-
-
Just looking around
Posts: 3 from 2006/8/16
Hi All - Helo Needed please
I downloads the iso from the correct place. Burnt using nero. Copied the files across to a blank partition. None of the protection bits were sety on either the cd or the files copied across.
Anyway solved this by using protect #? +RWED ALL on the files
Now when I boot (the partition is bootable and is not the first booting partition) using the eraly startup just get a black screen on both the amiga output and the bvision output.
I have changed the reset levels, but anything apart from 1 gives my a please insert env requester.
I have not changed the startup-sequence apart from the rest levels, so I am using the fake kickstart.
The machine has 3.1 roms, should i be booting with a 3.1 kickstart file.
My config is
A1200 rev 1A mobo. 3.1 roms.
Blizzard 040/25 & 603e 175 no scsi, Bvision attached - from memory blizzard flashed with latest firmaware - maprom set to off
64MB ram
Z4 Busboard , nothing connected to zorro slots
Eytech keyboard adapter
2 gig IDE HDD attached to first channel of powerflyer gold/fast ata , 52x cdrom attached to second channel
Everyhting is fine under AOS3.1 and 3.9
Thanks in advance for any tips , help :)
-
»16.08.06 - 13:56