Forum Index
 » 
User Forums
 » 
Applications
Amithlon TV Card - Installation help
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    TrevorDick
    Posts: 130 from 2005/10/12
    From: Wellington
    My new Pegasos II came installed with a LifeView Flyvideo TV card and Amihlon 2.2 software and drivers. However when I try to configure the card I get several error messages when I try either an auto or manual install. If I select the LifeView Flyvideo card manually I can tune in a TV channel and the picture is OK but the sound is highly distorted and is drowned out by a loud hiss.

    I tried re-istalling the Amithlon software using the installer from OS3.9 as I was informed that the native MorphOS installer is buggy? However the response was exactly the same after de-installing and re-installing the Amithlon software. :-? I apologise if this topic has been covered before.
  • »16.12.05 - 02:45
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    Bladerunner
    Posts: 418 from 2004/2/19
    Unfortunately I can`t help you on the the topic, but
    Quote:

    as I was informed that the native MorphOS installer is buggy?


    There is no native Installer for MorphOS, and given the animosity some people have against installers, I doubt there ever will be one ;) Which is to bad, because *actually* I like Installer, although it need a major overhaul.
  • »16.12.05 - 07:49
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    TrevorDick
    Posts: 130 from 2005/10/12
    From: Wellington
    Quote:


    Bladerunner wrote:

    There is no native Installer for MorphOS

    oops! Obviously misunderstood :-?

    Can anyone else help with my TV card installtion problem?

    TrevorDick
  • »16.12.05 - 11:36
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    Why you didn't try Visionary? You can find it here: http://grex.amigaworld.de/index.php?lang=en&page=14
    You need V.15 or V0.22 and the SkinsTV package.
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »16.12.05 - 12:03
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    TrevorDick
    Posts: 130 from 2005/10/12
    From: Wellington
    Quote:

    Why you didn't try Visionary?

    Thanks I'll download it and give it a try.

    TrevorDick
  • »16.12.05 - 19:08
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    TrevorDick
    Posts: 130 from 2005/10/12
    From: Wellington
    OK downloaded and installed Visionary. Vey clear interface but once the channels were tuned in it gave me very similar results to the Amithlon software. Reasonable picture quality with a very lound hiss and TV sound barely audible. Any ideas?

    TrevorDick :-?
  • »16.12.05 - 20:21
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    How is the Soundoutput of your TV-Card connected to the Peg? Maybe the cabel is faulty or the Card it self is it.
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »17.12.05 - 12:42
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    TrevorDick
    Posts: 130 from 2005/10/12
    From: Wellington
    Quote:

    How is the Soundoutput of your TV-Card connected to the Peg? Maybe the cabel is faulty or the Card it self is it

    I connected the speakers directly to the output on the video card.

    TrevorDick

    [ Edited by TrevorDick on 2005/12/18 6:00 ]
  • »17.12.05 - 22:58
    Profile
  • Butterfly
    Butterfly
    Mi-Go
    Posts: 95 from 2003/9/18
    Since you're talking about it, I'll "abuse" this thread asking a question about visionary, hope you don't mind... ;-)

    I have a Pinnacle PCTV (which works great on linux) but can't manage to tune the channels, are there some guides around or is it so easy there is no need for a manual (i.e. my card isn't supported)?

    or, simply, how did you tune the channels?
  • »18.12.05 - 02:51
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    Go to the Prefs in Visionary and autoscan the broadcast channels.
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »18.12.05 - 15:48
    Profile
  • Butterfly
    Butterfly
    Mi-Go
    Posts: 95 from 2003/9/18
    Quote:


    ThePlayer wrote:
    Go to the Prefs in Visionary and autoscan the broadcast channels.


    ...so it's not supported... :-(

    well, actually nothing happens, it starts scanning, the flickering lines change, but in the end no channel is found. I tried to enable the debug option (both tooltype and cli) but I got no output.
  • »18.12.05 - 16:57
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    Then your card isn't supported. Or the revision of the Card is the wrong one.
    Had this problem with my WinTV.
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »18.12.05 - 21:44
    Profile