That is all.

For the time being...!

Dancing fricken banana!!!

Man, I never did rebuilt that LCS on the 2x2.7 G5! Looks like I have to fast track getting the O rings! Will install to the MDD tonight!

Congrats to the whole team! Well done...

Awsome

Something isnt working right... I go to boot off the CD on my MDD Mac G4, and after you click ok on the choose language and keyboard screen, complains and says the boot.img is too old.

That's because it's booted off the hard drive version.

I've burnt 2 CDRW on Macmini and Powerbook using OSX, neither are seen from the the choose boot screen, ie holding the alt key down, pressing C dosn't work either, browsing the CD looks fine, did someone forget to 'Bless' the boot image or something?

:) Whats the bless command again? :P

One short word for it: Wow!

This is a substantial leap forward for MorphOS in many areas! Looking forward to try it out!

Reworked Netstack, r300 3D, Wireless networking, ALL G4 iBooks, ALL Radeon-equipped aluminium Powerbooks, ambient light sensors, new included applications, new screenbar modules, G5 support, etc...

Big update!

I'm guessing from the 'targetted models' of the G5 support section that other models 'may just work'. Is it locked down to a range of system IDs/model numbers?

Downloading now to update various machines. Thankyou and congratulations to everyone involved for pulling it all together.

I got it to install...


If you have the current 3.1 installed, you just have to replace the boot.img on your boot patition frrom the /mac_ppc32/boot.img file. Course this is if you are using G4.

Tried that, goes to the Open Firmware screen, does it need to 'blessed' or something?





Edited to add, got it working on my Mac mini had to copy all the files from that folder

[ Edited by stephen_robinson On 2013/5/27 23:36 ]

Enormous, thanks a lot the MorphOS Team !!!

Thanks MorphOS team for this new version of this great Amiga OS.

Rock it!

That's a massive update as it seems from the release notes. Downloading it now. Night will be short of sleep probably.

Nice surprise. I looked but didn't see anything about powerbooks (or ibooks) putting out higher resolution external displays. Has anyone tested this yet?

My Powerbook doesn't boot on the CD
My G5 doesn't boot to
Tryed alt key to get booting devices and tryed pressing C key after powerUP.

I never had problems booting on MorphOS 3.1 CD on my Powerbook but MorphOS 3.2 doesn't work for me

We've identified the issue that makes the ISO unbootable, and are now trying to identify the root cause for the problem.

Apologies for the trouble this has caused. We're looking to fix the issue as soon as possible.

Thanks for the update, look forward to trying this on G5 power mac

We're making progress and if all goes well will have a fixed ISO momentarily.

Some notes about the issue:

- The problem appears to be in genisoimage, the application used to master the MorphOS ISO image. Sometimes it creates a HFS hybrid ISO image with corrupt HFS filesystem. The exact circumstances that trigger the corruption remain unknown at the moment, but we're able to work around the issue for now.

- The corrupt HFS effectively makes the OF unable to read the boot.img from the CD when 'c' key is pressed (this is due to the OF boot script appearing empty). Instead the boot.img is read from the HDD (presumably this happened for the testers and thus the issue went unnoticed). For anyone attempting to upgrade from 3.1 to 3.2 and getting a "your boot.img is too old" requester ran into this problem.

- An attempt to boot the boot.img manually from OF leads to a crash since the boot.img stored on the corrupt HFS is incomplete.

- Copying the boot.img from the ISO part of the hybrid CD to HDD and booting the system from this boot.img effectively works around the issue. In this case the corrupt HFS is effectively bypassed. (Such manual update procedure is used by some testers and also made it harder to notice the issue).

[ Edited by Piru On 2013/5/28 2:15 ]

New ISOs are now online. This new image should resolve the issue of not being able to boot the ISO properly.

If you however managed to install the earlier ISO (via copying the boot.img manually for instance) there is no need to install or upgrade again.

Apologies again for the inconvenience caused.

Quote:

@Piru - That was really fast response! Many thanks for solving the issue so quickly. Will be downloading it tomorrow!

is the airport on macmini supported now?

I've always said MorphOS has the best dev team bar none.

