MorphZone

Recent Video Drivers and PCIe cards on PowerMac 11,2.

ernsteiswuerfel

# 10

Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

HIS HD 5550 Silence, 1024 MiB, P/N: H557HO1G, VGA/HDMI/DVI-I, Generation: Evergreen
Does not work on MorphOS 3.18 (screen stays blank).

Code:

 # lspci -vv -s 0001:06:00.0
0001:06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570] (prog-if 00 [VGA controller])
	Subsystem: Hightech Information System Ltd. Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570]
	Device tree node: /sys/firmware/devicetree/base/ht@0,f2000000/pci@3/pci1787,2009@0
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 65
	Region 0: Memory at 90000000 (64-bit, prefetchable) [disabled] [size=256M]
	Region 2: Memory at 80140000 (64-bit, non-prefetchable) [disabled] [size=128K]
	Region 4: I/O ports at <ignored> [disabled] [size=256]
	Expansion ROM at 80120000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8 (downgraded)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel modules: radeon

Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]

»10.09.23 - 15:24

ernsteiswuerfel

# 11

Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

Sapphire HD 4550 HyperMemory, 512 MiB, SKU: 11141-06, VGA/HDMI/DVI-I, Generation: R700
Works on MorphOS 3.18!

Code:

 # lspci -vv -s 0001:06:00.0
0001:06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4350/4550] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited / Sapphire Technology RV710 [Radeon HD 4350/4550]
	Device tree node: /sys/firmware/devicetree/base/ht@0,f2000000/pci@3/pci174b,e106@0
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 65
	Region 0: Memory at 90000000 (64-bit, prefetchable) [disabled] [size=256M]
	Region 2: Memory at 80110000 (64-bit, non-prefetchable) [disabled] [size=64K]
	Region 4: I/O ports at <ignored> [disabled] [size=256]
	Expansion ROM at 80120000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8 (downgraded)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel modules: radeon

Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]

»10.09.23 - 15:25

man

# 12
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

HIS HD 5550 Silence, 1024 MiB, P/N: H557HO1G, VGA/HDMI/DVI-I, Generation: Evergreen
Does not work on MorphOS 3.18 (screen stays blank).

i think up to 512 mib not work perhaps
»10.09.23 - 19:35

man

# 13
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

HIS HD 5550 Silence, 1024 MiB, P/N: H557HO1G, VGA/HDMI/DVI-I, Generation: Evergreen
Does not work on MorphOS 3.18 (screen stays blank).

i think up to 512 mib not work perhaps
»10.09.23 - 19:37

man

# 14
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

x1950 512 mib not work only 256 miB
»10.09.23 - 19:44

ernsteiswuerfel

# 15
Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

Quote:

man schrieb:
I think up to 512 mib not work perhaps

My HD4550 got 512 M1B and it works.

But maybe you got a point here! The other cards I tried all were 1024 MiB and they did not work. Probably a hint.
Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]
»16.09.23 - 16:02

ernsteiswuerfel

# 16

Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

HIS 6570 Silence, 1024 MiB, P/N: H657HO1G, VGA/HDMI/DVI-I, Generation: Northern Islands
Does not work on MorphOS 3.18 (screen stays blank).

Code:

 # lspci -vv -s 0001:06:00.0
0001:06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570/8550 / R5 230] (prog-if 00 [VGA controller])
	Subsystem: Hightech Information System Ltd. Turks PRO [Radeon HD 6570/7570/8550 / R5 230]
	Device tree node: /sys/firmware/devicetree/base/ht@0,f2000000/pci@3/pci1787,2012@0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 65
	Region 0: Memory at 90000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at 80140000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at 0000 [size=256]
	Expansion ROM at 80120000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8 (downgraded)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: radeon
	Kernel modules: radeon

Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]

»16.09.23 - 16:05

ernsteiswuerfel

# 17

Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

Sapphire HD 5450 Low Profile, 1024 MiB, SKU: 11166-02, VGA/HDMI/DVI-I, Generation: Evergreen
Does not work on MorphOS 3.18 (screen stays blank).

