Quote:

thanks :)

yet another small update:
http://brain.umcs.lublin.pl/~rzookol/download/scandal_beta.lha
i fixed ruler refreshing and some other bugs/memleaks

THX! Really cool programm!

Thanx for the update...but the link is dead (for now).

my server is dead, i changed to another but the data has not been copied yet

zukow
Thanks for the work! Very nice. I hope you get your server back up, I was following this thread for the first time and getting 404'd all over the place!

Quote:

Hi zukow

I have connected my Epson Perfection 1200S (SCSI) to the host adapter SCSI Symbios 875 in Pegasos2 G4@1000.

Installed Scandal 1.4 (08/08/2010), the driver "EpsonUSB.device_scsi" version 1.5 (22/07/2010) renamed in "EpsonUSB.device" and put it in DEVS:
, then I have in S: the file "epson.conf" with inside the line "scsi EPSON".

In Scandal preferences I have driver "boot:Devs/EpsonUSB.device" device "symbios.device", unit "3".

well... I ran "Scan" in Scandal and I see the Scanner Epson Perfection 1200 works correctly, It goes to the end of A4 size and then Scandal stops working "freeze".

I copy and paste the log debug (ID SCSI is 3 as you see in the log) thanks

Driver_Init:
Driver_Init: process std sata boards
Driver_Init: process custom sata boards
Driver_Init: process custom ide boards...done
symbios.device: Type 9 <SYM 53C875> found
PCI ATA/ATAPI Driver@3: PIO Mode 4
PCI ATA/ATAPI Driver@3: UDMA Mode 2
PCI ATA/ATAPI Driver@0: PIO Mode 4
PCI ATA/ATAPI Driver@0: UDMA Mode 5
ide.device@0: ATA-HD WDC WD800JB-00JJ <DIRECT_ACCESS>
ide.device@0: Mount <bt>
ide.device@0: Partition <bt> DosType 0x444f5303
ide.device@0: Mount <DH0>
ide.device@0: Partition <DH0> DosType 0x444f5301
ide.device@0: Mount <DH1>
ide.device@0: Partition <DH1> DosType 0x53465300 BootPri 0
ide.device@0: Mount <DH2>
ide.device@0: Partition <DH2> DosType 0x53465300
ide.device@0: Mount <DH3>
ide.device@0: Partition <DH3> DosType 0x53465300
ide.device@3: HL-DT-ST DVDRAM GSA-4167B <CDROM>
symbios.device@3: EPSON Perfection1200 <PROCESSOR>
RADEON: Found DDC from DVI port
UserLibOpen : $VER: muimaster.library 20.6848 (02.06.10) ? 2008 Stefan Stuntz, PPC, MorphOS, DEBUG
Brynhildr [Aboutbox.mcc 20.17 (02.06.10)]
symbios.device boot:Devs/EpsonUSB.device
opening port
creating struct ScannerIO
struct ScannerIO created
opening devices
open driver IO
OpenDriver IO
sanei_config_open: using file `s:epson.conf'
Scanner: Epson
Model: Perfection1200
Options: 12
Driver: 1.5
Paper size x: 215.899994, y: 297.179993
ID: 1
Value type: 3
Value unit: 0
Constraint unit: 3
Scanmode parsing: ON
ID: 2
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 3
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 4
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 5
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 6
Value type: 1
Value unit: 4
Constraint unit: 2
ID: 7
Value type: 3
Value unit: 0
Constraint unit: 3
ID: 8
Value type: 1
Value unit: 0
Constraint unit: 1
Brightness: ON
ID: 10
Value type: 2
Value unit: 0
Constraint unit: 1
Gamma: ON
ID: 13
Value type: 1
Value unit: 0
Constraint unit: 1
ID: 18
Value type: 3
Value unit: 0
Constraint unit: 3
Source: ON
ID: 19
Value type: 0
Value unit: 0
Constraint unit: 0
Preview: ON
dpi done
mode done
gamma done
preview done
W: 1240, H:1730 BPL: 1240
XRes: 0.002289 YRes: 0.002289 Mode: 1 Depth: 8
Preparing reading 0



[ Edited by Divinity on 2010/9/8 0:08 ]