Will it work on iMac G5, even partially?

Killer update. Awesome!

Thank you MOSTeam!

Finally!!
Thanks.

Quote:

No.

Quote:

Nope.

Quote:

Thanks for the suggestion, it works, and now I have MOS 3.2 in my MacMini.

Quote:

Yes, this manual system of installation makes possible the true installation in the Mac Minis

Unfortunately Ambient panels have a lot of problems. Saving subpanels doesn't work. If panel has enabled autozipping, subpanel can't be hided after zipping main panel. If I enable autozipping, after boot of MorphOS, I can't open panel. I am able to open panel only when I drag the panel. Deleting panel with subpanel is ended with crash. I would like to at least autozipping which works like in MorphOS 3.1...

Update from 3.1 -> Ambient issues: buttons in wb (browser mode) windows do not work (except My Morphos), programs can not be started from panels, sound volume is alays set to maximum at statup ....

Installed first time on my iBook.

Unfortunately the danged thing now won't reboot. =(

-EDIT-

Finally got it going again - think the machine's ready to chuck it.

[ Edited by Robert On 2013/5/28 21:42 ]

test

How long should this install take?

It's at 1195 files/42501kb copied at the moment on my update install (Mac Mini G4) but now I've got the Unregistered requester pop up so it's crawled to a snail's pace!

Guess this one is an overnight jobbie then? 3.0/1 updated in around 5 mins for me.

Astonishing!
Time goes by and things become. This butterfly keep on flying up..
Let us follow you more and more and let me thank you once more for this become again.
Great work!!

Quote:

Did you install on top of an installed ultimate pack by chance?

Quote:

Took a few minutes only, even on Efika it was only about 15 minutes or so (haven't stopwatched it).

If 30 min problem still stays, copy the appropiate boot.img to your hfs boot partition, boot normally off your hd (i.e.3.2 boot.img, but 3.1 installation, advantage: you're in registered environment and don't run in the timeout trap), then mount the iso and start the iWizzard from the mounted iso. Worked well for me that way on all my three updated machines.

Quote:

It helped A LOT to add buffers to cd0: by 400

Quote:

Odd how it took so long for me then, sadly it also corrupted my DH1 partition and I've had to reformat it and start-over, but it's been around 40 mins now as well and it's slowly installing files.

Quote:

Open Prefs/SFS and have a look at the Cache settings, after a reformat they are set to default values, which are not the best.

Great, MorphOs on G5!
Many thanks to the developer team.

Missing Rave3d.library on PowerBook Radeon 9700, and PowerMac G5 Radeon 9600 Pro
Is this a bug?
This means no more Warp3D compatibility, so bye bye Amiga Warp3D stuff like demos, games like Heretic II, Shogo, WipeOut 2097

I'm praying for a bug and not a choice bypassing Warp3D Compatibility.

other issue:

On PowerBook 1,67Ghz, Trackpad doesn't work for
Retur to Castel of wolfenstein

It seems that this release has more than just one issue.. And surely it has not come out in short time!

Quote:

Bugreport or it didn't happen. ;)


- CISC

I already reported and explained the problem here on the forum, like other users did.
If with "Bugreport" you mean that I must rewrite it in the right place like the morphos mailing list, than I'll do it as soon as I have some spare time to resuscitate Yam.

[ Edited by Miky060 On 2013/5/30 19:06 ]

Ambient menus -> About MorphOS... -> Support -> Report a bug

So my suspects were right: the problem is that I wrote what is the issue here and technically it is not correct..

MorphOS 3.2 is running on my MINI ,,make only update directly from ISO (first time make update from CD but some libs cant open) and is working fine.Thanx to MOS team for update!

So, is safe now to use the iso?. Im planning to upgrade from a previous 3.x installation.

i have a very rare problem, my keyfile is not working with 3.2 mos, i replaced the hdd with more capacity, i copy the morphos.key to a pendrive, i installed mos 3.2 in the new harddisk, copy morphos.key from pendrive to sys:devs and says is unregistered!

Quote:





-Furvert

Quote:

Update: The issue I had with missing panels has been solved. My thanks go to all those involved.

- Furvert