Forum Index
 » 
User Forums
 » 
Hardware
TV Out ;)
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Tcheko
    Posts: 536 from 2003/2/25
    From: France
    Hello,

    I'd like to display my voodoo 3 3000AGP+ TV out on a TV but with no success.

    Does TV out activated?

    Tcheko.
    Quelque soit le chemin que tu prendras dans la vie, sache que tu auras des ampoules aux pieds.
    -------
    I need to practice my Kung Fu.
  • »24.03.04 - 18:27
    Profile Visit Website
  • Paladin of the Pegasos
    Paladin of the Pegasos
    Jupp3
    Posts: 1193 from 2003/2/24
    From: Helsinki, Finland
    Firmware prompt shows through my Radeon 9100's composite out, but not morphos... At least not yet :-)
  • »25.03.04 - 05:20
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Tcheko
    Posts: 536 from 2003/2/25
    From: France
    Quote:


    Jupp3 wrote:
    Firmware prompt shows through my Radeon 9100's composite out, but not morphos... At least not yet :-)


    Ha.

    Boo. I want the TV out to watch DVD & other vid on my TV Set.

    I Want Dolby Digital too!

    I Want firewire!

    Come on Genesi!
    Quelque soit le chemin que tu prendras dans la vie, sache que tu auras des ampoules aux pieds.
    -------
    I need to practice my Kung Fu.
  • »25.03.04 - 07:34
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    MarK
    Posts: 641 from 2004/1/25
    From: Prague, The Cz...
    Hi ppl!

    I'm not sure, if it works with Voodoos, but it does with Radeon 9k. Atleast with mine, I get a TV output signal. Well, I didn't set the frequencies correctly, so I got a scrolling and bad picture out of my television, but the signal is there. I will try to play a bit more with it and will tell the results...

    Bye, MarK.
  • »25.03.04 - 08:57
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Posts: 979 from 2003/6/28
    I would like an VGA to SCART adapter and put MorphOS in 15khz mode, It's possible?
  • »25.03.04 - 11:21
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Tcheko
    Posts: 536 from 2003/2/25
    From: France
    Quote:


    timofonic wrote:
    I would like an VGA to SCART adapter and put MorphOS in 15khz mode, It's possible?


    Yes. With third party hardware vendor.

    Solutions are easly to reach with gogole.
    Quelque soit le chemin que tu prendras dans la vie, sache que tu auras des ampoules aux pieds.
    -------
    I need to practice my Kung Fu.
  • »25.03.04 - 11:25
    Profile Visit Website
  • Yokemate of Keyboards
    Yokemate of Keyboards
    magnetic
    Posts: 2129 from 2003/3/1
    From: Los Angeles
    Hi MarK

    Please clarify this? You have Morphos shown on video output? I have a Radeon 9K PCi here didnt test vid out though... please provide verbose details

    tia

    magnetic
    Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
    Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
  • »25.03.04 - 16:07
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    MarK
    Posts: 641 from 2004/1/25
    From: Prague, The Cz...
    No, I'm able to open a screen, that send the signal to tv-out. I weren't able to setup the frequencies to get a stable picture, but once I get the signal, there must be a way to synchronize it and make it working, like it does in OpenFirmware. I'll test it again when I'll get back to my peggy and will investigate a bit more :-)

    And don't forget to turn off the DVI!!!

    Bye, MarK.
  • »26.03.04 - 06:02
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    maurensen
    Posts: 358 from 2003/10/3
    From: Padova - Italy
    Mark, excuse me, any news about TV-OUT?
    I have a RADEON 9200SE in my Peg 2 and i'm
    only able to see corrtectly the OF in the TV,
    afterthe boot, nothing else.
    Someone has the tv-out working in peg??

    Ciao.
    -------------------
  • »10.04.04 - 17:06
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    magnetic
    Posts: 2129 from 2003/3/1
    From: Los Angeles
    I am going to say this one more time

    TV OUT DOES NOT WORK ON PEGASOS WITH LINUX OR MORPHOS ATM

    magnetic
    Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
    Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
  • »10.04.04 - 19:53
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    catohagen
    Posts: 297 from 2003/5/20
    But I'll say its pretty important to fix this asap, as for if you think of for example polyhead's comment about morphos being unusable and years behind mainstream os'es, with tv-out enabled it would be a good multimedia homesystem for playing divx on tv and music on your stereo, using low powered g3, compared to use a noisy pc system.
    I'll imagine all parents with small kids are tired of kids throwing disney dvd's and other film on the floor and scratching them unusable.
    With a pegasos and tv-out you can show films faster and keep your orginal dvd's safe.

    Morphos developers should set higher priority on this(my opinion ofcource)

    This was one of the reasons i bought a pegasos,or atleast what i told my wife what to use it for :-), but never imagined it should be so difficult to get the tv-out working.

    Maybe in a new months OS4 with tv-out on SNAP drivers will be here in my livingroom showing my kids movies :-)
  • »10.04.04 - 21:53
    Profile
  • dan
  • Cocoon
    Cocoon
    dan
    Posts: 55 from 2004/4/11
    From: Sweden
  • »11.04.04 - 12:00
    Profile