PPC Laptop, something for MorphOS?
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12586 from 2003/5/22
    From: Germany
    Update:

    > https://www.powerpc-notebook.org/2026/03/we-are-ready-for-prototype-production/

    Schematics of the desktop board published and old donations repurposed:

    "On the 24th of April 2026 we published on our GitLab repository [...] the OrCad schematics source, converted to Altium and then imported into KiCad [...]. [...] On 6th April 2026, thanks to the funds collected for the Notebook CE certification and due to the temporary halt of Notebook motherboard production, the association used €2,130 from that previous campaign to pay and balance the Desktop Schematics design costs that are €6,250. A further €8,000 from association funds was used to pay a portion of the PCB costs in advance. The total cost of the PCB design is around €12,500; since €8,000 came from association funds, we have reduced the goal of the PCB donation campaign to €4,500."
    https://www.powerpc-notebook.org/2026/04/kicad-schematics-sources-published-waiting-funds-for-prototypes/

    With this, the financial state of all campaigns/phases is as follows:

    I_0. 12600 EUR: Electrical schematics [accomplished]
    I_1A. 19000 EUR: PCB [accomplished]
    I_1B. 5000 EUR: Fast SI bus simulations [accomplished]
    I_2. 13500 EUR: Prototypes [accomplished]
    I_3. 14000 EUR: Testing [accomplished]
    I_4. 12500 EUR: Certification [19% done]
    I_5. 5357 EUR: Prototypes and MXM graphics cards [accomplished]
    II_1. 1000 EUR: JTAG debugger [accomplished]
    II_2. 5000 EUR: U-Boot [accomplished]
    II_3. 8000 EUR: Fix everything that's broken [accomplished]
    III_1. 6250 EUR: Electrical schematics (desktop) [accomplished]
    III_2. 12500 EUR: PCB (desktop) [74% done]
    III_3. 9000 EUR: Prototypes (desktop) [0% done]
    III_4. ??? EUR: Testing (desktop)
  • »17.05.26 - 19:05
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12586 from 2003/5/22
    From: Germany
    Update:

    > The donation goal for the desktop prototypes has been
    > silently increased from 9000 EUR to 11000 EUR:
    > https://www.powerpc-notebook.org/2026/06/15-of-donations-for-prototypes-production-of-powerboard-tyche-desktop/

    The donation goal for the desktop prototypes has been decreased from 11000 EUR to 9100 EUR by reducing the amount of prototypes from 5 to 3:

    https://www.powerpc-notebook.org/2026/08/late-september-prototypes-could-arrive/

    With this, the financial state of all campaigns/phases is as follows:

    I_0. 12600 EUR: Electrical schematics [accomplished]
    I_1A. 19000 EUR: PCB [accomplished]
    I_1B. 5000 EUR: Fast SI bus simulations [accomplished]
    I_2. 13500 EUR: Prototypes [accomplished]
    I_3. 14000 EUR: Testing [accomplished]
    I_4. 12500 EUR: Certification [19% done]
    I_5. 5357 EUR: Prototypes and MXM graphics cards [accomplished]
    II_1. 1000 EUR: JTAG debugger [accomplished]
    II_2. 5000 EUR: U-Boot [accomplished]
    II_3. 8000 EUR: Fix everything that's broken [accomplished]
    III_1. 6250 EUR: Electrical schematics (desktop) [accomplished]
    III_2. 12500 EUR: PCB (desktop) [accomplished]
    III_3. 9100 EUR: Prototypes (desktop) [41% done]
    III_4. ??? EUR: Testing (desktop)
  • »17.08.26 - 07:38
    Profile
  • Moderator
    Kronos
    Posts: 2593 from 2003/2/24
    Quote:

    Andreas_Wolf wrote:
    but still nothing about pre-orders or production.


    They better don't at this point as they clearly haven't got to the point of testing the boards as they got them less than 24h prior.

    Something similar to bPlan in Cologne 2001 when they had the 2 ZIF proto board running MorphOS 0.8 and an early sample of the production Pegasos1 with a ZIF_2_SlotA carrier card behind glass.

    Well minus having the running proto that is ;)

    Might be that a simple cycle of writing the firmware and power on yields a fully working system, might be that they'll end up announcing a new pope.

    But... going on by what I know/suspect:

    - a 2081 Mirari would be 2-300€ over the 1042 one
    - 2081 and 2080 are the same silicon with the 2080 offering more IO at the cost of requiring more layers on the PCB to make use of that IO
    - the PPC Laptop guys have so far done everything for money or paid someone with the actual skills to do a job (with mixed results so far)
    - ACube isn't known to be a charity
    - whatever the final deal is with that new kernel, someone will want to put his fingers into HW sales no matter what

    So my guess is at least 1k€ + VAT, might even get close to X5000 prices.
  • »28.09.26 - 14:16
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    pampers
    Posts: 1074 from 2009/2/26
    Yay, finally something. When laptop got cancelled got a feeling that all my donations went to shit but good to see the desktop as well.
    MorphOS 3.x
  • »30.09.26 - 16:15
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    cip060
    Posts: 153 from 2010/7/30
    My understanding is that the laptop project hasn't been cancelled; instead, development has been redirected to this board as a priority.
  • »01.10.26 - 08:28
    Profile
  • MorphOS Developer
    jacadcaps
    Posts: 3360 from 2003/3/5
    From: Canada
    ... they could have simply ordered a couple of Mirari boards at this point.
  • »02.11.26 - 10:48
    Profile Visit Website
  • Just looking around
    Xersipan
    Posts: 16 from 2025/12/30
    introducing - django - a - compact - and - cheap - board

    Even the "Mirari's" Django motherboard layout - with its small, cheap
    processor lacking Altivec and featuring only
    one memory bank - is a failure.

