miamidx and built-in network port
  • Order of the Butterfly
    Order of the Butterfly
    catohagen
    Posts: 297 from 2003/5/20
    hi

    im using miamidx and the internal network card in pegasos, and in miami panels, the rate and
    traffic are off/not working...anyone have any clues ?
    And when i query the via_rhinepci.device, miami
    quits ?
    via_rhinepci.device is 50.7
  • »24.07.03 - 00:35
    Profile
  • Butterfly
    Butterfly
    Posts: 90 from 2003/4/13
    Hard to say ,coz your info is too basic. Sounds like
    "My computer ain't working" , please help me. Forgive me to be straight but I cant help you with this info.
    -------------------------------------------------------------
    Mine is working with MiamiDx:-)
    regs
    hgm
  • »24.07.03 - 08:04
    Profile
  • Moderator
    hooligan
    Posts: 1948 from 2003/2/23
    From: Lahti, Finland
    I've got 50.8
    www.mikseri.net/hooligan <- Free music
  • »24.07.03 - 10:44
    Profile Visit Website
  • Moderator
    gunne
    Posts: 441 from 2003/2/25
    From: Sweden
    Hi Cato

    Please send an email, maybe we can sort it out.

    gunne@ggsdata.se

    Have had some other costumers that also had similar problem.
    Best wishes, Gunne
  • »24.07.03 - 12:59
    Profile Visit Website
  • Just looking around
    Posts: 8 from 2003/2/24
    I have problems with Miami + built in nwcard too.
    I got miami and dialup working without much probs,
    but with the rhine.device miami hangs forever looking for IP addresses, and takes the hole
    MUI system with it.

    I have a PhreeBoard (no april) and MOS 1.3.

    Leif
  • »24.07.03 - 15:33
    Profile
  • Moderator
    hooligan
    Posts: 1948 from 2003/2/23
    From: Lahti, Finland
    To put long story short: via_rhine is piece of ####. Put in a Realtek card and be happy.
    www.mikseri.net/hooligan <- Free music
  • »24.07.03 - 15:54
    Profile Visit Website
  • Butterfly
    Butterfly
    Posts: 90 from 2003/4/13
    <via_rhine is piece of ####>
    A lil off topic , but a Moderator should give his/her opinion moderated. It's just a thought ........:-)
    hgm
  • »24.07.03 - 16:31
    Profile
  • Moderator
    hooligan
    Posts: 1948 from 2003/2/23
    From: Lahti, Finland
    Can't. I battled with the broken driver for a day .. it really is just what I said. After installing Realtek card and drivers for it, everything's worked as it should.

    Also, I have heard older versions works better than the new ones.
    www.mikseri.net/hooligan <- Free music
  • »24.07.03 - 17:24
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Spidey
    Posts: 568 from 2003/2/24
    From: Netherlands
    Hi hooligan,

    Quote:

    I've got 50.8

    I've got 1.2 :-D(checked with DirOpus)

    Did I miss anything? :-)

    Spidey
  • »24.07.03 - 17:26
    Profile Visit Website
  • Butterfly
    Butterfly
    Posts: 90 from 2003/4/13
    50.5 works fine:-)
    hgm :-)
  • »24.07.03 - 17:37
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Spidey
    Posts: 568 from 2003/2/24
    From: Netherlands
    Hello cartohagen,

    The Via_Rhine...device of MOS1.3 isn't good.
    On the FTP site you can download another one.

    Further on you have to do the following (just once) after initialisation of the Via...device in MiamiDX:

    - Go to Hardware
    - Select your defined interface and click on Edit
    - Click on the button SANA-II parameters ...
    - Now you have to push the button Query device until you see the right Mac adress in the field Hardware adress (otherwise you'll see a bunch of zero's in this field)
    - Click on Override

    After this you don't have to worry anymore, atleast I don't! :-D

    Good luck,

    Spidey
  • »24.07.03 - 17:37
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    catohagen
    Posts: 297 from 2003/5/20
    >The Via_Rhine...device of MOS1.3 isn't good.
    >On the FTP site you can download another one.

    ok..i'll check it out.

    >- Go to Hardware
    >- Select your defined interface and click on >Edit
    >- Click on the button SANA-II parameters ...
    >- Now you have to push the button Query device >until you see the right Mac adress in the field >Hardware adress (otherwise you'll see a bunch of >zero's in this field)
    >- Click on Override

    did all this also, when i push the query button
    miamidx quits after it finds the mac address, the address is shown aprox. 2 secs, so i repeated query and wrote down numbers, query button again and wrote more numbers and entered them manually :)

    internet and network are working fine, its just
    bugs me about the miami panel not working..
    i've seen other's miami panels working..
  • »24.07.03 - 17:56
    Profile
  • Moderator
    gunne
    Posts: 441 from 2003/2/25
    From: Sweden
    Hi

    #

    internet and network are working fine, its just
    bugs me about the miami panel not working..
    i've seen other's miami panels working..

    -------

    Choose Miami.mui.panel or gelbes.panel also works fine

    /Gunne
    Best wishes, Gunne
  • »24.07.03 - 19:33
    Profile Visit Website
  • Just looking around
    Posts: 9 from 2003/5/19
    Quote:


    Spidey wrote:
    Hello cartohagen,

    The Via_Rhine...device of MOS1.3 isn't good.
    On the FTP site you can download another one.




    I don't see it on FTP beta 2, where do you fing it ?

    Thanks.
  • »24.07.03 - 20:21
    Profile