TinyGL: FBO, Shaders and futur improvements
  • Moderator
    Kronos
    Posts: 2287 from 2003/2/24
    These drivers are not needed for booting, so anything that is listed for 2D in the 3.18 FAQ will work.
  • »01.07.24 - 04:15
    Profile
  • Caterpillar
    Caterpillar
    Posts: 27 from 2018/6/9
    So, the reason I asked the question is because the card in question (HD8490) is listed in this thread (previous page), but isn't listed at all on the Morph 3.18 hardware FAQ page. I don't think it really matters TBH. When I looked up the hardware it seems that an 8490 isn't really much better than the HD5450 that I do have. Unfortunately that one refuses to work in the 2nd slot.
  • »01.07.24 - 20:04
    Profile
  • Moderator
    Kronos
    Posts: 2287 from 2003/2/24
    Quote:

    MartinW wrote:
    So, the reason I asked the question is because the card in question (HD8490) is listed in this thread (previous page), but isn't listed at all on the Morph 3.18 hardware FAQ page. I don't think it really matters TBH. When I looked up the hardware it seems that an 8490 isn't really much better than the HD5450 that I do have. Unfortunately that one refuses to work in the 2nd slot.


    https://www.morphos-team.net/hardware

    Code:


    AMD Radeon HD3830, HD3850, HD3870
    AMD Radeon HD4350, HD4550, HD4570
    AMD Radeon HD4670
    AMD Radeon HD4750, HD4770
    AMD Radeon HD4810, HD4830, HD4850, HD4870
    AMD Radeon HD4860, HD4890
    ATI Rage128 Pro
    With 2D graphics acceleration, no overlay:
    AMD Radeon HD5450, HD6350, HD7350, HD8350, R5 210
    AMD Radeon HD5550, HD5570, HD5610, HD5670, FirePro 3D V3800, FirePro 3D V4800
    AMD Radeon HD5750, HD5770, HD6750, HD6770
    AMD Radeon HD5830, HD5850, HD5870, HD5870 Eyefinity Edition
    AMD Radeon HD6450, HD7450, HD7470, HD8450, HD8470, HD8490, R5 220, R5 230, R5 235, R5 235X
    AMD Radeon HD6570, HD6670, HD7510, HD7570, HD7670
    AMD Radeon HD6790, HD6850, HD6870


    So it is listed and it should give you a basic working system on a clean 3.18 install.

    But sure it was an entry level card released 11 years ago, so I wouldn't ecpect much.
  • »01.07.24 - 20:42
    Profile
  • Caterpillar
    Caterpillar
    Posts: 27 from 2018/6/9
    Sorry, don't know how I missed that. I did look, honest!
  • »01.07.24 - 22:58
    Profile