    In June 2025, NXP provided the latest T2080 RDB / Tyche design.
    In October 2025, schematics were done. By March 2026, the
    PCB layout was complete.

    You might as well use these Mirari motherboards as a
    breakfast tray in the kitchen.

    It will never be a high-quality product.
  • »02.11.26 - 11:11
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    sailor
    Posts: 483 from 2019/5/9
    From: Central Bohemi...
    @Xersipan
    if something is or is not high quality has nothing with size or power. It is about quality itself.

    If you spent some time by reading https://mirari.vitasys.nl/our-story/ you find here: goal is to create a new, low-cost next-gen Amiga mainboard.
    And - to achieve this goal - at first CPU with lower price was selected. Tyche has probably other goal, so it use other CPU.

    BTW, I have proto 2 of Mirari. I also own ACube products. Quality and support of all of them is high.

    [ Edited by sailor 02.11.2026 - 12:40 ]
    AmigaOS3: Amiga 1200
    AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, Sam460LE, AmigaOneX1000
    MorphOS: Efika 5200b, Pegasos I, Sam460LE, Pegasos II, Powerbook G4, Mac Mini, iMac G5, Powermac G5 Quad
  • »02.11.26 - 11:35
    Profile
  • Moderator
    Kronos
    Posts: 2593 from 2003/2/24
    It’s simple:

    Mirari works and is reasonably priced.

    Tyche exists as a proto but hasn’t been seen working in any capacity yet. Availability and pricing unknown.
  • »02.11.26 - 14:21
    Profile
  • Moderator
    Kronos
    Posts: 2593 from 2003/2/24
    Also putting a 2nd memorial slot on the board only makes sense if….

    … the SoC has 2 memory channels, doubt thats true for anything that is an option here
    … you want to put a lot of RAM in, DDRL SODIMM can easily be had at 16GB which is already overkill for such systems

    Actually, putting 2 slots in series will create problems least of which would be slightly worse timings
  • »02.11.26 - 17:09
    Profile
  • Just looking around
    Xersipan
    Posts: 16 from 2025/12/30
    Anyone who doesn't see a difference in quality - neither in
    terms of future technical capabilities nor in terms of
    layout - between these two motherboards, that
    is, between Tyche and Mirari, will certainly
    be satisfied with Mirari or everything.

    Even the motherboard of the X5000 AEON had been
    equipped with '2' memory banks. -))

    It will be up to the customer / user to decide which
    motherboard wins the competition / race - or
    rather, the “religion.”

    The Tyche motherboard will have no
    problems with memory.

    [ Editiert durch Xersipan 02.11.2026 - 19:16 ]
  • »02.11.26 - 18:07
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    sailor
    Posts: 483 from 2019/5/9
    From: Central Bohemi...
    Quote:

    Xersipan wrote:
    It will be up to the customer to decide
    which motherboard wins the competition

    Yes.
    AmigaOS3: Amiga 1200
    AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, Sam460LE, AmigaOneX1000
    MorphOS: Efika 5200b, Pegasos I, Sam460LE, Pegasos II, Powerbook G4, Mac Mini, iMac G5, Powermac G5 Quad
  • »02.11.26 - 18:16
    Profile
  • Moderator
    Kronos
    Posts: 2593 from 2003/2/24
    Well instead of BSing around ( I‘d say over 10 years and 6figure sum of ebegging is just enough) why don’t you tell us where the differences are. I mean sure purple is a bit odd and they went a bit more costsensetive with parts and design but none of that say anything bout quality.

    So what is it? Subpar capacitors? A too thin PCB? No ground? Bad routing?
  • »02.11.26 - 18:22
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    sailor
    Posts: 483 from 2019/5/9
    From: Central Bohemi...
    Quote:

    Kronos wrote:
    Also putting a 2nd memorial slot on the board only makes sense if….

    … the SoC has 2 memory channels, doubt thats true for anything that is an option here
    … you want to put a lot of RAM in, DDRL SODIMM can easily be had at 16GB which is already overkill for such systems

    Actually, putting 2 slots in series will create problems least of which would be slightly worse timings


    T2080 has only one channel, but it has bank interleaving. It is faster with more banks (upto four), so two memory chips could be faster than one.


    [ Edited by sailor 02.11.2026 - 19:28 ]
    AmigaOS3: Amiga 1200
    AmigaOS4: Micro A1-C, AmigaOne XE, Pegasos II, Sam440ep, Sam440ep-flex, Sam460LE, AmigaOneX1000
    MorphOS: Efika 5200b, Pegasos I, Sam460LE, Pegasos II, Powerbook G4, Mac Mini, iMac G5, Powermac G5 Quad
  • »02.11.26 - 18:26
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12586 from 2003/5/22
    From: Germany
    > "Mirari's" Django motherboard layout

    What let you arrive at the conclusion that Mirari is based on Django?

    > In June 2025, NXP provided the latest T2080 RDB / Tyche design.

    NXP did not provide any Tyche design.
  • »02.11.26 - 21:36
    Profile