Home
Forums
Library
Links
Bounties
Login Block
Nickname
Password
Lost Password?
Don't have an account?
Register now!
Search
Advanced Search
Forum Index
»
User Forums
»
Hardware
»
MorphOS for PowerUP
Help with debug options
Framiga
# 1
Order of the Butterfly
Posts: 363 from 2003/7/11
From: Milan-Italy
Hi all
i need a help from someone using MOS for PowerUP and MUI4 with YAM2.5dev (or others MUI apps but IBrowse)
I get this MUI4 debug output in Sashimi (serial out), every time i iconify/de-iconify and quit YAM2.5dev:
Sashimi installed ([Ctrl]+C or "Break 5" to remove)
0000000000000000MUIP_AskMinMax: bogus: min=-1/15 def=-1/15 max=10060/15 for obj=0x0988b2f0(0)(Group.mui)In Arrivo
0000000000000000MUIP_AskMinMax: bogus: min=-1/19 def=-1/19 max=10000/19 for obj=0x0987f3e8(0)(Group.mui)
00000000000000000MUI_LayoutObj: obj=0x09881498(0)(Image.mui)0x0 10166/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000000MUI_LayoutObj: obj=0x0989aba0(0)(Image.mui)0x0 10761/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000MUIP_ShowClipped: obj=0x09881498(0)(Image.mui)0x0 <- no previous MUIM_Layout
00000000000000MUIP_ShowClipped: obj=0x0989aba0(0)(Image.mui)0x0 <- no previous MUIM_Layout
00000000000000000MUI_LayoutObj: obj=0x09881498(0)(Image.mui)0x0 10166/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000MUIP_ShowClipped: obj=0x09881498(0)(Image.mui)0x0 <- no previous MUIM_Layout
00000000000000000MUI_LayoutObj: obj=0x0989aba0(0)(Image.mui)0x0 10761/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000MUIP_ShowClipped: obj=0x0989aba0(0)(Image.mui)0x0 <- no previous MUIM_Layout
00000000000000000MUI_LayoutObj: obj=0x09881498(0)(Image.mui)0x0 10166/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000000MUI_LayoutObj: obj=0x09881498(0)(Image.mui)0x0 10166/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000000MUI_LayoutObj: obj=0x09881498(0)(Image.mui)0x0 10166/10367 8x8 failed completely (min=0x0 max=0x0)
00000000000000000MUI_LayoutObj: obj=0x09881498(0)(Image.mui)0x0 10166/10367 8x8 failed completely (min=0x0 max=0x0)
can you confirm this? and if NOT, what are your debug options in SYS:Startup-Sequence?
My goal would be to redirect all this otput in ramdebug, because WITHOUT sashimi running, YAM takes 4-5 seconds to iconify/deiconify/quitting.
All these on MOS for PowerUP only.
Thanks.
»
05.08.07
-
14:49