You need amiga-os-310-workbench files. No rename anything.

[ Edité par Papiosaur 30.09.2013 - 06:57 ]

Quote:

Merci beaucoup - Tout fonctionne très bien maintenant!

@papiosaur

As I reported above, I managed to installed both kickstart roms (after renaming them so they could be recognized by E-UAE).

I'm also able to play some adf games using the Run in E-UAE (A500) preset. I haven't yet been able to use the A1200 preset.

But I want now to configure and being able to use the rhLauncher. So I opened the rhLauncher and clicked in the Settings tab, to find that the paths point to directories not found in my system. Before I mess up things, and since I'm using Chrysalis, please let me know what do I need to the change the following paths to point to:

E-UAE Executable Systen:emuls/e-uae/e-uae
Kickstart images System:emuls/e-uae/kickstarts
Disk images System:emuls/e-uae/roms

As you told me my kickstarts are in System/Emulation/E-UAE/Roms (this is kick.rom for Kick rom 3.1 and kick13.rom for Kick Rom 1.3). Then my workbench adf is in System:Emulation/E-UAE/HardDisks/Workbench/

I'd appreciate again your help as I thing I'm getting somewhere

Hi WeiXing3D,

Thanks a lot for your return, i must correct this bad paths !!!

good path are

E-UAE Executable Systen:Emulation/e-uae/e-uae
Kickstart images System:Emulation/e-uae/Roms
Disk images System:Emultion/e-uae/Floppies

[ Edité par Papiosaur 30.09.2013 - 06:56 ]

[@papiosaur Thanks for confirming the paths to use in rhLauncher.

I have more questions:

1. Why when I restart rhLauncher it only finds "1 kickstart and 7 roms in seven groups," when I have 2 roms in System:Emulation/E-UAE/Roms and nothing else?

2. Why it only sees 1 kickstart rom? How can I determineI which rom is not being found by rhLaunch?

Besides those 2 roms I only have one adf (wrokbench) in System:Emulation/E-UAE/HardDisks.

1. Why when I restart rhLauncher it only finds "1 kickstart and 7 roms in seven groups," when I have 2 roms in System:Emulation/E-UAE/Roms and nothing else?
2. Why it only sees 1 kickstart rom? How can I determineI which rom is not being found by rhLaunch?

>"roms" for rhlauncher correspond to your ADF (Floppies drawer)
I have 2 kickstarts in Roms drawer too but Rom1.3 is not recognized (only 256 Ko), i don't know why, maybe we can found another Rom1.3.


Besides those 2 roms I only have one adf (wrokbench) in System:Emulation/E-UAE/HardDisks.

>You must mount Worbench 3.1 ADF and copy "all files" from it to System:Emulation/E-UAE/HardDisks...

After you can launch any Apps 68k and Whdload game directly from Ambient (Launch with E-UAE (1200) in contextual menu).

[ Edité par Papiosaur 30.09.2013 - 22:14 ]

@papiosaur Thanks to you help we are going places

I have tested my to rom images (kick13.rom and kick.com) by launching games using the Run in E-UAE A500 and A1200 shortcuts, but when I select the option Run in UAE instead, I get an error message reading "Failed to load kickstart image kick.rom"

How come if the same rom works with the other shortcuts? Or, is it not related to the roms saved in SYSTEM:EMULATION/E-UAE/Roms?

Also, if this is not too much trouble, could you please explain how can I do this "After you can launch any Apps 68k and Whdload game directly from Ambient (Launch with E-UAE (1200) in contextual menu) mentioned in your last post?

Thank you.

Hi!

Sorry to be brining this old thread up but I am partially in the same boat with WeiXing3D, since I want to configure UAE as well :)

My questions:

1) In which exactly path I should I put the WHDLoad key?
2) How do I disable the visual filter on UAE? (graphics look altered/smoother than the original, in all games I have tried)
3) How do I change/configure the mouse/joy ports? I.e. mouse on port 0 + Joystick on Port 1 or two Joysticks in both Ports.
4) I get the same kickstart error with WeiXing3D once executing the A1200 shortcut option (A500 runs well).
5) Regarding WHDLoad execution, after I install everything (with Workbench disk etc), do i just right click on the .slave and execute it under A1200 emul?

General MorphOS questions:

1) Is there a calibration utility for USB Joystics?
2) Is it possible to make use of the obsolete gaming ports found in some SoundBlasters?

Come on, there must be someone who can answer my questions :)

Hi, this is some answers:

1) In which exactly path I should I put the WHDLoad key?
>You must copy this file to workbench:c/ directory.

3) How do I change/configure the mouse/joy ports? I.e. mouse on port 0 + Joystick on Port 1 or two Joysticks in both Ports.
>I think you can change this in your UAE config file.

5) Regarding WHDLoad execution, after I install everything (with Workbench disk etc), do i just right click on the .slave and execute it under A1200 emul?
>yes, your games must be on a path specified in your UAE config file.

Quote:

The truth is that I never went pass the minimum configuration necesary to right click on adf and have it running in Run-In-UAE (A1200) and A500.

I have never been able to configure or use the rhlauncher or UAE Launcher.

I wish RunInUAE worked as good as it does in OS4.1

Why don't lauch your games via a nice worbench lauched via E-UAE as Pack Ultimate 68k ?

http://www.meta-morphos.fr/download/pack68k_1.3.run
http://www.meta-morphos.fr/download/pack68.txt (in french)

Must extracted after a fresh installation of Workbench 3.1

[ Edité par Papiosaur 08.12.2013 - 21:30 ]

Quote:

I am running and using Pack Ultimate in its latest version fro MOS 3.3 but I don't have, or I haven't found a "nicely configured E-UAE." othern than the UAE Launcher developed by Samuel Devulder. The launcher is pre-configured for A500 only.

Unfortunately, I'm still clueless when it comes to cinfigure and and use E-UAE in Morphos.




[ Edited by WeiXing3D 08.12.2013 - 18:34 ]

[ Edité par Papiosaur 08.12.2013 - 21:30 ]