MorphZone

Ram for the Blizzard ppc

Zylesea

# 1
Yokemate of Keyboards

Posts: 2057 from 2003/6/4

Tonight I am going to put MOS to my old 1200 (Blizzard 603e/200 + BVision). Unfortunately I have only 64 MB ram. Should run, but well, not much more I guess...

So I checked ebay already for ps2 modules. But something deeply hidden in my brains said "attention, the Blizzard was quite as ram picky as the pegasos1 is, was'nt it?".

Well, long words, short message: Any rules available to check if a very type of ram works *b4* purchasing it?

What about mixing modules, single/double sided, maximum size of a module, etc...
--
http://via.bckrs.de

Whenever you're sad just remember the world is 4.543 billion years old and you somehow managed to exist at the same time as David Bowie.
...and Matthias , my friend - RIP
»26.08.05 - 09:59

jacadcaps

# 2
MorphOS Developer

Posts: 3108 from 2003/3/5

From: Canada

www.efunzine.com has some BlizzardPPC compatible modules for sure. See http://www.efunzine.com/efnz.php?a=pro&id=68 (yeah, the site is in polish but you can safely contact them in english, or look for ravek on freenode).
»26.08.05 - 10:19

DJBase

# 3
Priest of the Order of the Butterfly

Posts: 745 from 2003/4/6

From: Germany

I had not such problems as with Peg1 Modules. But someone on ebay sells 128 modules (~ 30 Euro) for Blizzard cards that works with BPPC as well.
Mac mini, PowerPC G4 1.5 GHz, ATI Radeon 9200 64 MB, 1 GB RAM, 80 GB HDD, MorphOS 3.18
PowerBook, PowerPC G4 1.67 GHz, ATI Radeon 9700 128 MB, 2 GB RAM, 250 GB mSATA HDD, MorphOS 3.18
»26.08.05 - 10:30

CLS2086

# 4
Order of the Butterfly

Posts: 168 from 2005/8/25

From: West of PARIS

that depend of the rev of your BPPC.
A low cost solution is to get 128Mb 36bits ECC simm for HP it is about 10-15$ us.
But, depending of your card, you won't be able to use 2 of them togheter !!
But you can mix : 128 +32 or 64 without problems here.
Keep the Faith !
VG 5000/A1000/500/500+/600/2000/1200PPC-GREX/1200PPC-ATEO/1200+1230-IVFPUSCSI/CD32/Pegasos 1 April1 G3/Pegasos 2 G4/ Ahtlon/K6-3/various funny machines too
Maybe one day a G4 AmigaONE when they will be debugged and without April...
»26.08.05 - 10:31

zhulien

# 5
Acolyte of the Butterfly

Posts: 118 from 2004/8/21

I have MorphOS 1.4.5 running on my A1200 with 64mb RAM. Seems a bit flakey, but I am wondering if it's due to overheating (lots of PPC usage?) or lack of RAM. It is a standard A1200 casing with internal 160Mhz604e+50Mhz 68060, internal Ultra ATA controller, internal 3.5" HDD (no floppy though)... runs 100% with AmigaOS 3.5, boots about 50% of the time with MorphOS...

I reckon it really is overheating :(

[ Edited by zhulien on 2005/8/28 2:58 ]
»27.08.05 - 15:18

warface

# 6
Priest of the Order of the Butterfly

Posts: 653 from 2003/2/24

From: Hungary

Quote:

zhulien wrote:
I have MorphOS 1.4.5 running on my A1200 with 64mb RAM. Seems a bit flakey, but I am wondering if it's due to overheating (lots of PPC usage?) or lack of RAM. It is a standard A1200 casing with internal 160Mhz604e+50Mhz 68060, internal Ultra ATA controller, internal 3.5" HDD (no floppy though)... runs 100% with AmigaOS 3.5, boots about 50% of the time with MorphOS...

I reckon it really is overheating :(

[ Edited by zhulien on 2005/8/28 2:58 ]

Afaik there was no 604e for A1200 models. The 160 MHz 603e on the other hand is the low-end blizzardppc model. Have you tried Bladerunner's settings to speed it up?
»27.08.05 - 17:39

zhulien

# 7
Acolyte of the Butterfly

Posts: 118 from 2004/8/21

sorry, that was a typo

oddly I get a pause of about 1 second for every icon, menu items etc that I click on... I figured it is possible it is due to memory flushing or something like that, gfx speed is quite ok itself, unless there is a lot of overhead in preparing the graphics before displaying them.

what are bladerunners settings?

[ Edited by zhulien on 2005/8/28 10:28 ]
»27.08.05 - 23:16