Code:

# lspci -vv -s 0001:06:00.0
0001:06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited / Sapphire Technology Caicos [Radeon HD 5450]
	Device tree node: /sys/firmware/devicetree/base/ht@0,f2000000/pci@3/pci174b,6000@0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 65
	Region 0: Memory at 90000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at 80140000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at 0000 [size=256]
	Expansion ROM at 80120000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8 (downgraded)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: radeon
	Kernel modules: radeon

Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]

»16.09.23 - 16:07

ernsteiswuerfel

# 18
Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

Ok, so far I tried 4 cards which would be suitable for bigfoots r600 driver.

Of the 4 cards the only one which works on my G5 11,2 is the Radeon HD4550, 512 MiB, Generation R700.

The other 3 cards which did not work on MorphOS were of Evergreen and Northern Islands generation and all got 1024 MiB RAM.
Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]
»16.09.23 - 16:10

man

# 19
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

ok
so what s the best card for powermac g5
»16.09.23 - 20:01

zukow

# 20
MorphOS Developer

Posts: 643 from 2005/2/9

From: Poland

still R500, X1950XT
»16.09.23 - 21:49

man

# 21
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

ok thanks for answers
»17.09.23 - 10:49

matt3

# 22
Priest of the Order of the Butterfly

Posts: 665 from 2004/2/10

Wanted to share that I got high resolutions screens working in MorphOS on my 4k monitor.

Right now I running in Ambient in 2560 x 1440 24bit and it works perfect so far, real nice to have serious real estate to use. I probably can get 3840 x 2160 working with more playing around but this resolution is really as high as I want to go on 27" So who would have thought that 4k was available in MorphOS.

I also had to tweak one of the screenmodes in Monitors to get them working, just copied a working lower resolution one and used that as a basis.

I'm using my same X1900 PPC Bios PCIe video card and I'm using a cheap DVI to DP converter. Please make sure you get the powered version of the converter or it will NOT work.
»21.09.23 - 17:21

Andreas_Wolf

# 23
Yokemate of Keyboards

Posts: 12085 from 2003/5/22

From: Germany

> who would have thought that 4k was available in MorphOS.

Everyone who reads MorphOS release news items or release notes ;-)

"MorphOS 3.8 also adds the ability to use state-of-the-art 4K displays in their native resolution."
https://morph.zone/modules/news/article_storyid_2215.html

"Allow up to 3840 pixel wide screens on R400 GPUs and above to support 4K display resolutions"
https://www.morphos-team.net/releasenotes/3.8
»21.09.23 - 19:02

matt3

# 24
Priest of the Order of the Butterfly

Posts: 665 from 2004/2/10

Quote:

Andreas_Wolf wrote:
> who would have thought that 4k was available in MorphOS.

Everyone who reads MorphOS release news items or release notes

"MorphOS 3.8 also adds the ability to use state-of-the-art 4K displays in their native resolution."
https://morph.zone/modules/news/article_storyid_2215.html

"Allow up to 3840 pixel wide screens on R400 GPUs and above to support 4K display resolutions"
https://www.morphos-team.net/releasenotes/3.8

Thanks for keeping me honest Andreas!

:)
»21.09.23 - 19:27

matt3

# 25
Priest of the Order of the Butterfly

Posts: 665 from 2004/2/10

I did find one issue thus far with Mplayer in that it refuses to play anything at this resolutions. If I back down to 1920 x 1200, no problem everything plays (although it does seem a bit slower in playback then when I was using 1600x1200).

Mplayer is getting really long in the tooth and could really use an update, is anyone maintaining it these days?

I also might pick up a 1950XT since that seems to work fine in PM's and should give a boost or maybe I will holdout to see where bigfoot's drivers yield good results.

