hi

im using miamidx and the internal network card in pegasos, and in miami panels, the rate and
traffic are off/not working...anyone have any clues ?
And when i query the via_rhinepci.device, miami
quits ?
via_rhinepci.device is 50.7

Hard to say ,coz your info is too basic. Sounds like
"My computer ain't working" , please help me. Forgive me to be straight but I cant help you with this info.
-------------------------------------------------------------
Mine is working with MiamiDx
regs
hgm

I've got 50.8

Hi Cato

Please send an email, maybe we can sort it out.

gunne@ggsdata.se

Have had some other costumers that also had similar problem.

I have problems with Miami + built in nwcard too.
I got miami and dialup working without much probs,
but with the rhine.device miami hangs forever looking for IP addresses, and takes the hole
MUI system with it.

I have a PhreeBoard (no april) and MOS 1.3.

Leif

To put long story short: via_rhine is piece of ####. Put in a Realtek card and be happy.

<via_rhine is piece of ####>
A lil off topic , but a Moderator should give his/her opinion moderated. It's just a thought ........
hgm

Can't. I battled with the broken driver for a day .. it really is just what I said. After installing Realtek card and drivers for it, everything's worked as it should.

Also, I have heard older versions works better than the new ones.

Hi hooligan,

Quote:

I've got 50.8

I've got 1.2 (checked with DirOpus)

Did I miss anything?

Spidey

50.5 works fine
hgm

Hello cartohagen,

The Via_Rhine...device of MOS1.3 isn't good.
On the FTP site you can download another one.

Further on you have to do the following (just once) after initialisation of the Via...device in MiamiDX:

- Go to Hardware
- Select your defined interface and click on Edit
- Click on the button SANA-II parameters ...
- Now you have to push the button Query device until you see the right Mac adress in the field Hardware adress (otherwise you'll see a bunch of zero's in this field)
- Click on Override

After this you don't have to worry anymore, atleast I don't!

Good luck,

Spidey

>The Via_Rhine...device of MOS1.3 isn't good.
>On the FTP site you can download another one.

ok..i'll check it out.

>- Go to Hardware
>- Select your defined interface and click on >Edit
>- Click on the button SANA-II parameters ...
>- Now you have to push the button Query device >until you see the right Mac adress in the field >Hardware adress (otherwise you'll see a bunch of >zero's in this field)
>- Click on Override

did all this also, when i push the query button
miamidx quits after it finds the mac address, the address is shown aprox. 2 secs, so i repeated query and wrote down numbers, query button again and wrote more numbers and entered them manually :)

internet and network are working fine, its just
bugs me about the miami panel not working..
i've seen other's miami panels working..

Hi

#

internet and network are working fine, its just
bugs me about the miami panel not working..
i've seen other's miami panels working..

-------

Choose Miami.mui.panel or gelbes.panel also works fine

/Gunne

Quote:

I don't see it on FTP beta 2, where do you fing it ?

Thanks.