I just bought an iSight G5.
iGame is installed and i transfered some games to it that are whdload ready
set the repo and scanned
but cannot double click and launch a game from the list
i checked dependencies and decided that uae4all and powersdl should be installed
still games do not launch
what other dependencies are there?
maybe it needs euae or another copy of uae

thanks

Hi bash64,

at start iGame is a soft for AmigaClassic with Worbench, ROMs, etc...

On MorphOS, you will need an emulator like E-UAE, i think you need to install WHDLOpener, it will install E-UAE, your Workbench disk (ADF) your and Amiga 1200 and/or Amiga 500 ROM (not included)

https://www.morphos-storage.net/?id=1531930

After that, should work i think.

Quote:

One option is to install e-uae, prepare a wb 3.1 hdf (if you have it ready on PC, you can just copy it on MorphOS), install UAELoad (<- and follow it's instructions on what to edit on the conf files if needed). Then launch iGame and by double clicking any slave, you will be able to play the games of your choice.

Another options is WHDLoadOpener by Korni, for which you can read more here.

And if you are up for total bast from the past, be sure to check our SWOS Total Pack.

it has been very difficult for me to lauch the game
i think obligement can help

there 2 whldload (opener)
68k
morphos
only 68 k version i manage to work on my imac g5 for moment (i not change for moment)
on prefs
env/archive
uaeload.cfg to copy
and edit like:
uaeexe = DH1:E-UAE_0.8.29-WIP4/e-uae
uaecfg = DH1:E-UAE_0.8.29-WIP4/Conf/UAELoad.conf
uaescr = UAE
uaepri = 1
timeout = 100

the conf uae:( not necessary 68060 for cpu)
filesystem=rw,System:dh1:E-UAE_0.8.29-WIP4/Harddisks/system3.1
filesystem=rw,Jeux:emulation:E-UAE_0.8.29-WIP4/HardDisks/Games

kickstart_rom_file=DH1:E-UAE_0.8.29-WIP4/Roms/kick31.rom
;enable_jit=yes
;cachesize=32768
;cpu_compatible=false
;cpu_cycle_exact=yes
;blitter_cycle_exact=yes
;comp_optimize=no
;comp_constjump=yes
;comp_trustbyte=indirect
;comp_trustword=indirect
;comp_trustlong=indirect

immediate_blits=no
cpu_type=68060

;gfx_width=640
;gfx_height=480
;gfx_linemode=none
;gfx_center_horizontal=smart
;gfx_center_vertical=smart
gfx_fullscreen_amiga=yes
;gfx_fullscreen_picasso=yes

z3mem_size=8
chipmem_size=4
fastmem_size=100

sound_bits=16
sound_channels=stereo
sound_frequency=22500

chipset=aga
show_leds=false
kbd_lang=fr

scsi=false
scsi_device=ATAPI

bsdsocket_emu=false

# joy<n> where n is lowlevel unit in amigaos target.
# In SDL target it's be the enumeration order.
joyport0=mouse
joyport1=joy1

# overlay display
amiga.use_overlay=yes

# screen type (public, custom or ask)
amiga.screen_type=public

certainly os3.2 works and the roms are included i think (to buy)

thanks for the config example

i remember this worked on my powerbook g4 much easier
i think
i may be confusing that with my amikit project and the rpi project which made it all worlds easier

there are 2 version of igame (i forget)
68k
Morphos

Both work. I use 68k but it doesn't really matter.

ok, so i am going to setup euae manually with a kick rom
do i need whdload seperately, i thought igames had that built in?
thanks

If you go the uaeload route then you must setup a 3.1 wb hdf with uae_rcli and latest whdload installed on it. IGame just calls the slave, it doesn't have whdload in it. Prefer 3.1 instead of 3.2 because the latter boots slower. Do not install anything else on 3.1, leave it as stock as possible. Do not install latest whdload on Morphos (at sys/c), use the version provided by uaeload, otherwise you will get crashes.