Hi all !

I've a Peg I with a voodoo5 board on AGP bus.
Sound outpout is totally corrupted as soon as I scroll in Voyager window, even when Voyager loads a web page the music is slowing down....

Is it something to do against this nasty bug ?

TIA

--edit--

Hi MikePig,

I'm really not qualified to entirely answer your question, but,
from my observation, Voyager will eat up to 100% CPU when scrolling
through some windows, this according to "TaskManager".

IBrowse does not exhibit this "sound" problem, and it's CPU usage
when scrolling through windows is considerably less.

Basically, my *guess* is that the sound corruption problem
is related to both Voyager (specifically), as well as general instances
of high CPU usage. I do not believe, from my experience, that there is
any "sound bug" which afflicts MorphOS.

Both my Mac and Athlon experince similar characteristics,
only actually a bit *worse* than my Pegasos.

Slightly unrelated...but I just ordered a new SB for my Peg...
I'm VERY curious to see how it handles these situations
in comparison to the onboard sound.

-D-

No problem!

Please start RexxMast >NIL: in your shell or put this in your user-startup sequence.

Thats it...

Ciao Mario

Hi MikePig

The voodoo5 is not the problem, i quest the pci-system in the kernel is the possible reason, try
to contact the boys from genesi.

I have a question, your voodoo5 is assigned as a
voodoo5 or voodoo4, System-Prefs/Screenmode?

On my PegasOSII/MOS1.4 i have only the Voodoo4,
its the same on yours?

Best wishes

Raoul.

Hi !

Thanks all for your help !

Yes, Raoul MOS1.4 reports the Voodoo5 as Voodoo4, as far as I knowit's
caused by the CGX Voodoo driver.

To MaSch : that's great ! V is now working,loading,scrolling.....and I
can still listen music.

Bye

Hello,
same problem with PegII/G4 MOS1.4.1 and Radeon 9200se :(

Some programs with MUI interface cause same problem.

Hallo MikePig,

Have you test the Warp3D-Demo "Engine" on the
Voodoo5?

I see Screencorruptions in 800x600 but 137 FPS.

Same way looks Freespace in Warp3D-Mode.

Did have any access to a quake-, doom- and
heretic-clone for morphos that works fine?
Especially quake-Warp3D or GLQuake with a working
sound-support for ahi?

I have try many port's, but only working thing is
adoom-mos, but it does'nt load my saved games.
Any tips?

Give it any Warp3D- or Rave3D-Demos to test the
Voodoo5(4)-drivers funktionability. I think this actual Voodoo4-driver has errors, i had never seen
clean graphical results. Did you see better results?

Best wishes

Raoul.

Hello Reaul,

i don't have a V5, but a Voodoo4 in my Peg!
There is no problems at all on several games
in Warp3D-mode!!!
Here my tested applications/games:
HereticII, Shogo, QuakeII (Hyperion), GlQuake-WOS (beta11 from Massimilano Tretene) , WipeOut2097.
All games runs properly without any errors!
I think, it was better when you test the Voodoo5 or check your configuration...

Greetings MaSch

@ MikePig

Now, after a long time of testing, i can say not
the mos-quarkkernel is the probleme, for me
it looks now, that the OF is the reason for the
V5-problems, some pci-listing shows me a badly
addressed pci-pipeline, so that only the second
GPU is "mountet" on this pipeline, also the
colorchannels are inverse'd.

Please test it with LinuxPPC-XServer (tdfxfb), the same on MOL (MacOSX)!

I wish that i can present better news, but now
it's no more in our hands, this job goes to
Genesi or MDC! it looks like the little- vs. big-
endian thing is real source. :(

Best wishes

Raoul.