At every boot I have the activity indicator of debug 'on'. I do not know what/who is responsible, sdl 2 or tinygl latest releases. So here is the log that I obtain.

20.070| 128 bytes read
20.070| block#0 bytesum 0x0
20.070| 0x00: 00 ff ff ff ff ff ff 00 26 cd 11 66 26 0b 00 00 .ÿÿÿÿÿÿ..Í.f....
20.070| 0x10: 10 19 01 03 80 3c 22 78 2a 2f a5 a5 54 50 9e 27 .......x....TP..
20.070| 0x20: 10 50 54 33 08 00 71 00 81 40 81 80 a9 40 b3 00 .PT3..q.........
20.070| 0x30: 95 00 d1 c0 01 01 02 3a 80 18 71 38 2d 40 58 2c ..ÑÀ......q8..X.
20.071| 0x40: 45 00 56 50 21 00 00 1e 00 00 00 ff 00 31 31 32 E.VP.......ÿ.112
20.071| 0x50: 38 31 35 31 36 30 32 38 35 34 00 00 00 fd 00 37 8151602854...ý.7
20.071| 0x60: 4c 1e 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc L.S............ü
20.071| 0x70: 00 50 4c 58 32 37 38 33 48 0a 20 20 20 20 00 61 .PLX2783H......a
20.071|
20.071| ID manufacturer Name = 'IVM'
20.071| ProductCode = 0x6611
20.071| Serial Number 260b0000
20.071| Week of Manufacture 16
20.071| Year of Manufacture 2015
20.071| EDID Structure Version 1.3
20.071|
20.071| Basic Display Parameters and Features
20.071| checkDDCdata: Video input: Digital signal
20.071| Max. Horizontal Image Size 60 cm
20.071| Max. Vertical Image Size 34 cm
20.071| Display Transfer Characteristic (Gamma): 2.2
20.071|
20.071| Feature Support (0x2a)
20.071| Supports Active Off/Very Low Power
20.071| RGB color display
20.071| Preferred timing mode is indicated in the first detailed timing block
20.071| (Note: Use of preferred timing mode is required by EDID structure version 1.3 and higher
20.071|
20.071| Phosphor or filter chromacity
20.071| red_x 0.6445 red_y 0.3301
20.071| green_x 0.3154 green_y 0.6201
20.071| blue_x 0.1543 blue_y 0.06445
20.071| white_x 0.2354 white_y 0.1338
20.071|
20.071| Established Timings
20.072| 640 x 480 @ 60Hz (IBM, VGA)
20.072| 640 x 480 @ 67Hz (Apple, MacII)
20.072| 800 x 600 @ 56Hz (VESA)
20.072| 800 x 600 @ 60Hz (VESA)
20.072| 1024 x 768 @ 60Hz (VESA)
20.072|
20.072| Standard timing identification #1
20.072| code 0x7100 (HActive 1152 Pixels VActive 720 Lines RefreshRate 60Hz Aspect 16:10)
20.072| Standard timing identification #2
20.072| code 0x8140 (HActive 1280 Pixels VActive 960 Lines RefreshRate 60Hz Aspect 4:3)
20.072| Standard timing identification #3
20.072| code 0x8180 (HActive 1280 Pixels VActive 1024 Lines RefreshRate 60Hz Aspect 5:4)
20.072| Standard timing identification #4
20.072| code 0xa940 (HActive 1600 Pixels VActive 1200 Lines RefreshRate 60Hz Aspect 4:3)
20.072| Standard timing identification #5
20.072| code 0xb300 (HActive 1680 Pixels VActive 1050 Lines RefreshRate 60Hz Aspect 16:10)
20.072| Standard timing identification #6
20.072| code 0x9500 (HActive 1440 Pixels VActive 900 Lines RefreshRate 60Hz Aspect 16:10)
20.072| Standard timing identification #7
20.072| code 0xd1c0 (HActive 1920 Pixels VActive 1080 Lines RefreshRate 60Hz Aspect 16:9)
20.072|
20.072| monitor descriptor 2 type 0xff
20.072| Monitor S/N: 1128151602854
20.072| monitor descriptor 3 type 0xfd
20.072| Monitor range limits
20.072| min vfreq 55 max vfreq 76
20.073| min hfreq 30 max hfreq 83
20.073| max pixclk 170MHz (0)
20.073|
20.073| monitor descriptor 4 type 0xfc
20.073| Monitor name: PLX2783H

I forgot to say that I obtain this debug log only with my macmini. On my amigaone x5000 I do not obtain any debug log.

Brumiga

[ Edité par Brumiga 29.09.2024 - 18:33 ]