Can't install Morphos 3.11 (or 3.10) on sam460ex
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    Hello all,

    I just tried to install Morphos 3.11 on my sam460ex, but it fails just like 3.10.

    Just like I described in this thread https://morph.zone/modules/newbb_plus/viewtopic.php?topic_id=12265&forum=11#135797

    I get the same error messages.

    I've read at obligement that it would be solved in the next release.
    But the problem remains with 3.11.

    So I registered morphos for my sam, but I can't install anything else than morphos 3.9

    I don't know what to do anymore. Somebody from the morphos team PLEASE HELP ME.
  • »06.07.18 - 12:24
    Profile
  • MorphOS Developer
    cyfm
    Posts: 388 from 2003/4/11
    From: Germany
    So you don't even manage to get past the bootloader or is there some problem with the Radeon card later on ? The mentioned thread is not really clear there except that it covers multiple issues with running MorphOS on Sam460ex.
  • »06.07.18 - 12:45
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    The bootloader gives some errors:
    - Failed to load cache block 0 from device 2
    - Failed to load partitions on device 2

    device 2 is my DVD/CDROM device.

    Then it says:
    Timeout, booting from ISO9660

    It then loads the boot.img, and then says "booting..."and stays there forever.

    My gfxcard is a radeon X1550.

    edit:here's a picture
    https://www.dropbox.com/s/xuu8evl71auslp8/20180709_151017.jpg?dl=0

    [ Edited by Mozzerfan 09.07.2018 - 15:17 ]
  • »06.07.18 - 13:35
    Profile
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    So FINALLY I got hold of a nullmodem cable.
    So here is the serial log:

    U-Boot 2015.a (May 16 2015 - 14:17:51)

    CPU: AMCC PowerPC 460EX Rev. B at 1150 MHz (PLB=287 OPB=143 EBC=143)
    No Security/Kasumi support
    Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
    Internal PCI arbiter enabled
    32 kB I-Cache 32 kB D-Cache
    Board: Sam460ex/cr, PCIe 4x + SATA-2
    I2C: ready
    DRAM: ddr2_boost enabled, level 3
    2 GiB (ECC not enabled, 575 MHz, CL4)
    PCI: Bus Dev VenId DevId Class Int
    00 04 1095 3114 0180 00
    00 06 126f 0501 0380 00
    PCIE1: successfully set as root-complex
    02 00 1002 719f 0300 ff
    Net: ppc_4xx_eth0
    FPGA: Revision 03 (2010-10-07)
    SM502: found
    PERMD2:not found
    VGA: 1
    VESA: OK
    SYS_ShowQuarkState:
    SYS_ShowQuarkState: Base 0x7ac000
    SYS_ShowQuarkState: QUARKBASEPTR 0x80=0x7ac000
    SYS_ShowQuarkState: TaskTableSemaphore
    : Semaphore 0x7ac540
    : Succ 0 Pred 0 ThreadNode Succ 0 Pred 0
    : Lock 0 QueueCount 0 NestCount 0
    : CallerAddress[] 0 0 0 0
    SYS_ShowQuarkState: SystemMemSemaphore
    : Semaphore 0x7ac3b0
    : Succ 0 Pred 0 ThreadNode Succ 0 Pred 0
    : Lock 0 QueueCount 0 NestCount 0
    : CallerAddress[] 0 0 0 0
    SYS_ShowQuarkState: DisableLock Lock 0x1 MSR 0x3000
    SYS_ShowQuarkState: InitTableLock Lock 0x0
    IntCount: IntID 0x0 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x8 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x9 SharedCount 0 IntCount 0x0
    IntCount: IntID 0xa SharedCount 0 IntCount 0x0
    IntCount: IntID 0xb SharedCount 0 IntCount 0x0
    IntCount: IntID 0xc SharedCount 0 IntCount 0x0
    IntCount: IntID 0xd SharedCount 0 IntCount 0x0
    IntCount: IntID 0xe SharedCount 0 IntCount 0x0
    IntCount: IntID 0xf SharedCount 0 IntCount 0x0
    IntCount: IntID 0x10 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x11 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x12 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x13 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x14 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x15 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x16 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x17 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x18 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x19 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x1f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x20 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x21 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x22 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x23 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x24 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x25 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x26 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x27 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x28 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x29 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x2f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x30 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x31 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x32 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x33 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x34 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x35 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x36 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x37 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x38 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x39 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x3f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x40 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x41 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x42 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x43 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x44 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x45 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x46 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x47 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x48 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x49 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x4f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x50 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x51 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x52 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x53 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x54 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x55 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x56 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x57 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x58 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x59 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x5f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x60 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x61 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x62 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x63 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x64 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x65 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x66 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x67 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x68 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x69 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x6f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x70 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x71 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x72 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x73 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x74 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x75 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x76 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x77 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x78 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x79 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7a SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7b SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7c SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7d SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7e SharedCount 0 IntCount 0x0
    IntCount: IntID 0x7f SharedCount 0 IntCount 0x0
    IntCount: IntID 0x80 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x81 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x82 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x83 SharedCount 0 IntCount 0x0
    IntCount: IntID 0x84 SharedCount 0 IntCount 0x0
    SYS_ShowIntThreads:
    ********************************************************
    SYS_ShowIntThreads: done
    SYS_ShowWaitThreads:
    ********************************************************
    SYS_ShowWaitThreads: done
    SYS_ShowExceptionThreads:
    ********************************************************
    SYS_ShowExceptionThreads: done
    SYS_ShowReadyThreads:
    ********************************************************
    SYS_ShowReadyThreads: done
  • »09.07.18 - 12:17
    Profile
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    Hi all,