EDIT:

after many many and many minutes the scan is "completed" and I see these :
http://www.logicabs.it/amiga/scandal.jpg
http://www.logicabs.it/amiga/scandal2.jpg

and these are the settings in Scandal used:
http://www.logicabs.it/amiga/scandal3.jpg
http://www.logicabs.it/amiga/scandal4.jpg


and the log debug file add these lines:

Preparing reading 0
MAIN: DeleteClasses
myFreeClass : 0x2aa3dcc4_Group.mui objectcount =1
Close all start
Close all: end
10 secs
Abort IO 10s done
waitport 10s done
Reading done 0, len=1240
error during scanning: 0
scanning done
MAIN: DeleteClasses
myFreeClass : 0x2aa40574_Group.mui objectcount =1
Close all start
Close all: end


[ Edited by Divinity on 2010/9/8 0:25 ]

Could You try with tis driver:
http://aminet.net/driver/other/BetaScanEpson.lha

Quote:

Hi zukow
There is the same problem also with this driver 68k ... nothing change, this is the details:

It starts the scan perfectly (I see working the scanner), It ends its working but then nothing in Scandal for many many many many minutes (scandal "freeze"), then after many minutes Scandal works again but no scan image only this situation http://www.logicabs.it/amiga/scandal.jpg or a requester to save the image (when I select save and not scan).

Tell me if you need other infos, logs ..etc.. or other to try, thanks a lot
regards

@zukow
here a screenshot with driver betascan 68k, with the same problem
http://www.logicabs.it/amiga/scandal5.jpg

here the log debug:


ABox 1.26 (17.11.2007) ? 1999-2007 by Ralph Schmidt, Emmanuel Lesueur, Teemu Suikki, Harry Sintonen
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
*********************************************************************
Driver_Init:
Driver_Init: process std sata boards
Driver_Init: process custom sata boards
Driver_Init: process custom ide boards...done
symbios.device: Type 9 <SYM 53C875> found
PCI ATA/ATAPI Driver@3: PIO Mode 4
PCI ATA/ATAPI Driver@3: UDMA Mode 2
PCI ATA/ATAPI Driver@0: PIO Mode 4
PCI ATA/ATAPI Driver@0: UDMA Mode 5
ide.device@0: ATA-HD WDC WD800JB-00JJ <DIRECT_ACCESS>
ide.device@0: Mount <bt>
ide.device@0: Partition <bt> DosType 0x444f5303
ide.device@0: Mount <DH0>
ide.device@0: Partition <DH0> DosType 0x444f5301
ide.device@0: Mount <DH1>
ide.device@0: Partition <DH1> DosType 0x53465300 BootPri 0
ide.device@0: Mount <DH2>
ide.device@0: Partition <DH2> DosType 0x53465300
ide.device@0: Mount <DH3>
ide.device@0: Partition <DH3> DosType 0x53465300
ide.device@3: HL-DT-ST DVDRAM GSA-4167B <CDROM>
symbios.device@0: EPSON Perfection1200 <PROCESSOR>
RADEON: Found DDC from DVI port
UserLibOpen : $VER: muimaster.library 20.6848 (02.06.10) ? 2008 Stefan Stuntz, PPC, MorphOS, DEBUG
Brynhildr [Aboutbox.mcc 20.17 (02.06.10)]
symbios.device boot:Devs/Epson.device
opening port
creating struct ScannerIO
struct ScannerIO created
opening devices
Scanner: Epson
Model: Perfection120
Options: 8
Driver: 0.3
Paper size x: 215.899994, y: 297.179993
ID: 1
Value type: 3
Value unit: 0
Constraint unit: 3
Scanmode parsing: ON
ID: 2
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 3
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 4
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 5
Value type: 2
Value unit: 3
Constraint unit: 1
ID: 6
Value type: 1
Value unit: 4
Constraint unit: 1
ID: 7
Value type: 3
Value unit: 0
Constraint unit: 3
ID: 8
Value type: 3
Value unit: 0
Constraint unit: 3
Brightness: ON
symbios.device boot:Devs/Epson.device
dpi done
mode done
gamma done
preview done
W: 392, H:289 BPL: 1176
XRes: 0.001144 YRes: 0.001144 Mode: 5 Depth: 24
Preparing reading 0
10 secs
Abort IO 10s done
waitport 10s done
Reading done 0, len=1176
error during scanning: 0
scanning done

hmm, Scandal takes info from scanner and it's working ok but scanning itself isn't working. This garbage in window is due to showing memory with random content. When i come back home i'll prepare version with full debug.

