboard DK2108SZ

    Joypads
    8-bitdo SFC30 Pro Controller hid.class
    Speedlink Xeox Gamepad hid.class

    Printer
    Xerox 3225 Workcentre- Postscript
  • »15.08.18 - 16:20
    Profile
  • jPV
  • Paladin of the Pegasos
    Paladin of the Pegasos
    jPV
    Posts: 1692 from 2003/2/24
    From: po-RNO
    Added... does it look OK? I put those hid.classes in parenthesis... here's something to think about that what information is needed for game controllers. Does it matter for users which class is used, should lowlevel.library vs sensors.library be taken in count somehow?

    [ Edited by jPV 15.08.2018 - 19:49 ]
  • »15.08.18 - 16:39
    Profile Visit Website
  • Caterpillar
    Caterpillar
    outrun1978
    Posts: 28 from 2018/7/8
    Actually forgot to mention with the 8bitdo and Xeox gamepads that you need to use direct input and not X-input for these to work, the same as you would on AmigaOS 4. Both pads make use of lowlevel.library and sensors.library.

    Poseidon seems to identify this automatically as hid.class so am not really sure this should be an issue but is handy to know in case you need to manually attached it. I have found with my Xbox One Controller that it didn't recognise the Xbox360.class straight away and had to attach so i guess identifying the hid.class of a pad may help if Poseideon doesn't automatically pick this up. :-)
  • »15.08.18 - 17:48
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Cool_amigaN
    Posts: 586 from 2011/11/30
    Pls add:

    Mouse: Sharkoon Skiller SGM2 (No software needed for RGB and DPI settings, side buttons don't work ofc)
    Keyboard: Cool Master MS210/MK110 (No software needed for full RGB control and Fn multimedia keys work out of the box)
    Adapter: Retronic Design DB9-USB

    MorphOS test version 3.13
    Amiga gaming Tribute: Watch, rate, comment :)
  • »24.07.20 - 21:48
    Profile Visit Website
  • Butterfly
    Butterfly
    Posts: 63 from 2019/10/15
    Not sure if you added it, but the Steelseries Arctic 7 works like a charm.
  • »25.07.20 - 12:13
    Profile
  • Just looking around
    Puni
    Posts: 2 from 2020/7/21
    From: Norway
    Hi jPV,

    Mice:

    A-Eon Technology MX-1000-1 - Wired optical mouse - USB

    Keyboard:

    Microsoft Wired Keyboard 600 - Model X880609-600 - USB

    Both working great on a Mac Mini G4 with latest MorphOS. :)
    Member of Void - An Amiga demo group (website)
  • »25.07.20 - 16:07
    Profile Visit Website
  • Butterfly
    Butterfly
    Posts: 63 from 2019/10/15
    Quote:

    jPV wrote:
    Quote:

    MoerBoer wrote:
    Not sure if you added it, but the Steelseries Arctic 7 works like a charm.

    I saw you mentioning it on the other thread, but forgot. Thanks for reminding!

    BTW. have you tested the microphone on it too?


    I'll test tomorrow and update.
  • »25.07.20 - 17:20
    Profile
  • Butterfly
    Butterfly
    Posts: 63 from 2019/10/15
    Quote:

    jPV wrote:
    Quote:

    MoerBoer wrote:
    Not sure if you added it, but the Steelseries Arctic 7 works like a charm.

    I saw you mentioning it on the other thread, but forgot. Thanks for reminding!

    BTW. have you tested the microphone on it too?


    Unfortunately the mic on the Arctis 7 doesn't work.

    On the plus side, I tested an other usb / bluetooth headset I had.

    Turtle Beach Stealth 520 confirmed to be working with Audio out. Could also not record with the mic.
  • »26.07.20 - 06:30
    Profile
  • Butterfly
    Butterfly
    Posts: 63 from 2019/10/15
    BTW. when you pair the Apple Bluetooth Magic Keyboard ( version 1 ) inside Leopard and then reboot in MorphOS, it remembers it and keeps working :)

    Nevermind, I see it's already on the supported keyboards section.

    [ Edited by MoerBoer 26.07.2020 - 11:41 ]
  • »26.07.20 - 08:17
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    connor
    Posts: 540 from 2007/7/29
    Quote:

    Cool_amigaN wrote:
    Pls add:

    Mouse: Sharkoon Skiller SGM2 (No software needed for RGB and DPI settings, side buttons don't work ofc)


    I thought additional buttons do "always" work and you only have to configure them. Do they not show up in poseidon as extra buttons?
  • »27.07.20 - 16:21
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Cool_amigaN
    Posts: 586 from 2011/11/30
    Add another one:

    T.G.S. Joystick: 2 seperate buttons + autofire working properly (tested DB9 version with Retronic Design DB9-USB).

