Hello all,
Can anyone direct me to the latest version of Hatari (Atari ST and Falcon emulator) for Morphos? I've found a 2007 release of v0.95 on Aminet, but nothing newer. Is this the latest version available for Morphos, or is a later version available somewhere?

Hello transmorpher,

i think there is no newest version than 0.95.

Maybe somebody can port AROS version (1.5.0) to MorphOS.

@transmorpher

have you tried the OS4 version of hatari, which is currently at v1.6.2, with os4emu? the download is at http://hirudov.com/amiga/Hatari.php if you want to try it. i haven't yet.

-- eliyahu

I gave the OS4 version a try yesterday and received an error message

I can't find a list of OS4Emu error codes, though a forum post suggests that the error codes are essentially the same as AmigaDOS. Unfortunately, this error maps to the following:

Code: 235
Description: Bad loadfile hunk
Solution: Program damaged, re-download

The OS4Emu documentation doesn't refer to additional parameters that can be tweaked. I re-downloaded it and tried to run it a few times to see if the error was caused by a broken archive. I also downloaded an earlier version of the OS4 release, which also didn't work.

If anyone has other ideas for trialling the OS4 version, I'm happy to test them out and report back to the thread.

I guess it fails because it most likely is using dynamic linking not supported in os4emu. It will be easier create new port from Hatari.

I know that it is not good for someone to ask for a port of a program because if it has not been done, it is because it has a lot of work. But I would really like to know if someone can look over the HATARI 2.0 to create a MorphOS version.

Thank you very much.

Im sure a good coder can do it in a few days. I half did it but is buggy as hell cos there are a lot of things I dont understand.
Perhaps beworld can give it a try ;)

yes i will try .... maybe it's simple lol

in /includes/m68000.h

i have an error when i compile it:

32:3 error: expected identifier before ( token
REG_D0, /* D0.. */

/* 68000 Register defines */
enum {
REG_D0, /* D0.. */
REG_D1,
REG_D2,
REG_D3,
REG_D4,
REG_D5,
REG_D6,
REG_D7, /* ..D7 */
REG_A0, /* A0.. */
REG_A1,
REG_A2,
REG_A3,
REG_A4,
REG_A5,
REG_A6,
REG_A7, /* ..A7 (also SP) */
};


i try with AROS SOURCE 1.4.0 : http://aminet.net/search?query=hatari

[ Edité par beworld 24.01.2018 - 18:40 ]

I have to look for how I solved that error this night.

I cant look to my sources right now but I'll say that I used -D_no_ppcinline flag to solve that. I'll try to recover the makefile later.

ok i will try with this.

I try to compile with version 1.4.0 and next with 2.0.0.

thanks

another question how to compile that :

i have an error : expected specifier-qualifier-list before '(' token

#define SHORT(x) ((INT16)(x))
X

#define LONG(x) ((INT32)(x))


Thanks.... i search but dont find grrrrr

Mmm... In which file gives error? Perhaps Int32 is not defined.

Quote:

And how the progress of work on the port Hatari?

i try i try...

I can launch it.....
Grab.png

I can configure it

Grab2.png

but crashingggggggggggggggg with a lort of Unknown BIOS or Bus Error....

OHhhhhhhhhhhhh
i believe it's worrrrrrrrking lol
i try to configure with tutorial on web and with good TOS and goo configuration.. it's working lol


First version Available : http://www.morphos-storage.net/?page=Emulation&file=Hatari_2.0.0.lha

[ Edité par beworld 31.01.2018 - 20:05 ]

Never bothered to check the ST/Falcon systems before. Does the emulator take similar approach with uae and the hard files to run the OS? Anyone has something to share for a quick configuration?

I test with this link : http://ae.dhs.nu/hatarisetup/
And io odwnload some game .stx to test it.

I compile version 2.1.0.... available on storage

But use at your risk

Thanks beworld. Will try tomorrow!

Does anyone still have the 2.1.0 archive ?

I cannot seem to get the newer 2.2.1 version to work.
It looks like Hatari expects pathnames to drive letters and even changing them manually
in the hatari.cfg file , it will not accept Work: or PROGDIR:
so I can't get it to find any MSA/ST or HDA file or mount a directory as a GEMDOS drive.

Booting the emulator with the suppplied EMUTOS works, no issue there.

New version is available: https://hatari.tuxfamily.org/news.html

I will try to update it and check your problem.. just need to have ST file ROMS etc...

PS: Version 2.5.0 build... but not working Ahhhhhhhhh.... need more test

[ Edité par beworld 28.04.2024 - 13:10 ]

Thank you , you can find the TOS ROMS here

https://avtandil.narod.ru/tose.html

Beworld, you are going to have to clone yourself to have time for family, work, and ports.

yeah... You are certainly right...