Hello

I'am tring to ger mos working on my a1200 with blizzard ppc + vbvision, but I've got a problem : the system start, make the reboot, then reload, but nothin comme on the screen ! I think this is a graphic card isue, because I don't become any signal on the monitor.

Now the question : the precedent owner of my blizzard ppc has got a grex. I don't have a grex but I put the bvision instead. On os 3.9 I have to use the g-rex permedia driver to display something. Could it be the problem with mos ? In other words, does I have to reflash my blizzard ppc to get mos working '

Thanks for your help

@guibrush

I had the same problem with A4000T. After changing from the internal scsi-controller to the cybppc.device everything worked like it should.

I think morphos_pup doesn't work with the C= scsi.device even it is mentioned it should so.

Markus

Connect a Disk to the Blizzard scsiport and try again.

I was born in Basel and I live in Binningen BL, but my origin is Gamsen VS

Markus

@guibrush

My Bppc is revision 0 but MOS works perfect..and no grex here only Bvison..and 96MB

Do you have more than 130 Mb ?? ( 128 Mb of Fast + 2 Mb of Chip) ?
If yes, then remove to get at least 64 mb and at at the max 128 mb of Fast.
Add ramdebug 1 (not sure, check it please) just before the long start line.

"I have tried to flash the blizzard. I have to reinstall cgx 4 to get my bvision working on os 3.9 (as expected), but I still become nothing on the screen with mos."

but . . . have you installed MOS on a separate partition?

Try sfsfilesystem instead of fastfilesystem. ffs doesn't saupport longer filenames used on the morphosPowerUp CD

@CLS2086

You don't have problems with truncted filenames? I could not copy the fonts without beeing truncted.



[ Edited by Markus_Bieler on 2005/11/10 5:38 ]