CPU temperature
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Doffo
    Posts: 507 from 2010/10/14
    From: Nevada
    I believe that was the correct version for the G5.
    -=-=-=-
    YUUUP!
  • »25.08.13 - 07:27
    Profile Visit Website
  • Paladin of the Pegasos
    Paladin of the Pegasos
    Intuition
    Posts: 1110 from 2013/5/24
    From: Nederland
    Quote:

    Doffo wrote:
    I believe that was the correct version for the G5.


    Downloaderising as we speak, but the torrent speed is terrible so it'll probably take a few days to complete at this rate.

    Will let you know what happens once I've run the tests on the G5.
    1.67GHz 15" PowerBook G4, 1GB RAM, 128MB Radeon 9700M Pro, 64GB SSD, MorphOS 3.15

    2.7GHz DP G5, 4GB RAM, 512MB Radeon X1950 Pro, 500GB SSHD, MorphOS 3.9
  • »25.08.13 - 08:26
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Doffo
    Posts: 507 from 2010/10/14
    From: Nevada
    @Intuition

    Sounds good. Thanks! :)
    -=-=-=-
    YUUUP!
  • »26.08.13 - 00:22
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Jambalah
    Posts: 820 from 2008/3/30
    From: Roma, Italy
    Well, I dismounted the cpu unit and replaced cpu 1 (the one below assuming G5 stands vertically) since ASD diagnostic showed an error checking AD 7417 AD1 sensor. Assembled cpu unit, reseated and power on. After the chimes sound G5 booted MorphOS and I immediately noticed the difference: low temperature (started from 66 C degrees to 82) and quiet fans. I booted the ASD cd and checked for thermal calibration wich reporting an error message explaining that wrong values were found and reccomending to perform calibration. Did it and both cpu passed. Reboot and MorphOS runs ok with temperature between 80.9 and 81.1 and fans really quiet. I'm really satisfied! Let's check how it will go next days.
    @Intuition:
    Sorry to read your post only now but if you should encounter any problem downloading 2.5.8 let me know if I coul help in any way.
    Pegasos II 1 ghz
    Powermac G4 Quicksilver with Sonnet Encore 1.8 ghz
    Powermac G4 MDD single 1.25 ghz, silenced for ears health...
    Powermac G5 dual 2.7 ghz I'll be back...
    Powermac G5 dual 2.0 ghz
    Powerbook G4 1.67 ghz 17
  • »26.08.13 - 19:09
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    Intuition
    Posts: 1110 from 2013/5/24
    From: Nederland
    Quote:

    Jambalah wrote:
    Well, I dismounted the cpu unit and replaced cpu 1 (the one below assuming G5 stands vertically) since ASD diagnostic showed an error checking AD 7417 AD1 sensor. Assembled cpu unit, reseated and power on. After the chimes sound G5 booted MorphOS and I immediately noticed the difference: low temperature (started from 66 C degrees to 82) and quiet fans. I booted the ASD cd and checked for thermal calibration wich reporting an error message explaining that wrong values were found and reccomending to perform calibration. Did it and both cpu passed. Reboot and MorphOS runs ok with temperature between 80.9 and 81.1 and fans really quiet. I'm really satisfied! Let's check how it will go next days.
    @Intuition:
    Sorry to read your post only now but if you should encounter any problem downloading 2.5.8 let me know if I coul help in any way.


    Thanks, the torrent is coming down steadily so i'll just have to be patient. :)

    I haven't got the money to register MorphOS for my G5 at the moment after spending a lot of money upgrading and registering my PowerBook so the 30 minute time out pisses me of and causes me to not bother using it at the moment.

    Once I've registered it will be anothe story as I'll use it as my main development machine as the PB feels a tad slow when compiling C as I've got used to lighning fast Intel hardware over the years.
    1.67GHz 15" PowerBook G4, 1GB RAM, 128MB Radeon 9700M Pro, 64GB SSD, MorphOS 3.15

    2.7GHz DP G5, 4GB RAM, 512MB Radeon X1950 Pro, 500GB SSHD, MorphOS 3.9
  • »26.08.13 - 19:41
    Profile
  • Butterfly
    Butterfly
    Lord76
    Posts: 63 from 2014/8/31
    From: A1k.org -=Lord=-
    Hello i have now a Power Mac with 2.7 ghz, he run at 82-86 Celsius on Morphos and 50-84 C on MAC OSX.
    Who can i download this Service CD ASD 2.5.8?

    greetings
    Powerbook G4 A1138
    Vampire V4 Standalone
    Amiga1200 with V1200
    A2000 with with V500+
  • »08.03.15 - 22:44
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    BSzili
    Posts: 559 from 2012/6/8
    From: Hungary
    The ASD won't help you, MorphOS doesn't support power saving on G5s.
    This is just like television, only you can see much further.
  • »09.03.15 - 10:02
    Profile Visit Website
  • Butterfly
    Butterfly
    Lord76
    Posts: 63 from 2014/8/31
    From: A1k.org -=Lord=-
    Quote:

    BSzili schrieb:
    The ASD won't help you, MorphOS doesn't support power saving on G5s.


    ah okay thank you, but my Temperatures are to high or not? I mean 86C is to much or not?

    greetings
    Powerbook G4 A1138
    Vampire V4 Standalone
    Amiga1200 with V1200
    A2000 with with V500+
  • »09.03.15 - 14:41
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    BSzili
    Posts: 559 from 2012/6/8
    From: Hungary
    It is certainly high, but it's still within the limits.
    This is just like television, only you can see much further.
  • »09.03.15 - 15:07
    Profile Visit Website
  • Jim
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Jim
    Posts: 4977 from 2009/1/28
    From: Delaware, USA
    wrong thread, sorry

    Jim

    [ Edited by Jim 09.04.2017 - 07:37 ]
    "Never attribute to malice what can more readily explained by incompetence"
  • »09.04.17 - 12:33
    Profile