> I assume they are, because it reads at http://www.morphos-team.net/hardware
>
> Apple PowerBook G4**
> * * - Only models with a Radeon graphics chip are supported.

This same note was already there before any Titanium model was supported:

http://web.archive.org/web/20131120051024/http://morphos-team.net/hardware

If the statement was misleading back then, I don't see how you can assume that it ensures support for all Titanium models with Radeon now.

> unless someone has any better info, I'm leaning to believe
> that they are supported.

That thread may be read as 3,5 being the only Titanium supported. It's ambiguous, admittedly. I also remember a discussion about this on the MorphOS mailing list to the effect that pre-3,5 PowerBooks are not supported. Let's hope the MorphOS team will clarify.

> I assume they are, [...] so, unless someone has any better info,
> I'm leaning to believe that they are supported.

I can see that you removed the PowerBook3,3 and PowerBook3,4 from the list of supported models 5 days ago. How come?

http://library.morph.zone/index.php?title=Supported_Computers&diff=1895&oldid=1888

Talked with Frank on IRC little. They didn't have 3,3 or 3,4 to test, so only 3,5 is supported now, and homepage information is a bit inaccurate in that regard.

Quote:

What does that mean?

That they still haven't tested it and are unsure about how it would work, and will change their "official stance" because of this until they actually test it?

Or that they have tested it now and found out that it doesn't work?

Great article BTW!

> That they still haven't tested it and are unsure about how it would work, and
> will change their "official stance" because of this until they actually test it?

It's less about "official stance" than about actually whitelisting the hardware in MorphOS.

Quote:

True. And "whitelisting" was actually what I meant with "official stance".

Quote:

This is how I understood it. In any case they aren't whitelisted now.

[ Edited by jPV 13.02.2015 - 08:11 ]

I've been updating Shell Commands section and adding descriptions for commands. I mainly used descriptions from the Help program with the permission from its author, but those are from 1.x times. Any help with new commads would be appreciated :)

Quote:

Thanks!

If I counted correctly, it seems like the Amiga One 500 (based on the Sam460ex/cr mainboard) became the 82:nd(!!!) system supported by MorphOS?

Or perhaps rather 82 and 83, since they are IMHO really two systems (slightly different specced motherboards, and also some different peripheral components in the system) even though they share the same name:

Specs: Amiga One 500 (Old/Sam460ex)
Specs: Amiga One 500 (New/Sam460cr)



These system(s) should go in the list of Supported Computers I think!

Also the "MorphOS will currently use a maximum of 1GB of memory on these G5 machines, even if more is installed in the machine" in the G5 part needs to be changed now.

Or even better - deleted, and replaced with some general information at the top of the page about MorphOS memory restraints, which apply to all supported machines.

Done!

> Done!

https://acube-systemsbiz.serversicuro.it/shop/en/14-case-systems would be a better link for the Sam460cr-based AmigaOne 500 as there are as much as three different systems currently offered, not just one.

Fixed!

Quote:
Thanks for the list!

Erhm.. added a tutorial how to pimp your MorphOS into OS4 ;) Just in case if Sam owners would complain it looks too different :P Quick hackup without any proofreading or such:
http://library.morph.zone/How_to_Make_MorphOS_Look_Like_OS4

Few months ago I started to make a tutorial how to use several USB joysticks on MorphOS... but then I thought the article could be expanded to be generally about game controller support in MorphOS.... and then it was left unfinished :)

Anyway, I just added few things and made it public after all. If anyone has suggestions what it should contain, please tell. Or at least if you have tested any game controllers if they work or won't, I'll be happy to list them.

You'll find the article here: http://library.morph.zone/How_to_Use_Game_Controllers

Great. Thanks :)

Great work!

Good article about Game controllers.
I have tried a XBOX360 joypad with the MS usb cable and i can't use it. Trident shows a "?Running" state.
Don't know is I need a Pc USB adapter or what.
Will try a PS4 one meanwhile.

Quote:
Hi Mate, on a previous thread it was said the
only supported version was the one with usb wireless
adapter for PC.

Regards !

Thanks friend. I'm using a ps4 one while I get a pc adapter.

[ Editado por tolkien 25.10.2015 - 13:10 ]

Quite much added to the MorphOS Library since the last update!

Boot_wb started new sections listing applications, tools, and utilities included with MorphOS. I added screenshots and more descriptions on them, and also created new pages to list bundled screenbar modules, games, and blankers. They all have brief descriptions of programs, but adding usage descriptions will require some work still. Better than nothing already anyway.

Applications included with MorphOS
Tools included with MorphOS
Utilities included with MorphOS
Screenbar modules included with MorphOS
Games included with MorphOS
Blankers included with MorphOS

Then quickly moved this from forum messages to the library:
Preparing an Amiga Hard Drive

Put at least something to the last missing shell commands too:
Shell Commands

And finally, I wrote a big tutorial for new users:
Getting Started - A Beginner's Guide to MorphOS

Great stuff! Thanks.

Thanks! Especially for the beginners guide, as I am still a noob with MorphOS.