Pegasos II on board headers
  • Just looking around
    gazsp
    Posts: 9 from 2004/5/24
    Hi all, I'm looking into possibly buying a Pegasos II and i was wondering if the Peg has onboard USB and sound headers.
  • »31.08.04 - 17:37
    Profile
  • Butterfly
    Butterfly
    Ronald
    Posts: 80 from 2004/3/17
    From: Québec
    Like this? :-?
    - Ronald
  • »31.08.04 - 18:25
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    takemehomegrandma
    Posts: 2720 from 2003/2/24
    Quote:


    gazsp wrote:
    Hi all, I'm looking into possibly buying a Pegasos II and i was wondering if the Peg has onboard USB and sound headers.


    Yes it has! :-)

    It has the following headers on the motherboard (in addition to the connectors on the rear panel):

    1 Firewere (standard motherboard connector)
    1 USB (on the "geeky" header-row)
    1 IR (on the same row)
    1 I2C bus (on the same row)

    *AFAIK* 1 Second Gigabit Ethernet (needs a not yet available tool/PCB "connector" that connects to the small slot just above the CPU card (where the PSU connector was on the Peg1))

    1 Audio In (CD In)
    1 Audio In (Video In)
    1 Audio In (AUX In)
    1 Headphones
    1 Microphone

    + the regulars, such as various LED's, internal speaker, etc.

    :-)

    [ Edited by takemehomegrandma on 2004/8/31 20:30 ]
    MorphOS is Amiga done right! :-)
    MorphOS NG will be AROS done right! :-)
  • »31.08.04 - 18:29
    Profile
  • Just looking around
    gazsp
    Posts: 9 from 2004/5/24
    Thanks!
  • »31.08.04 - 20:26
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    Posts: 199 from 2004/2/9
    Gazp, you will find all information on
    http://www.pegasosppc.com/tech_specs.php

    AFAIK there are still board available for sale online
    ( same website :))
  • »01.09.04 - 09:59
    Profile
  • Butterfly
    Butterfly
    ultraspec
    Posts: 94 from 2004/1/29
    Whose crazy idea was it to put the USB pins in that weird configuration anyway? It makes adding hardware more difficult.
  • »01.09.04 - 17:21
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    Neko
    Posts: 301 from 2003/2/24
    From: Genesi
    The plan is to produce plug-in boards which expose such functionality, adapting to whatever casing/peripheral needs were necessary.

    The reason there is only one USB port is because the AGP spec dictates that USB should be made available on the AGP slot - 2 ports on back, 1 port on the front panel and one for AGP makes 4 - the maximum on the Via 8231.

    You could always connect a USB hub to that single front connector.

    Neko
    Matt Sealey, Genesi USA, Inc.
    Developer Relations
    Product Development Analyst
  • »01.09.04 - 19:17
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Posts: 979 from 2003/6/28
    @Neko

    Why is there the USB? For what is needed?
  • »01.09.04 - 20:05
    Profile
  • Just looking around
    gazsp
    Posts: 9 from 2004/5/24
    Um, card readers, memory sticks, mice, keyboards, printers, scanners, cameras etc. :-)
  • »02.09.04 - 06:33
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Posts: 979 from 2003/6/28
    gazsp, please reply after read the thread correctly, I was said the USB on AGP...
  • »05.09.04 - 15:46
    Profile
  • Just looking around
    Jope
    Posts: 9 from 2003/3/30
    Quote:


    timofonic wrote:
    @Neko

    Why is there the USB? For what is needed?

    Macs make use of this: usb is routed to the DVI connector -> you only need one cable to get everything you need to the monitor..

    USB is used for:
    - audio
    - many monitors have usb hubs
    - some monitors can be software controlled..
  • »06.09.04 - 08:05
    Profile
  • Butterfly
    Butterfly
    ultraspec
    Posts: 94 from 2004/1/29
    For a real-world example of what I'm talking about, I just got an internal card reader which has some kind of a plug with a pin configuration which I guess is common on PC motherboards.

    To get it to work with the Peg, I will need to cut the plug off and connect each wire to the corresponding pin. I think there are tools that help a person do this without having to use a soldering iron but it is still kind of a pain in the butt :)
  • »10.09.04 - 19:51
    Profile Visit Website