X5000: Booting MorphOS with RamDebug
  • Butterfly
    Butterfly
    Primax
    Posts: 83 from 2021/7/2
    Obviously on (my) AmigaOne X5000 serial debug output is set as default.
    Because: If I run LogTool and try to test debug output, nothing happens.

    So, I have read the lines "What boot arguments are there?" in the FAQ, but frankly spoken this did not help me.

    My question: What is the command line for booting MorphOS with Ram Debug output.

    I tried:
    'boot ide:0 boot.img rd'
    response: 'boot - boot default, i.g., run 'bootcmd''

    The only way I get MorphOS booting is:
    'bootmorphos'

    Any help is welcome.
    Thanks!
    AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon X1650 / AmigaOS 4.1 Final Edition / MorphOS 3.17
    Amiga1200 / Blizzard 1230 IV / 128 MB RAM / AmigaOS 3.9
  • »23.12.21 - 07:33
    Profile Visit Website
  • Butterfly
    Butterfly
    Primax
    Posts: 83 from 2021/7/2
    Hmmm, yes I already got this hint from roschmyr...thanks!

    X5000>printenv morphosargs
    ## Error: "morphosargs" not defined

    ??

    X5000> setenv morphosargs ramdebug
    X5000> saveenv
    SAving Environment to MMC...
    Writing to MMC(0)... done

    So, I will see if this has something changed...

    Yes, the last one worked. Thanks Jochen! :)
    Now I finally can send my bug report to Jacek... ;)
    AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon X1650 / AmigaOS 4.1 Final Edition / MorphOS 3.17
    Amiga1200 / Blizzard 1230 IV / 128 MB RAM / AmigaOS 3.9
  • »23.12.21 - 16:26
    Profile Visit Website