CatComp for MorphOS, where?
  • Caterpillar
    Caterpillar
    ShInKurO
    Posts: 36 from 2008/5/30
  • »18.06.12 - 12:03
    Profile Visit Website
  • MorphOS Developer
    geit
    Posts: 927 from 2004/9/23
    Huh?

    SimpleCat for sure supports "\n\". I am using this all the time.

    If you encounter a problem, then feel free to send in an example which does not work, and I will fix it.

    Geit



    [ Edited by geit 18.06.2012 - 13:24 ]
  • »18.06.12 - 12:20
    Profile
  • MorphOS Developer
    itix
    Posts: 1516 from 2003/2/24
    From: Finland
    There is CatComp in MorphOS SDK. IIRC it is (almost?) compatible to CatComp from Commodore.
    1 + 1 = 3 with very large values of 1
  • »18.06.12 - 15:41
    Profile
  • Caterpillar
    Caterpillar
    ShInKurO
    Posts: 36 from 2008/5/30
    itix nope, it isn't into mos sdk downloaded with grunch. Btw geit has resolved my problems with simplecat: a space before end line which wasn't warn by os4 catcomp in 2010 ;)

    10x to all

    [ Edited by ShInKurO 18.06.2012 - 19:45 ]
  • »18.06.12 - 18:41
    Profile Visit Website
  • MorphOS Developer
    geit
    Posts: 927 from 2004/9/23
    In fact SimpleCat warns about a suspicios \<space> at line end and since there is no \ at line end, it continues parsing with the next line as label, which causes the fatal errors afterwards.

    Geit
  • »18.06.12 - 18:51
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    Jeckel
    Posts: 133 from 2007/3/11
    I have an issue with SimpleCat on MorphOS 3.0 (fresh install on PowerBook): add/remove labels buttons are not displayed (I have a blank space instead).

    Any clue?
  • »19.06.12 - 08:56
    Profile
  • Visitor
  • Thanks for sharing...
  • »17.09.14 - 10:46