Noob questions
  • Cocoon
    Cocoon
    Lastic
    Posts: 45 from 2021/6/7
    Since I am not an old Amiga user and thus not versed in Amiga syntax and/or MorphOS syntax,
    I wanted to create this topic here to bundle the questions that pop-up in my mind whilst getting to know MorphOS a bit better since I am using it quite a bit now.

    I acquired a Powerbook G4 from user Pentona here , for which I am thankfull, the machine has
    already proved its worth a lot.

    It's this one
    https://everymac.com/systems/apple/powerbook_g4/specs/powerbook_g4_1.5_15_2.html

    Anybody have any experience with screen recording on these and how to do it ?

    EDIT OK should have searched for HDMI instead of screen recording, found this topic.

    https://morph.zone/modules/newbb_plus/viewtopic.php?topic_id=12386&forum=11

    2nd questions, is there like a Shell/CLI command to make icons out of files and folders
    recursively ?
    Right now I am selecting all of them, pressing CMD-I and then batch press o for icon , s for save and press ENTER for Yes multiple times.

    3rd question on the forum I seem to miss out on replies on topics I created or participated because probably I forgot to check the Email Notification box ?
    Is there a way to do it for older topics where I forgot this option ?

    Thank you for your time and feedback !

    [ Edited by Lastic 25.10.2026 - 13:56 ]
  • »25.10.26 - 12:21
    Profile
  • Moderator
    Kronos
    Posts: 2593 from 2003/2/24
    A 5.6 with the BTO downgrade to 1.5GHz.... always knew they existed, never came across one.

    Since this model only has 64MB VRAM your out of luck on dualhead support (as in the external DVI running it's own separate display).
    It should have mirror output on the analog part of the DVI, so you got go down to VGA and then send this into a grabber.

    Or you could try hocking up a digital monitor (so DVI or with DVI-HDMI cable) and close the lid right after poweron /reset. This way you might get a FullHD display that should easy to daisychain through grabber.
  • »25.10.26 - 12:59
    Profile
  • Cocoon
    Cocoon
    Lastic
    Posts: 45 from 2021/6/7
    Looking into further expanding the Powerbook G4
    ( https://everymac.com/systems/apple/powerbook_g4/specs/powerbook_g4_1.5_15_2.html )

    Anybody using a PCMCIA card to SD-card adapter they can recommend ?
    SD and MicroSD combined would be even better.

    Or should I look into the probably slower USB to MicroSD/SD adapters ?

    Then wireless.

    I've read people are using that Netgear WG511T which should be 802.11g with 108 Mbps ?
    Is that the actual speed that can be achieved ? 802.11g spec is 54 Mbps.

    or is a PCMCIA 802.11a card a better option since it uses the less occupied 5 Ghz band ?
    If so anybody have any recommendations ?
  • »08.11.26 - 11:34
    Profile
  • MorphOS Developer
    jacadcaps
    Posts: 3360 from 2003/3/5
    From: Canada
    MorphOS won't support any 5GHz PCMCIA cards - I wasn't aware they exist? :) Do give built-in WiFi another chance on MorphOS 3.21, it should handle g speeds now at least.
  • »08.11.26 - 13:01
    Profile Visit Website
  • Cocoon
    Cocoon
    Lastic
    Posts: 45 from 2021/6/7
    Quote:

    jacadcaps wrote:
    MorphOS won't support any 5GHz PCMCIA cards - I wasn't aware they exist? :) Do give built-in WiFi another chance on MorphOS 3.21, it should handle g speeds now at least.


    I was assuming there are PCMCIA 802.11a cards since it is also an older Wifi standard from the 802.11 a/b/g area.

    I must admit that downloads in Wayfarer 12 and general networking feel faster in my 4 hours of running MorphOS 3.21 .

    Only reason wanting to get even better 802.11g speeds is when doing file transfers from my NAS to the Powerbook .
    Gigabit Ethernet on the Powerbook is already a huge plus but would be nice to get snappier 802.11g speeds also.

    Hence the WG511T question since 108 Mbps vs the theoretical 54 Mbps of 802.11g is already a big improvement.
  • »08.11.26 - 13:35
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12586 from 2003/5/22
    From: Germany
    > I was assuming there are PCMCIA 802.11a cards

    Indeed, there are.

    > 108 Mbps vs the theoretical 54 Mbps of 802.11g is already a big improvement.

    As of MorphOS 3.2, 108 Mbps mode wasn't supported by MorphOS. I don't know if this was added meanwhile.
  • »08.11.26 - 20:50
    Profile
  • Cocoon
    Cocoon
    Lastic
    Posts: 45 from 2021/6/7
    From what I can tell indeed , my 3.21 iBook and Powerbook now connect at 54 Mbit.

    And anybody have any suggestions for using a PCMCIA card to SD-card adapter they can recommend ?
    SD and MicroSD combined would be even better.

    Or should I look into the probably slower USB to MicroSD/SD adapters ?
  • »11.11.26 - 09:02
    Profile
  • Moderator
    Kronos
    Posts: 2593 from 2003/2/24
    AFAIK the PCMCIA slot only works with Atheros WLAN cards.
  • »11.11.26 - 09:52
    Profile
  • Caterpillar
    Caterpillar
    ncafferkey
    Posts: 39 from 2006/1/6
    AFAIK the 108 Mbps mode is a proprietary Atheros extension and only works with Atheros routers. Even then, it isn’t supported by the MorphOS driver.

    I think there are 802.11a Atheros cards, but again that mode is unsupported.
  • »18.11.26 - 08:07
    Profile
  • Cocoon
    Cocoon
    Lastic
    Posts: 45 from 2021/6/7
    A question on unzip

    the unzip 6.00 (April 2009) from the SDK seems to have issues with every ZIP that I copy from my Macbook to my G4 machines or download from the internet.

    "attempt to seek before beginning of zipfile (please check that you have transferred or created the zipfile in the appropiate BINARY mode and that you have compiled UnZip properly)"

    The one that works is ZipMOS aka UnZip 5.32 (Nov 1997) from aminet.

    Am I doing something wrong, because it would seem more logic that the newer unzip from the SDK should be able to extract modern ZIP files ?
  • »18.11.26 - 08:51
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    polluks
    Posts: 850 from 2007/10/23
    From: Gelsenkirchen,...
    Did you also try "xadunfile"?
    Help
    Pegasos II G4: MorphOS 3.9, Zalman M220W · iMac G5 12,1 17", MorphOS 3.18
    Power Mac G3: OSX 10.3 · PowerBook 5,8: OSX 10.5, MorphOS 3.18
  • »18.11.26 - 10:20
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    eliot
    Posts: 658 from 2004/4/15
    unzip in sdk is broken and will be hopefully fixed.
    xadunfile should work
    regards
    eliot
  • »18.11.26 - 11:36
    Profile
  • Cocoon
    Cocoon
    Lastic
    Posts: 45 from 2021/6/7
    Thanks for the info , I will look into xadunfile
  • »18.11.26 - 16:43
    Profile