MorphZone

TV Karte und Morphos / Pegasos

Peggy

# 1
Just looking around

Posts: 7 from 2003/6/22
»30.07.03 - 15:26

JKD

# 2
Order of the Butterfly

Posts: 456 from 2003/4/4

From: South of heaven

Wrong language forum and my German is terrible but I think you need Visionary:

http://www.vgr.com/visionary/

Steve
»30.07.03 - 17:05

merko

# 3
Order of the Butterfly

Posts: 328 from 2003/5/19

Is anyone running Visionary under MorphOS?
»31.07.03 - 10:28

HAK

# 4
Order of the Butterfly

Posts: 225 from 2003/2/24

From: Austria, Vienna

@ merko,

Yes, me.

Bye HAK
»31.07.03 - 11:20

Wizor

# 5
Just looking around

Posts: 8 from 2003/2/27

Oh.So any BT8x8 tv-card should work at the moment?

hmm..i think i'll try this a bit in the future :)
-W
»13.08.03 - 19:42

DJBase

# 6
Priest of the Order of the Butterfly

Posts: 745 from 2003/4/6

From: Germany

WinTV Go and Visionary should run perfect if you have a Voodoo card inside. Someone reported problems with Radeon cards.
Mac mini, PowerPC G4 1.5 GHz, ATI Radeon 9200 64 MB, 1 GB RAM, 80 GB HDD, MorphOS 3.18
PowerBook, PowerPC G4 1.67 GHz, ATI Radeon 9700 128 MB, 2 GB RAM, 250 GB mSATA HDD, MorphOS 3.18
»13.08.03 - 21:05

HAK

# 7
Order of the Butterfly

Posts: 225 from 2003/2/24

From: Austria, Vienna

Hi,

I might be this "someone" in a german thread.

But don't forget that I compared a PCI (Voodoo3) with an AGP
(RadeonVE) gfx-card.
So this could also be a possible problem source - as I don't have
other cards I can't test it unfortunately.

Bye HAK
»13.08.03 - 22:27

magnetic

# 8
Yokemate of Keyboards

Posts: 2129 from 2003/3/1

From: Los Angeles

Due to the crappy Articia S Northbridge chip on Peg 1 there is problems with AGP > to PCI transfers, hence Visionary ONLY works with PCI Gfx cards and PCI tv cards! :/
magneticv
Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
»14.08.03 - 01:29