Forum Index
 » 
User Forums
 » 
Off-Topic
cruxppc.org is down
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    polluks
    Posts: 779 from 2007/10/23
    From: Gelsenkirchen,...
    Hi!
    Anybody knows a mirror for the ISO?

    TIA
    Stefan
    Pegasos II G4: MorphOS 3.9, Zalman M220W · iMac G5 12,1 17", MorphOS 3.18
    Power Mac G3: OSX 10.3 · PowerBook 5,8: OSX 10.5, MorphOS 3.18
  • »22.12.11 - 20:16
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    defender
    Posts: 247 from 2011/4/24
    I have found one :
    http://gopherproxy.meulie.net/mirror.lug.udel.edu/1/crux-ppc/2.7

    But I don't know how fast/slow it is.

    greets
    defender
    PowerMac 3.6 - Radeon 9000_64Mb - 1,5Gb Ram - SB Live - MorphOS 3.9
    CD32 TF330 SILP Wifi- PowerBook 1,67GHz 1GB/100GB - MorphOS 3 reg. 1455 IMac Isight
  • »22.12.11 - 20:26
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    CountRaven
    Posts: 566 from 2007/12/11
    From: Greece
    http://download.polytechnic.edu.na/pub3/CRUXPPC/2.5/
  • »22.12.11 - 20:30
    Profile Visit Website
  • Just looking around
    ppc_addon
    Posts: 10 from 2009/5/9
    From: Roma Caput Mundi
    i just wrote a post adhoc:
    http://linuxpowerpc.blogspot.com/2011/12/crux-ppc-mirrors-to-download-install.html
    __= My Blog: http://linuxpowerpc.blogspot.com =__
  • »24.12.11 - 11:34
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    CountRaven
    Posts: 566 from 2007/12/11
    From: Greece
    It will be a good idea to have an ISO including a bootable kernel and a simple installer. There is a LOT of work need to be done in command line mode to get CruxPPC installed -cheCk the README-

    Someone must still have on of those Linux CDs for Peg1 stored somewhere.

    http://www.osnews.com/story/3589/Pegasos_An_Interesting_Sexy_New_Platform/page2/

    hmmm another option could be PegXlin... does anyone still have it?

    In that article I can read references for Debian or YDL...


    [ Edited by CountRaven 25.12.2011 - 05:53 ]
  • »25.12.11 - 06:10
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    polluks
    Posts: 779 from 2007/10/23
    From: Gelsenkirchen,...
    Thank you guys!
    http://download.polytechnic.edu.na/pub3/CRUXPPC/latest/ is fine.
    I hope cruxppc.org will go online again.

    Merry Christmas!
    Pegasos II G4: MorphOS 3.9, Zalman M220W · iMac G5 12,1 17", MorphOS 3.18
    Power Mac G3: OSX 10.3 · PowerBook 5,8: OSX 10.5, MorphOS 3.18
  • »26.12.11 - 12:58
    Profile
  • Just looking around
    ppc_addon
    Posts: 10 from 2009/5/9
    From: Roma Caput Mundi
    @polluks

    as i remember you need to rebuild opt/libdrm with a patch to have DRI enabled on peg2:

    Code:

    nel@pmac:~$ cat /usr/ports/ppc/opt/libdrm/Pkgfile 
    # Description: Userspace interface to kernel DRM services
    # URL: http://dri.freedesktop.org/
    # Maintainer: acrux, acrux at linuxmail dot org
    # Depends on: libpthread-stubs
    # PPC!=:

    name=libdrm
    version=2.4.29
    release=1
    source=(http://dri.freedesktop.org/$name/$name-$version.tar.bz2 
    	pci0001.patch)

    build() {
        cd $name-$version
    	# if your videocard is on PCI:0001 bus (e.g. on Pegasos2)
    #	patch -p0 -i $SRC/pci0001.patch

    	./configure --prefix=/usr --with-gnu-ld 
    	--disable-intel --enable-udev 
    	--enable-nouveau-experimental-api

        make
        make DESTDIR=$PKG install
    }
    __= My Blog: http://linuxpowerpc.blogspot.com =__
  • »27.12.11 - 18:54
    Profile Visit Website
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12074 from 2003/5/22
    From: Germany
    Site has been down for half a decade, but there's a new port of Crux for PPC32:

    "CRUX-PPC goal is to supports 32bit PowerPC G3 and G4. It does not support 64bit PowerPC (G5) at this time. There are still a fair number of Linux distributions supporting G5 machines but distros supporting 32bit PowerPC are getting scarce. Hence, for now at least, CRUX-PPC efforts are focused on the 32bit PowerPC machines.
    This project is not a continuation of the (now defunct) CRUX-PPC project which existed previously (until 2012 or so). This project is a new port of CRUX-3.5 to the PowerPC. Although similarities exist and pieces from the previous CRUX-PPC may be reused in this project, this is a fresh port of CRUX to the PowerPC and backwards compatibility with the previous CRUX PPC is not a goal of this project.    "
    https://github.com/cruxppc/cruxppc-ng-3.5

    Releases: https://github.com/cruxppc/cruxppc-ng-3.5/releases
  • »14.02.20 - 00:19
    Profile