MorphZone

Using an Audigy SE soundcard in the Peg with Morphos

magnetic

# 1
Yokemate of Keyboards

Posts: 2129 from 2003/3/1

From: Los Angeles

Hey guys
Is it possible to use an Audigy SE soundcard in the Peg with Morphos and ahi?

tia
magnetic
Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
»07.08.06 - 06:55

imax

# 2
Cocoon

Posts: 41 from 2004/9/20

From: Russia

>Is it possible to use an Audigy SE soundcard in the Peg with Morphos and ahi?

No. AHI v6 dont support sound chip CAO106 , see second hand EMU10K sound card (Audigy1 & Audigy2 will work).
»09.08.06 - 07:55

magnetic

# 3
Yokemate of Keyboards

Posts: 2129 from 2003/3/1

From: Los Angeles

imax

Thanks alot. :( I was hoping it was supported as its the only Low Profile Audigy, and I have a half height case now..

magnetic
Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
»09.08.06 - 21:10

imax

# 4
Cocoon

Posts: 41 from 2004/9/20

From: Russia

Quote:

magnetic wrote:
Thanks alot. :( I was hoping it was supported as its the only Low Profile Audigy, and I have a half height case now..

1. Replace in new normal case (Inwin, GMC>=30, Foxconn)
2. Kick Martin Bloom
3. Buy the saw
»11.08.06 - 14:24

magnetic

# 5
Yokemate of Keyboards

Posts: 2129 from 2003/3/1

From: Los Angeles

imax

1. I just took my peg out of a "normal" case to go half height and small form factor which is what peg is meant to be to me..

2. well Martin does a great job for free so not much I can say ...

3. I have a saw, but most audio cards are full height so a "saw" won't do much good.

magnetic
Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
»14.08.06 - 18:58