    Note: native USB test version will soon follow I hope.

    Minor correction:

    Keyboard: Cooler (not Cool) Master MS210/MK110.

    BTW I have strong feeling that Cooler Master CK552 with Gateron switches should also work as it's the same layout / on the fly rgb - fn keys with MS210/MK110.
    Amiga gaming Tribute: Watch, rate, comment :)
  • »27.07.20 - 19:31
    Profile Visit Website
  • Cocoon
    Cocoon
    Zetec-s
    Posts: 60 from 2008/7/10
    From: Cheshire, UK
    Hi jPV

    Please add the following;

    Mice:

    That do work:

    Microsoft Compact Optical Mouse 500 - Wired Mouse
    Logitech M330 Silent Wireless Mouse

    Don't work:

    Microsoft Wireless Mouse 4000
    Microsoft Wireless Mouse 900 (part of set with the below Keyboard)

    Keyboard

    That do work:

    Microsoft Wireless 900 Keyboard
    Xenta RK107 Keyboard

    Thanks
    Powerbook 1.67Ghz/1.5GB MorphOS 3.14 Registered
    MacMini 1.5Ghz/1GB MorphOS 3.14 Registered
    Efika 5200B 400Mhz/128MB MorphOS 2.3 Registered
  • »19.08.20 - 18:38
    Profile
  • ASiegel
    Posts: 1254 from 2003/2/15
    From: Central Europe
    @Zetec-s

    MorphOS 3.14 will include support for Microsoft Wireless Mouse 900.
  • »19.08.20 - 18:52
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Cool_amigaN
    Posts: 586 from 2011/11/30
    Quote:

    connor wrote:
    Quote:

    Cool_amigaN wrote:
    Pls add:

    Mouse: Sharkoon Skiller SGM2 (No software needed for RGB and DPI settings, side buttons don't work ofc)


    I thought additional buttons do "always" work and you only have to configure them. Do they not show up in poseidon as extra buttons?


    Hey sorry I missed your post.

    Yes, you are correct, on the hid.class 4.5 I saw mouse button 4 & 5 and they were operational when I enabled "track incoming events"!

    So, I added a new performed action and tested with a showconfig cli command (shell) which gets triggered by "down"... it works!

    Any idea how can I do close/new tab on OWB on them (is it arexx?)? If there would be anyother useful tips to use (second thought is up/back on ambient lister) let me know.

    Sounds like a perfect addition to the library imho :)
    Amiga gaming Tribute: Watch, rate, comment :)
  • »19.08.20 - 22:06
    Profile Visit Website
  • Cocoon
    Cocoon
    Zetec-s
    Posts: 60 from 2008/7/10
    From: Cheshire, UK
    Quote:

    ASiegel wrote:
    @Zetec-s

    MorphOS 3.14 will include support for Microsoft Wireless Mouse 900.


    Good to hear.

    I only bought the Logitech 330 as the Microsoft 900 I had lying around didn't work and all Logitech stuff seems to work with Morphos is general.

    If I could use the Microsoft mouse then that would free up a USB socket on my MacMini.
    Powerbook 1.67Ghz/1.5GB MorphOS 3.14 Registered
    MacMini 1.5Ghz/1GB MorphOS 3.14 Registered
    Efika 5200B 400Mhz/128MB MorphOS 2.3 Registered
  • »19.08.20 - 22:26
    Profile
  • Cocoon
    Cocoon
    Zetec-s
    Posts: 60 from 2008/7/10
    From: Cheshire, UK
    Quote:

    Zetec-s wrote:
    Quote:

    ASiegel wrote:
    @Zetec-s

    MorphOS 3.14 will include support for Microsoft Wireless Mouse 900.


    Good to hear.

    I only bought the Logitech 330 as the Microsoft 900 I had lying around didn't work and all Logitech stuff seems to work with Morphos is general.

    If I could use the Microsoft mouse then that would free up a USB socket on my MacMini.


    Really glad to say, that as promised, my Microsoft 900 mouse now works under 3.14, so on my MacMini I only need to use one USB port for the mouse and keyboard. Giving me another for anything else. Brilliant!!

    Thanks for sorting this. Only been using Morphos for a couple of months now but already the pace of development is really pleasing. Please keep up the hard work.
    Powerbook 1.67Ghz/1.5GB MorphOS 3.14 Registered
    MacMini 1.5Ghz/1GB MorphOS 3.14 Registered
    Efika 5200B 400Mhz/128MB MorphOS 2.3 Registered
  • »06.10.20 - 10:16
    Profile