Could You test epsonusb.device from this archive:
http://thylacine.boing.net/Thylacine1.3.lha

@zukow

hi,

Ok I'll try with the package with full debug, thanks.

The same problem also with epsonusb.device version 0.50 in Thylacine1.3.lha
here the screenshot http://www.logicabs.it/amiga/scandal6.jpg



[ Edited by Divinity on 2010/9/8 13:08 ]

ok, Could You try with this version:

http://liza.umcs.lublin.pl/~mzukowski/EpsonUSB.device

here the log file http://www.logicabs.it/amiga/scandal_log.txt

(changed the ID from 3 to 0)

[ Edited by Divinity on 2010/9/8 20:50 ]

afrer many many many ... minutes I have this http://www.logicabs.it/amiga/scandal7.jpg
and the debug log is completed so:

sane_read: begin
sane_read: begin scan1
CacheClearU: PC 0x2a513066 --> AmiTradeCenter Hunk 0 Offset 0x1016
10 secs
Abort IO 10s done
waitport 10s done
Reading done 0, len=280
error during scanning: 0
scanning done
CacheClearU: PC 0x2c10b536 --> AmiTradeCenter Hunk 0 Offset 0x1016


[ Edited by Divinity on 2010/9/8 21:26 ]

http://liza.umcs.lublin.pl/~mzukowski/Epson2.device
http://liza.umcs.lublin.pl/~mzukowski/epson2.conf

it's totally different backend, it may work (works with my 1640S)

[ Edited by zukow on 2010/9/8 23:51 ]

[ Edited by zukow on 2010/9/8 23:51 ]

the same problem, here log http://www.logicabs.it/amiga/scandal_log2.txt

i've bought Epson with ADF recenlty so i start coding ADF support for scandal
ADF support isn't finished but i discovered that Scanner Source handling have some stupid bug (it takes value from wrong object). So with this version TPU and ADF should work (better).

http://brain.umcs.lublin.pl/~rzookol/download/scandal_beta.lha

http://brain.umcs.lublin.pl/~rzookol/download/scandal_beta.lha

another beta with fixed brightness handling for epson scanners

and
http://brain.umcs.lublin.pl/~rzookol/download/epson2.lha

quite stable version of new epson backend (it's different than EpsonUSB..),
testing is welcome :) i have some problems with usb with it but scsi works ok

copy conf file to s:

i uploaded newer version of epson2.device, same link, should work without problems with usb scanners, just leave device string in prefs blank (and uncomment/comment proper # in prefs file)

i've made a wiki page with SCANdal documentation on Morphos Library:
http://library.morph.zone/index.php/Scanning_with_SCANdal

Nice MorphZone Library documentation zukow! I can't wait to test my USB scanner with the 4 port USB2.0 card in my G4 PowerMac tower later this week. I am still not sure my scanner is supported yet (Canon CanoScan N1220U), is there an updated list of supported scanners that can be added to the documentation in the MZ Library (or is it already there and I missed it when I scanned (pun intended) through it quickly a minute ago)?

Edit: I see that I need to look at the BetaScan drivers list, which if I remember from last time I looked months ago, was not a simple list to look through, though I don't know why a simpler list is not available. Maybe one is now, I'll have to look. A simple list could be copied and pasted into your Library doc with a heading of "Supported Scanners".

[ Edited by amigadave on 2010/11/3 7:29 ]

i've just uploaded SCANdal 1.4 stable to Aminet. Should be available today or tomorrow. This is stable relese of 1.4 branch with fixes and finetunes.
I've expanded docs on Morphzone library also:
http://library.morph.zone/Scanning_with_SCANdal


screenshots from new version:
http://brain.umcs.lublin.pl/~rzookol/pics/scandal22.png
http://brain.umcs.lublin.pl/~rzookol/pics/scandal23.png

[ Edited by zukow on 2010/11/21 20:34 ]

Great work, i currently dont have any scanner.. But need to get one.