Quote:

Yes I did - as you know, I have more MOS-Machines - one of them, a MINI, has only a plain installation of MOS to test those things.
At moment I cannot repeat this problem - I dont know the conditions for that issue.
Interessting for me is, that all this problems beginns with upgrading Wayfarer to V7.0, - without changeing anything else on this G5.

i suggest for speed up to update morphos with easy install the dependencies
the libs rexxsyslibs in os3.2 classic for exemple or amigafoul
screenotify.libray?
i dont know if classes or hollywood have impact

Somethings wrong with you whole setup it seems. Did you try on a fresh install of MorphOS?

Quote:

This won't work with big files, If default path is RAM: - PC will run out of memory! I've some files more than 7GB to download. At moment I need to define a HD-Partition for download (which I don't like for smaller, temporary files)
With V7.1 and all versions before 7.0, downloads where directly be stored in choosen path of "save-as" requester.....
Tried V7.1-backup again, to be sure, and it works as expected......

Edit: I found out something very estonishing: I tried now to download a file with OWB, and the download requester stands suddenly on the path, I have set as default in Wayfarer (CacheCD:), despite default path in OWB is RAM:!!! How can this be? I set RAM: manually in OWB download-requester and loaded down a file. Back to Wayfarer, suddenly the requester accepts now different pathes and loads down directly there!! What's going on here? How can OWB influence Wayfarer and vice versa?

I meant using the 2D acceleration of the graphics card. you mentioned something like that not a long time ago

@ Amigaharry2

Downloads always start in the default directory. When you use Save As..., the file will be renamed/copied to your chosen destination. This is done after the download has finished.

@ connor

Did you enable media playback for Youtube?

@cego

What 3d rendering engine?

Now I had time to test V7.2. Unfortunately the issue with the download-path occours again - Path of "Save as.." requester is ignored - always saves to the path, given in prefs.

Btw.: this time I updated by build-in-function of Wayfarer - so it should be OK.

How can I watch youtbue videos in Wayfarer? I have a PowerBook with 1.67 GHz. I tried the pages www.youtube.com and m.youtube.com. Both take minutes before they show up fully and I can enter a name to search for. Before it the CPU is on highest load and the fan is blowing for a minute or two. On both pages (www and mobile) the videos always say that the video cannot be played in my browser. I also switched to spoofing as Safari/iOS or Amazon stick but it does not start to play a video. Spoofing as Amazon stick it shortly loads a fist picture of the video and then comes back to "this video cannot be played in your browser". I also activated the youtube-no-gradient script but it does not help me. How does it work for others?
But I have the feeling that it takes so long to load (minutes) that it will not play the videos at a good speed

wow! really nice update! The speed increase is even noticable on a 1GHz G4 :)

@jacadcaps
is the 3D rendering engine going to speed up rendering even more or will it have a negative impact?

thank you.

@jacadcaps

Nice update and the speedup is really noticable, great work :)

finally it s setting.json that cause me a problem with youtube
no crash with 7.2

Can't tell whether 7.0, 7.1 or 7.2 made the difference as I did not check it for some time but now national TV broadcast is working again too with it's menu on my G5.

YT menu works too now and all in all 7.2 feels a little bit snappier. Nice!

@Primax

If you are spoofing as Safari/iOS you may need to enable Touch events emulation in Settings for Youtube.

i m not sure but the size of video is not the same on youtube and i have update hollywood only
i don t know what happens
more faster ok for all
thanks

Quote:

Honestly, I am bit confused because I had memorised that I should use the menu for fast-forwarding etc. But for stopping and playing I am supposed to use YouTube?

At least, double clicing in the middle of the video worked! Thanks, DayWalker!

There are not any proper YouTube controls. At least here, I cannot use the lower time slider. Does not work.

Apart from that: thanks for the new version! :)

PS: Wait!!! Just installed the latest version, and what shall I say? For the very first time, I can actually use the time slider!! It works! :)

[ Editiert durch Primax 19.12.2023 - 20:57 ]

Incredible!

Wayfarer 7.2 is now available, with the WebKit engine just 4 days behind the release of WebKitGTK 2.42.4.

2.42.4 addresses crashes in JavaScript, WebCore and several rendering issues.

Please update using the Check for Update & Autoupdate functionality built into Wayfarer.

Note: I've adjusted the maximum string length in WebKit to 64MB (from the original 2GB that makes no sense on 32bit architectures). While I do not anticipate problems, something might have broken. Do report if you find a site that worked OK with 7.1 but does not with 7.2.

The menu may not always work. It's meant as a workaround for sites that don't want to play on their own. Use normal YT controls and you'll be fine.

Quote:

I tested it on my G5 and I can stop it via clicking twice in the middle of the video (don't know if it's a desired behaviour). When I stop it, it stays like that until I click again in the middle of the video to continue playing.

Again I tested behaviour of YouTube videos with Wayfarer 7.1: here, on a X5000, it stopping a video definitely does not work.


I run a m.youtube video:
- if I try to pause it via cmd+Enter, then the video pauses for 20 seconds. This way it should work?? If yes, how can I stop it??
- if I try to pause it via menu, then the video only pauses for 5 or six seconds.

Please, can anybody check this?

Thanks!

Tanks very much for this new version, which runs very well here and much faster that previous versions, really great!

Thanks a lot also for having added "Save as text..." and "Save as HTML..", very helpful for me!

When I started up v7.1 of Wayfarer I got a system error flash and sound, that I never got when I used earlier versions of Wayfarer.

Anyone else had this trouble, &/or know what might be causing it ... or more importantly how to fix it?

I had a quick look in the LogTool, but I didn't see anything obvious that was related to Wayfarer, but that is exactly when I seem to get the screen flash & system error sound - on Wayfarer v7.1 starting up.

I have started up v7.0 and when I start it up I don't get the system error sound/flash that I do get with v7.1 ... v7.1 does start/load but I would have preferred to understand what was causing the issue rather than anything else.

[UPDATE] Anyway, I ended up swapping over a fresh download-archive of the program and now having copied that into my original installation directory the fresh installation seems to have resolved the problem, though what the problem was I have no idea.

youtube works perfectly now
thanks
not use chrome if you don t want the size of the video changing
if you look a lot of videos then less memory too
i dont use yt 2.4 for the moment