    So I can't install 3.12 either. Same problems as with 3.10 and 3.11.
    I tried to send a bug report, but it crashes when I press send.
    Can somebody from the morphos-team help me PLEASE?
  • »10.10.19 - 09:17
    Profile
  • MorphOS Developer
    jacadcaps
    Posts: 1884 from 2003/3/5
    From: Poland
    Any chance you're coming to Neuss for Amiga34?

    Looking at the log is a bit hard to say what's going on. If you can do that, try booting from a prompt with boot.img edebugflags=init - that'll hopefully show what's going on.
  • »10.10.19 - 09:38
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    Unfortunately I can't come to Neuss. I have mental issues, so big crowds get on my nerves.

    It's a bit of a silly question, but how exactly do I boot from a prompt ?
  • »10.10.19 - 09:55
    Profile
  • MorphOS Developer
    jacadcaps
    Posts: 1884 from 2003/3/5
    From: Poland
    No idea about booting, sorry. I've never used this computer myself.

    As for why it doesn't boot - try unplugging the Radeon and/or the Sii sata controller. One of those may be causing it to fail.
  • »10.10.19 - 11:33
    Profile Visit Website
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    From what you pasted previously, it looks like something is at least missing from the middle of the log.

    When does this crash happen? Previous posts indicate that you're able to boot the installation media at least, right?

    If you are able to boot to desktop before it crashes, then please give an as detailed as possible description of what you do before it crashes.

    Please generate a new serial log. If whatever program you're using to receive the log supports logging/saving the input to a file, please use that option to make sure everything gets saved, then please upload the saved file to something like pastebin.com and give us a link to what you've uploaded. Alternatively you can email the log to me, see my signature for the email address.
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »10.10.19 - 11:38
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    Hi Bigfoot,

    I can't boot from the installation media.
    The boot img is loaded and then nothing...

    https://www.dropbox.com/s/xuu8evl71auslp8/20180709_151017.jpg?dl=0

    I generated a new serial log. https://www.dropbox.com/s/nqyvwmoshzk7nyv/teraterm.log?dl=0
  • »10.10.19 - 12:39
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    OK, if that really is the entire serial log, then we need to add some debug arguments to MorphOS to get more info.

    Now please bear with me, I'm doing this from memory and I don't have access to any hardware to test with myself currently, so it might need some adjustment to actually work.

    First get to the text console of U-Boot. You do that by pressing enter, escape or some other button during boot. There'll be text on the screen telling you which one it is.

    Once you're there, type the following command:

    Code:
    setenv morphosargs qdebugflags "init log" edebugflags "init log initresident pci" 


    You can then type "printenv" to make sure that the morphosargs variable was stored correctly. It should retain the double quotes at the exact places I wrote them.

