Printing with Pagestream in MOS1.4 possible?
  • Caterpillar
    Caterpillar
    Posts: 35 from 2003/6/11
    hi
    has anyone managed to print something with pagestream 4.1 and mos 1.4??
    i can get wordworth and turboprints graphicpublisher to print, but pagestream refuses.
    any other impressions or hints here?

    (i use an epson stylus photo 750 via usbparallel.device)

    kind regards
  • »25.08.03 - 21:43
    Profile
  • Caterpillar
    Caterpillar
    Posts: 26 from 2003/4/21
    From: Berlin, Allemagne
    I don't have a copy of PageStream myself but, as far as I can
    remember, there is a system printer driver and drivers for several
    printers that access the par port directly.
    Since you have an usb printer, it might not be possible to use the par
    drivers for it, but if you have an old par printer, you could check
    wether it works with system and/or parallel drivers.
    If one works, it is not the main app's fault, and a patch for the
    system printer shouldn't be hard to do. Maybe you could contact the
    programmers directly. I'm sure they'll help you if you sign a contract
    saying that you'll buy the next version ;)

    To add, my copy of Art Effect avoids any printing by crashing first
    :(
  • »25.08.03 - 23:58
    Profile
  • JKD
  • Order of the Butterfly
    Order of the Butterfly
    JKD
    Posts: 456 from 2003/4/4
    From: South of heaven
    I have seen posts from people that it is possible.

    ....one way would be to install Ghotscript correctly and print to PS: device.

    (Ghostscript was delivered with Turboprint for this very purpose and is in fact open source...)

    I will try to print and report back later when I get home..since I have Pagestream 4.1 :-)

    Cheers,

    Steve
  • »26.08.03 - 00:19
    Profile
  • JKD
  • Order of the Butterfly
    Order of the Butterfly
    JKD
    Posts: 456 from 2003/4/4
    From: South of heaven
    Okay.

    1. No luck at all printing to a Preferences Printer..the printer is
    detected and settings OK but I get sheets ejected and no output.

    2. Installing Ghostscript (5.1 available from Ireesoft homepage) or
    6.5 I got from somewhere allows you to print directly to the PS:
    device like the original Turboprint did (obviously with the PS device
    mount in Devs: and gs-handler in L:)

    Does it print correctly? Well I had some mixed experiments with
    Text...but this could be the limitations of GS for all I know...since
    I never tried it on AmigaOS

    My printer....EpsonStylus860 on usbparallel.device.

    Cheers,

    Steve
  • »26.08.03 - 07:31
    Profile
  • Caterpillar
    Caterpillar
    Posts: 35 from 2003/6/11
    thanks for your reply. i used ghostscript for printing with pagestream on amiga, too. it worked perfectly, but slowly :( no problems with text whatsoever.

    an inital attempt on mos1.4 failed here. i will try harder, though. . .
  • »30.08.03 - 22:33
    Profile