Efika casing?
  • Order of the Butterfly
    Order of the Butterfly
    MorphDelf
    Posts: 273 from 2004/2/20
    From: Oslo, Norway
    I just wonder if Genesi will start to sell their casing standalone? Also.. bbrv..? Have you contacted the Minimig casing maker? Maybe he would make a great casing for Efika?
  • »22.07.08 - 02:19
    Profile Visit Website
  • rob
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    rob
    Posts: 128 from 2008/7/22
    Loriano has already mentioned making a case for the Efika but he needs to get the 50 orders for his Minimig case before doing any follow ups.
  • »22.07.08 - 05:14
    Profile
  • Caterpillar
    Caterpillar
    stony
    Posts: 32 from 2004/4/18
    From: Poland
    Make it yourself :)
    http://efika.internetdsl.pl
  • »22.07.08 - 07:52
    Profile Visit Website
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    Drako^lM
    Posts: 132 from 2005/8/10
    From: Poland , Chelm
    Nice work :)
    Hardware :
    Power Mac G5 2.3 Ghz & MorphOS 3.x & OSX 10.5
    Mini G4 1.5 Ghz & MorphOS 3.x
    BlaBla Team Member -> http://blabla.ppa.pl
    AmiParty Team Member - http://www.chal.pl/
  • »22.07.08 - 08:01
    Profile Visit Website
  • Caterpillar
    Caterpillar
    stony
    Posts: 32 from 2004/4/18
    From: Poland
    Thanks Xenocide!




    --
    Niezle mnie punktujesz Jerzy.
  • »22.07.08 - 08:21
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    Tcheko
    Posts: 436 from 2003/2/25
    From: France
    Have a look at : EfikaZ
    Quelque soit le chemin que tu prendras dans la vie, sache que tu auras des ampoules aux pieds.
    -------
    I need to practice my Kung Fu.
  • »22.07.08 - 10:02
    Profile Visit Website
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    Nitro
    Posts: 106 from 2003/8/24
    From: Albuquerque, NM
    I'd be happy if someone sold back plates that would fit on any ITX or ATX case. I used a Morex 3688 mini ITX case and it fits ok with a little modding, but I stilll need to make a back plate.
  • »22.07.08 - 20:26
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    Tcheko
    Posts: 436 from 2003/2/25
    From: France
    Quote:

    I'd be happy if someone sold back plates that would fit on any ITX or ATX case. I used a Morex 3688 mini ITX case and it fits ok with a little modding, but I stilll need to make a back plate.


    I can do that if you wish. I have a backplate design already done. I just miss ITX or ATX case. It would be usefull to have a, adaptator board as well for screwing the board to the case.

    I will investigate.

    Czk.
    Quelque soit le chemin que tu prendras dans la vie, sache que tu auras des ampoules aux pieds.
    -------
    I need to practice my Kung Fu.
  • »22.07.08 - 20:52
    Profile Visit Website
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    Nitro
    Posts: 106 from 2003/8/24
    From: Albuquerque, NM
    @ Tcheko
    Ok, sounds good. I'll P.M. my e-mail address for the order details.
  • »22.07.08 - 21:06
    Profile
  • Caterpillar
    Caterpillar
    tonho
    Posts: 25 from 2004/2/1
    http://flickr.com/photos/27640604@N06/
  • »23.07.08 - 21:58
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    ausPPC
    Posts: 543 from 2007/8/6
    From: Pending...
    Hi Tonho. Did you take those pictures? I can see what's going on in the first one but can you take me through the 2nd and 3rd pictures? All the same, it's great to see the DIY spirit is still alive!
    PPC assembly ain't so bad... ;)
  • »23.07.08 - 23:54
    Profile Visit Website
  • Just looking around
    Posts: 3 from 2005/10/3
    How about a selfmade laptop-case?
    Take a look at http://www.amile.de/amigaclubhamburg/c/club/efika/Nutzung/000001.jpg

    Here is the complete Story
    http://www.amigaclubhamburg.de/c/club/efika

    Sorry, only german.
  • »24.07.08 - 19:02
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    ausPPC
    Posts: 543 from 2007/8/6
    From: Pending...
    Wow - I know you can quickly get into trouble by modifying a motherboard but...

    1. Put a 90 degree "bend" in the ATX connector.
    2. Same but in the opposite direction for the PCI connector (+ an alternate PCI to AGP).
    3. Maybe even remove or redistribute the USB/Ethernet tower.

    ... and that laptop would only need to be half as thick. Still, well done for making a MorphOS laptop!
    PPC assembly ain't so bad... ;)
  • »25.07.08 - 23:58
    Profile Visit Website