    Then when that's done, and I'm slightly unsure about this one, I think you need to execute the boota command. If your computer boots as normal, then it was the right one :) The serial log created from this boot should have a lot more information to work with, so please upload that one.
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »10.10.19 - 13:13
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    Hi Bigfoot,

    edit : never mind

    [ Edited by Mozzerfan 10.10.2019 - 15:35 ]
  • »10.10.19 - 13:30
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    It's output via serial just like before, so whereever your serial terminal program stores it.
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »10.10.19 - 13:32
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    I generated a new log with debugging enabled.

    The output is the same as the previous log ??????????????????????????

    https://www.dropbox.com/s/ue3oxl926jo6h4p/teraterm2.log?dl=0
  • »10.10.19 - 14:20
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    Then there was a problem with the boot arguments or how the boot was initiated.

    So let's just make sure, you did the setenv command, then ran the boota command, and took the log from that without rebooting inbetween any of the steps?

    If so, then maybe let's try with a simpler argument string for now. Try this instead

    Code:
    setenv morphosargs edebugflags init
    boota


    And see if that generates a log with more info.
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »10.10.19 - 15:07
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    Nope ...

    https://www.dropbox.com/s/jkd2hiiesw15i4c/teraterm4.log?dl=0
  • »10.10.19 - 15:32
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    OK, next plan... I've prepared custom MorphOS 3.12 ISO and HD images that should have the required debug options enabled by default, so you just need to boot your preferred custom image the way you would boot MorphOS 3.12.

    I'll send the links to you in a private message.
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »11.10.19 - 06:35
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    I generated a new serial log with the new debug-CD.
    still the same ????????????
    https://www.dropbox.com/s/igonwvajqy6hf52/teraterm5.log?dl=0
    I really don't get it.
  • »11.10.19 - 06:59
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    That's probably my mistake, sorry about that!

    I've updated the images, same URLs as before. New MD5 sums are:

    a5805a994639061eead19f94dc855c21 .hdimg
    adea257ef0ce32c3648193e177d0960d .iso

    You can use those to verify that you've downloaded the updated image. So please redownload, check the MD5 sum and test again. Thanks!
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »11.10.19 - 08:04
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    I downloaded the new iso and verified the checksum.

    Generated a new serial log. Same problem.

    https://www.dropbox.com/s/ercnfnmjit2mos7/teraterm6.log?dl=0

    BTW the bootloader gives some error messages:
    Failed to load cache block 0 from device 2
    Failed to scan partitiuons on device 2

    What do these messages mean?
  • »11.10.19 - 08:44
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    OK, that's really weird. It's Amiga 34 this weekend, and I'll have lots of travelling right after, but if you have patience and you are willing to test some more images later, we'll get to the bottom of this and get it solved.

    Those messages means that U-Boot presented some storage device as being available, but attempting to read from it failed. It's likely something benign such as the MicroSD slot being empty, or an empty optical drive, or something to that effect. Your logs indicate that MorphOS did load and start to boot, so these messages are unrelated to whatever the problem on your system is.
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »11.10.19 - 14:09
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    OK Bigfoot. I will wait until you have some more time for this.
    Thank you for looking into this.
    Have fun at amiga34.

    [ Edited by Mozzerfan 11.10.2019 - 16:21 ]
  • »11.10.19 - 14:20
    Profile
  • MorphOS Developer
    bigfoot
    Posts: 326 from 2003/4/11
    I think this one has finally been resolved, and a fix will be included in MorphOS 3.13. If anyone else is having this same problem, please let me know!
    I rarely log in to MorphZone which means that I often miss private messages sent on here. If you wish to contact me, please email me at [username]@asgaard.morphos-team.net, where [username] is my username here on MorphZone.
  • »21.10.19 - 20:47
    Profile Visit Website
  • Cocoon
    Cocoon
    Mozzerfan
    Posts: 55 from 2016/10/5
    From: Leiden, The Ne...
    YES !!! It is indeed fixed.

    Thanks again Bigfoot. You really are a genius.
  • »22.10.19 - 07:34
    Profile