Pagestream/DrawStudio + photo manipulation with layers?
  • Cocoon
    Cocoon
    Posts: 45 from 2013/8/19
    I used to have Pagestream 3 and DrawStudio (bought legally) in the late 90's/early 00's.
    Is there a way I can legally obtain these again (or even upgrade to Pagestream 5 for MorphOS without breaking the bank)?
    there seems to be no way to contact grasshopper/Pagestream on their website

    is there anything else out there that does similar and is as good on 68k/MorphOS?

    Also, is there any photo manipulation software that uses layers?

    thanks in advance for any help
  • »22.08.13 - 14:11
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12132 from 2003/5/22
    From: Germany
    > there seems to be no way to contact grasshopper/Pagestream on their website

    Both http://www.pagestream.org and http://www.grasshopperllc.com have an email address in the page footer.

    > is there any photo manipulation software that uses layers?

    Out of the software titles you were told about in that other thread, I think at least Photogenics, ArtEffect and ImageFX use layers. TVPaint should work with layers, too.
  • »22.08.13 - 14:44
    Profile
  • Cocoon
    Cocoon
    Posts: 45 from 2013/8/19
    Andreas_Wolf,
    Quote:



    Cheers, wasn't sure if I should keep updating the same thread

    The email address in the footer bounced back, address doesn't exist

    ImageFX looks like the best, and has a MorphOS version, however, the web site is very old and out of date, plus the contact page goes to a 3rd party company and doesn't work, not sure if I can trust them to spend that much money when the site hasn't even been touched in 5 years, is there another way to buy it that anyone knows of?
  • »22.08.13 - 15:13
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12132 from 2003/5/22
    From: Germany
    > The email address in the footer bounced back, address doesn't exist

    Does that happen with both email addresses?

    > the web site is [...] out of date

    How do you know? Isn't it more likely the site is up to date and there simply hasn't anything more recent happened to report on the site? :-)

    > the contact page goes to a 3rd party company and doesn't work

    Yes, that's unfortunate and shouldn't be the case. You may be able to contact Kermit Woodall via his new company:

    http://kermitwoodall.com/contact-us/

    > the site hasn't even been touched in 5 years

    Most recent entry is from October 2011, i.e. less than 2 years ago:

    http://www.novadesign.com/2011/10/imagefx-45-manual-available-and-more.html
  • »22.08.13 - 16:04
    Profile
  • Cocoon
    Cocoon
    Posts: 45 from 2013/8/19
    I was looking at the copyright, 2008, being a web developer, I can tell it's old and out of date
  • »22.08.13 - 16:11
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12132 from 2003/5/22
    From: Germany
    > I was looking at the copyright, 2008

    Seems he just forgot to update the copyright date. Fact is, as you can see from the link I gave, that there was an update to the website in 2011.

    > I can tell it's [...] out of date

    Yes, the copyright date is out of date obviously. It should read "2011" at least. I don't see how the main content of the site is out of date, though, as I can't remember any more recent NovaDesign news not reflected on the site.
  • »22.08.13 - 16:40
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    sabbate
    Posts: 110 from 2013/7/7
    From: Palermo - Italia
    Quote:

    mmace wrote:
    Andreas_Wolf,
    Quote:



    Cheers, wasn't sure if I should keep updating the same thread

    The email address in the footer bounced back, address doesn't exist

    ImageFX looks like the best, and has a MorphOS version, however, the web site is very old and out of date, plus the contact page goes to a 3rd party company and doesn't work, not sure if I can trust them to spend that much money when the site hasn't even been touched in 5 years, is there another way to buy it that anyone knows of?


    imagefx lite on os4depot is free
  • »22.08.13 - 16:54
    Profile
  • Just looking around
    Posts: 2 from 2013/8/22
    Actually we're still around but doing other things. However you can buy ImageFX still from my old partner Bob Fisher.

    My email account bounced due to a host change that bolluxed up our A name record for the Nova Design domain.

    You can reach Bob at bob (at) lostandfoundstudio (dot) com

    Kermit Woodall
    http://kermitwoodall.com
  • »22.08.13 - 17:21
    Profile Visit Website
  • Just looking around
    Posts: 2 from 2013/8/22
    By the way - thanks for alerting me to how out-of-date I'd let the site get. I've fixed everything now.

    Kermit Woodall
    http://kermitwoodall.com
  • »22.08.13 - 17:33
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    connor
    Posts: 570 from 2007/7/29
    Quote:


    I used to have Pagestream 3 and DrawStudio (bought legally) in the late 90's/early 00's.


    Did you sell the programs? Otherwise just run them. Both work on MOS. Both need a huge overhaul but at least they can be used with limitations.

    Quote:


    Kermit Woodall
    http://kermitwoodall.com



    Wow! An ImageFX author is still around after so many years! Is there any chance to get an updated version that more fits into todays MOS/Amiga environment?
  • »22.08.13 - 19:11
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    discreetfx
    Posts: 392 from 2003/7/26
    From: Chicago, IL
    Kermit is awesome, I e-mailed him right away this morning when I saw questions come up about ImageFX. He immediately logged onto here to help. Great customer service.
    DiscreetFX
    Making your
    Digital Films
    More Effective!
  • »23.08.13 - 08:12
    Profile Visit Website
  • Cocoon
    Cocoon
    Posts: 45 from 2013/8/19
    kwoodall,
    Quote:



    Thank you for responding, I actually found Bob on Youtube yesterday and messaged him through there before I saw you'd responded on here.
    connor,
    Quote:

    Did you sell the programs? Otherwise just run them. Both work on MOS
    No, I have them but I have no way of using the floppies
  • »23.08.13 - 08:36
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12132 from 2003/5/22
    From: Germany
    > Kermit is awesome [...]. He immediately logged onto here to help. Great customer service.

    Indeed. He went out of his way and not only logged into MorphZone but even registered a new account. I remember that he already was a member of this site years ago. Seems he had deleted his old account.

    http://web.archive.org/web/20081112174028/https://morph.zone/userinfo.php?uid=522
  • »23.08.13 - 08:59
    Profile