Quote:

No.

Parts where software hacked/accessed system structures need to be rewritten for sure, but beside that it simply should work.

Quote:

Well, those 68k mui classes, devices and etc will be obsolete when not using 68k applications anymore. Virus scanner? Seriously?

Sure we have no proper office applications. But those are even so old that a simple UAE can deal with them. Still not need to invent some PPC emulator.

However. You don´t know what will be available in 2017. Maybe those gabs are already closed by then. Who knows.

[ Edited by geit 13.10.2015 - 17:31 ]

There is one solution to the compatability problem: keep using your PPC MorphOS alongside your NG MorphOS until there is enough new software to take the place of the old. Your old computer is not going to stop working with an ISA shift.

Quote:

Yeah, I go through a lot of old Amiga stuff occasionally and it's a LOT quicker scan them on MorphOS than on a real Amiga :) Not to talk having much more storage on MorphOS machines...


Quote:

In a more optimal situation it'd be nice to see new general features still updated to PPC MorphOS alongside the NG version. That way users could happily continue using the PPC version, if old compatibility matters more than those features NG would offer, but maybe it's too demanding with the resources available...

[ Edited by jPV 13.10.2015 - 14:24 ]

Quote:
I thought the whole concept of MorphOS was to implement something like MacOSX did where you could run the classic OS inside a sandbox alongside the new modern OS.

Wasn't it the purpose of the ABox ?

If that's the case, as long as the OS runs on a PowerPC CPU, there is no compatibility problem. Of course, if running on x64, we can forget it.

Quote:

I'm afraid you are a bit optimistic.
Dropping all these 68k stuff will be for sure a drawback for most users. :)

We will have to re-implement a lot of libraries and small tools. Till now it was not done because the 68k versions did the job and performance was not an issue; but in case of 68k compatbility drop, a lot of small tools/libs will have to be re-done from scratch.

Not a big deal, but a lot of work.

Quote:

I'm not concerned with backwards compatibility, it was more a question of what will we use for our old stuff.

I'm all for any version of MorphOS that gives us the ability to move forward and make it easier for software to get ported or developed for this system. If it means leaving PPC, so be it. PPC *now* is ok, but in the long run is a hindrance. x86 gives us the raw power and access to much cheaper hardware.

Quote:

We'll get UAE quickly for sure. Hopefully a proper port of WinUAE will be easier. WinUAE would give us everything we need up to OS3.9 and Pup/Wup. Most important MorphOS native software can be recompiled. There will be a handful lost, but the gain certainly will be worth it.

PowerMac G5 w/MorphOS was the logical conclusion for me as an ex-Amiga user. They accomplished pretty much everything I wanted out of an "Amiga" over the years. The short time I owned a CyberstormPPC left me longing for exactly what we have now. Besides wanting a few things polished up in support of the G5, I think the whole PPC thing is played out. We need to get out of this sandbox and into the major league. I don't quite understand the left turn into OS4 hardware land, but this is their baby and they haven't disappointed yet. Hopefully this left turn doesn't last long and we get back on the highway.

Not as much a direct reply to you TheMagicM, more of a coffee fueled ramble

Quote:


I agree. I love my G5 with MorphOS. Best damn money I've spent on a computer in a long time. Moving to X86 will put MorphOS into territory covered by other "free" OS's like SkyOS for example.

> "free" OS's like SkyOS

Hasn't SkyOS been dead for years?

https://morph.zone/modules/newbb_plus/viewtopic.php?forum=3&topic_id=11342&start=74

Quote:

I'm not sure about that cheaper. Can it get much cheaper where we are now? :) Ok, for new computers maybe, but used and as fast as new systems are bargain currently. In any case, remember that it's been said, that the "NG" will be some fixed hardware still even on x86. You can't expect that any machine would magically work then. Probably some newer x86 Macs, which might not be that cheap still.

Quote:

MorphOS on PowerUp is 3.10 as well.

We just did not update as we wanted to show the system running and not spent all day to fix a broken update installation.

Quote:

No, this line of thinking needs to stop. The MorphOS Team has stated repeatedly it will certainly NOT be Mac X86 hardware. It makes no sense to target Mac.

> Probably some newer x86 Macs

"When MorphOS gets ported to AMD64, we will not be supporting Macs. AMD64 Macs have all the wrong hardware for that to make any sense."
https://morph.zone/modules/newbb_plus/viewtopic.php?topic_id=11137&forum=11&start=6

Blog about Neuss: https://morphosuser.wordpress.com/2015/10/13/amiga30-at-neuss-and-commodore-fan-club-japan/

It's not indepth in any way but enjoy

@ Yasu: top read! Thanks for this.

Quote:

yea, but gets my point across.

Quote:
I thought I remembered Frank mentioning that he was in contact with Deron about finishing a working MorphOS version 5.x.x.x of Pagestream, but that has all been kept very hush-hush for the time it has taken for it to get to this point.

Good news indeed, as far as I am concerned, and probably for many, many other Amiga users who have migrated to MorphOS, and still use Pagestream. It was a great program then, and hopefully will be again.

I still use Pagestream v4.1.5.6 Pro a lot on MorphOS under 68k emulation with Trance, but a native MorphOS version 5.x.x.x of Pagestream, with all the bugs that were so prevalent on the Windows, and Amiga releases will be a real PLUS for MorphOS.

Thanks a lot Frank, and Deron, for persisting with re-invigorating this software back into life, after such a lot of inactivity.

I now am really a great deal more optimistic it will actually see the 'light-of-day'.

> a native MorphOS version 5.x.x.x of Pagestream, with all the bugs that were so
> prevalent on the Windows, and Amiga releases will be a real PLUS for MorphOS.

;-)

Oh so it is happening. Niiice! Any screenshots?

Yes !Pagestream.
That's a program I will buy very usefull.

I appreciate Yasu's report, and I really know how it is like when you are at a show with your own gear, I am just surprised that nobody else was able to give us a more comprehensive report so far... When I met Frank and Mark in the past I had the chance to talk quite a lot, and made some (I think) nice reports, and now... there were a dozen or so of MorphOS developers, things were shown (like PageStream 5) and mentioned, and people argue more about new slow and expensive motherboards announcements that are completely MorphOS unrelated...
Actually, I would be more interested to know about the newer gfx board support mentioned here and there (new models? 2D and 3D acceleration? Overlay?) and other improvement in the OS we can expect in the foreseeable future, and I am pretty sure, from past experience, that the team members if asked would have gladly spilled some beans. ;)

Kind regards,
Andrea

[ Edited by guruman 15.10.2015 - 01:06 ]

@gurumam

Yeah, I wish that I did a better job myself.

Quote:
Just shows: If you want something to get done right, you have got to do it yourself

Quote:
Even worse: Unreleased hardware that has not even been formally announced yet

Quote:

Even worse yet, people being upset at discussion of hardware demonstrated by a commercial entity at a computer show!

BTW: to those who remember the PegasosPPC shirt, I was happy to collect almost all signatures from the devs team at the show as I have never seen so many of them in one place before. Just ignore the bad quality of my camera, please.

EDIT: the picture upload here is broken. I attached the picture with correct extension, type and file size but got the reply:

"Error: 1: /var/www/morph.zone/modules/newbb_plus/cache/attachments/ does not exist or is not writable.


If the page does not automatically reload, please click here"

So I uploaded it to: http://www.directupload.net/file/d/4141/lzif8frt_jpg.htm