Send me your log

[INF][HELIOS-helios_process_bm : 338] ioerr = 1New OHCI bus generation: 248, Local NodeId: 1
[INF][OHCI-ohci_UpdateTopologyMapping : 390] New topo: 0x24466848
[INF][OHCI-ohci_UpdateTopologyMapping : 425] [unit 0] Node 0: 2 port(s), 0 connected children
[INF][OHCI-ohci_UpdateTopologyMapping : 425] [unit 0] Node 1: 2 port(s), 1 connected children
[INF][OHCI-topo_set_max_speed : 213] Node 1: max speed=2
[INF][OHCI-topo_set_max_speed : 213] Node 0: max speed=2
[INF][HELIOS-Helios_UpdateDevice :1328] Update dev 0x23392308 (0->1) @ tgen=13558, Rom-up-flags: IQ
[INF][HELIOS-Helios_UpdateDevice :1328] Update dev 0x20e90c38 (1->0) @ tgen=13558, Rom-up-flags: Q
[INF][OHCI-ohci_UpdateTopologyMapping : 551] [unit 0] Topo #13559 OK: NodeCnt=2, GapCount=63, local=1, IRM=1, root=1
[INF][HELIOS-helios_process_bm : 316] Checking for BM...
[INF][HELIOS-helios_process_bm : 338] ioerr = 0
RptMsg: [BusManager] Send PHY cfg <GapCount=63>
New OHCI bus generation: 249, Local NodeId: 0
[INF][OHCI-ohci_UpdateTopologyMapping : 390] New topo: 0x2416f850
[INF][OHCI-ohci_UpdateTopologyMapping : 425] [unit 0] Node 0: 2 port(s), 0 connected children
[INF][OHCI-ohci_UpdateTopologyMapping : 425] [unit 0] Node 1: 2 port(s), 1 connected children
[INF][OHCI-topo_set_max_speed : 213] Node 0: max speed=2
[INF][OHCI-topo_set_max_speed : 213] Node 1: max speed=2
[INF][HELIOS-Helios_UpdateDevice :1328] Update dev 0x23392308 (1->0) @ tgen=13559, Rom-up-flags: IQ
[INF][HELIOS-Helios_UpdateDevice :1328] Update dev 0x20e90c38 (0->1) @ tgen=13559, Rom-up-flags: Q
[INF][OHCI-ohci_UpdateTopologyMapping : 551] [unit 0] Topo #13560 OK: NodeCnt=2, GapCount=63, local=0, IRM=0, root=1
[INF][HELIOS-helios_process_bm : 316] Checking for BM...

[INF][HELIOS-helios_process_bm : 338] ioerr = 1
RptMsg: [BusManager] Send PHY cfg <GapCount=63>
New OHCI bus generation: 108, Local NodeId: 1
[INF][OHCI-ohci_UpdateTopologyMapping : 390] New topo: 0x23887890
[INF][OHCI-ohci_UpdateTopologyMapping : 425] [unit 0] Node 0: 2 port(s), 0 connected children
[INF][OHCI-ohci_UpdateTopologyMapping : 425] [unit 0] Node 1: 2 port(s), 1 connected children
[INF][OHCI-topo_set_max_speed : 213] Node 1: max speed=2
[INF][OHCI-topo_set_max_speed : 213] Node 0: max speed=2
[INF][HELIOS-Helios_UpdateDevice :1328] Update dev 0x23392308 (0->1) @ tgen=14698, Rom-up-flags: IQ
[INF][HELIOS-Helios_UpdateDevice :1328] Update dev 0x20e90c38 (1->0) @ tgen=14698, Rom-up-flags: Q
[INF][OHCI-ohci_UpdateTopologyMapping : 551] [unit 0] Topo #14699 OK: NodeCnt=2, GapCount=63, local=1, IRM=1, root=1
[INF][HELIOS-helios_process_bm : 316] Checking for BM...
[INF][HELIOS-helios_process_bm : 338] ioerr = 0
RptMsg: [BusManager] Send PHY cfg <GapCount=63>
OHCI1394 Monitor port not found.

-- Opening serial device failed --