Single stepping through startup
  • Butterfly
    Butterfly
    emeck
    Posts: 92 from 2014/7/15
    Hello,

    recently I had a cli window opening and closing closing very fast, just after Ambient's screen title bar showed and before the sbar modules loaded, so couldn't read the message. In the end, it was caused by a wrong path in user-startup.

    But that made me wonder if there is a way to single step through the startup-sequence and user-startup at boot in MOS?

    I remember using that looong ago with ms-dos, hitting F5 I think, and stepping through config.sys and autoexec.bat line by line, executing the ones I wanted.

    Don't remember if that is available for any Amiga like OS...
    PowerBook 5.2 MorphOS 3.11
    PowerBook 5.8 MorphOS 3.11
    Amiga 1200 BPPC/BVision AOS4.1 FE
  • »28.08.19 - 19:58
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    polluks
    Posts: 438 from 2007/10/23
    From: Gelsenkirchen,...
    At least you have Code:
    set echo on
    Pegasos II G4: MorphOS 3.9, Zalman M220W · iMac G5 12,1
    Power Mac G3: OSX 10.3 · PowerBook 5,8: OSX 10.5, MorphOS 3.11
  • »28.08.19 - 21:13
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 10539 from 2003/5/22
    From: Germany
    Support for AmigaOS 3.9's "set interactive on" would be nice.
  • »28.08.19 - 21:45
    Profile