[ Edited by matt3 21.09.2023 - 14:33 ]
»21.09.23 - 19:32

ernsteiswuerfel

# 26

Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

Sapphire HD 5450, 512 MiB, SKU: 11166-01, VGA/HDMI/DVI-I, Generation: Evergreen
Does not work on MorphOS 3.18 (screen stays blank).

Code:

 # lspci -vv -s 0001:06:00.0
0001:06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited / Sapphire Technology Cedar [Radeon HD 5000/6000/7350/8350 Series]
	Device tree node: /sys/firmware/devicetree/base/ht@0,f2000000/pci@3/pci174b,e164@0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 65
	Region 0: Memory at 90000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at 80140000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at 0000 [size=256]
	Expansion ROM at 80120000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8 (downgraded)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: radeon
	Kernel modules: radeon

Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]

»24.09.23 - 16:19

ernsteiswuerfel

# 27
Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

So, after I tested 4 cards on my PCIe G5 11,2 for the r600 driver the only working one was the Sapphire HD 4550 HyperMemory, SKU: 11141-06 (https://www.techpowerup.com/gpu-specs/sapphire-hd-4550-hypermemory.b348).
Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]
»24.09.23 - 16:22

ThePlayer

# 28
Paladin of the Pegasos

Posts: 1068 from 2003/3/24

From: Hamburg/Germany

That's a little bit disappointing.
I am about to get an HD 5870 for my 11.2 G5.
And I have a working HD 4550 since last year displaying Ambient through HDMI in 3440x1440 in 32bit.
And Mplayer is working and playing videos up to 1080p in window and full screen.
PowerMac G5 Quad 2.5 running UWQHD Resolution
»25.09.23 - 16:57

man

# 29
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

5450
5870
https://morph.zone/modules/newbb_plus/viewtopic.php?topic_id=12785&forum=53&start=7
you certainly see that before
»25.09.23 - 17:38

Andreas_Wolf

# 30
Yokemate of Keyboards

Posts: 12085 from 2003/5/22

From: Germany

> https://morph.zone/modules/newbb_plus/viewtopic.php?topic_id=12785&forum=53&start=7
> [...] 5450

While comment #9 in that linked thread says that HD 5450 works, comments #17 and #26 in this very thread say it doesn't. So compatibility seems to depend on the specific card, not just the Radeon GPU, as has been outlined there.

> 5870

HD 5870 is not mentioned in the linked thread.
»26.09.23 - 00:50

man

# 31
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

5450
it was the same card i don t know
5870
why make this choice if not sure
thanks
»26.09.23 - 02:20

man

# 32
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

that doesn't matter
in fact (it's a develloper i think) tells that only the x1950 xt is the best card for the moment for powermac g5
and not hdxxxx
thanks
»26.09.23 - 05:34

ernsteiswuerfel

# 33
Priest of the Order of the Butterfly

Posts: 545 from 2015/6/18

From: Funeralopolis

Quote:

Andreas_Wolf schrieb:
> https://morph.zone/modules/newbb_plus/viewtopic.php?topic_id=12785&forum=53&start=7
> [...] 5450

While comment #9 in that linked thread says that HD 5450 works, comments #17 and #26 in this very thread say it doesn't. So compatibility seems to depend on the specific card, not just the Radeon GPU, as has been outlined there.

Yes, I had a HD 5450 that worked once. Unfortunately I sold this card years ago when bigfoots r600-3D driver was not in sight.

The two Sapphire HD 5450 I tried recently do not work. Also does not seem to be a simple memory size related issue to prevent r600-capable cards from working on the G5 11,2... The one HD 5450 got 512 MiB only and still does not work (despite my HD 4550 with 512 MiB works).
Talos II. [Gentoo Linux] | PMac G5 11,2. PMac G4 3,6. PBook G4 5,8. [MorphOS 3.18 / Gentoo Linux] | Vampire V4 SA [ApolloOS / Amiga OS 3.2.2]
»26.09.23 - 10:52

man

# 34
Acolyte of the Butterfly

Posts: 113 from 2019/11/11

ok it s more clear now
thanks for answers
»26.09.23 - 11:13