Hi,

It is possible to use the RTL8029pci.device V1.5 original for the Grex in MOS ??, I have tried and does not work for me.

Miami get online but veeeery slow pings response and no traffic

Thanks.

It should work if not try the OpenPCI drivers!

Yes, the 8029 drivers works with Grex but I advise you no to put your card on the 1st slot of your Grex, the connexion becomes very slow. The 8139 driver doesn't work for me, nonetheless.

Hey thx for your help.

Ka1-L can you tell my if you own a 1200Grex OR an
A4000D one.

I believe the problems in the slots of GREX is related
of 1200 models

This show pci scan in my WB3.9:
9/0.Sistema:> pciscan
cybpci.library 2.2
------------------------------------------------------
BoardObject 0x80133F4
Bus 0 <CyberstormPPC GRex PCI> Slot 3 Function 0
Vendor 0x121A <3dfx Interactive Inc> Device 0x5 <Voodoo3>
-> All Voodoo3 chips, 3000
Class 0x3 <Display Controller>
SubClass 0x0 <PC Compatible>
ProgInterface 0x0 <VGA>
Command 0x3
-> I/O Access
-> Memory Access
Base 0: Address 0x80000000 Size 0x2000000
Base 1: Address 0x82000000 Size 0x2000000
Base 2: Address 0xFFFA1000 Size 0x100
------------------------------------------------------
BoardObject 0x80134E4
Bus 0 <CyberstormPPC GRex PCI> Slot 4 Function 0
Vendor 0x10EC <Realtek Semiconductor> Device 0x8029 <RTL8029>
-> NE2000 compatible Ethernet
Class 0x2 <Network Controller>
SubClass 0x0 <Ethernet>
ProgInterface 0x0 <>
Command 0x3
-> I/O Access
-> Memory Access
Base 0: Address 0xFFFA1100 Size 0x20

The RTL8029 is in the slot 4 this is in the bottom of
Grex near A4000PCB

Ciao.

Read you

Hi, check you riser card about the resistor implemantation problem !
it's explicated in the Yahoo! Group GREX.
A 8139S should be better for you !