Do work the joystic xcsource under Morphos?
  • Order of the Butterfly
    Order of the Butterfly
    Templario
    Posts: 169 from 2012/4/28
    I have this doubt the joystick xcsource will runs under MorphOS?
    Fo example this:
    https://www.amazon.es/XCSOURCE%C2%AE-Joystick-codificador-Fighting-AC549/dp/B01M59KT4N
    To run MorphOS game and console emulators, MAME, etc.
    In theory this device is as simple as an old Amiga joystick.
    Amiga 500 with ROMs 1.3-2.05 and M-Tec AT 500 with hard disk and 4MB Ram.
    WinUAE + original OS 3.5&3.9
    Sam440ep 800 MHZ + OS 4.1 F.E.
    Sam460ex 1 GHz + OS 4.1 + Update 6. K.O.
    MacMini 1.5 GHz + MorphOS 3.9
    PowerBook G4 1.65 + MorphOS 3.9
  • »02.08.17 - 13:18
    Profile Visit Website
  • MorphOS Developer
    jacadcaps
    Posts: 1481 from 2003/3/5
    From: Canada
    Assuming it's a HID compliant joystick there is no reason for it not to work.
  • »02.08.17 - 18:10
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    Templario
    Posts: 169 from 2012/4/28
    Quote:

    jacadcaps escribió:
    Assuming it's a HID compliant joystick there is no reason for it not to work.

    Well, only I shall buy the components to make the joystick and test it under MorphOS.
    Amiga 500 with ROMs 1.3-2.05 and M-Tec AT 500 with hard disk and 4MB Ram.
    WinUAE + original OS 3.5&3.9
    Sam440ep 800 MHZ + OS 4.1 F.E.
    Sam460ex 1 GHz + OS 4.1 + Update 6. K.O.
    MacMini 1.5 GHz + MorphOS 3.9
    PowerBook G4 1.65 + MorphOS 3.9
  • »04.08.17 - 11:26
    Profile Visit Website
  • MorphOS Developer
    jacadcaps
    Posts: 1481 from 2003/3/5
    From: Canada
    Let me know if you have any problems setting it up...
  • »04.08.17 - 12:52
    Profile Visit Website