We are a hardware company, not a software one. We add AmigaOS support
for our products.

As regards other operation systems, we are always opento supply them
with developer docs for our hardware products.

The CGX author (one of the main persons in the MOS team) was the first
developer outside Elbox who received the complete MEDIATOR developer
docs. In 2000 we supplied him also with the developer's MEDIATOR
busboard, an Amiga 1200 computer in E/BOX tower with turbo card,
FastATA controller, a hard disk and other add-ons like e.g. a Voodoo3
PCI graphic card.
The developer docs for the FastATA controllers were sent a few years
ago to another member of the MOS team, who asked us for them.

As far as MEDIATOR support is concerned, if only AmigaOS emulation in
this MOS version were done well enough, so that the Picasso 96 system
can work, you should be able to use our Voodoo drivers (and drivers
for other PCI cards) for MEDIATOR.

As BVision is the basic graphic card natively supported in A1200 by
the current MOS version (AGA is not supported), the easiest way to
start testing MOS with MEDIATOR would be to add the BVision card to
your configuration for the test purpose. After the computer start,
check if the MEDIATOR spaces (PCI memory and I/O) have been properly
detected by the system (compare the Show config report). If yes, you
can start checking how the MOS emulation works. If you have an RTL8029
PCI network card, check if it still works with MediatorNET.device.
(The pci.library should be switched to the NO_MMU mode and the
Envarc:Mediator/Emulation variable should be set to Yes.)

Please do not hesitate to contact us if you need further assistance.

Thank you for using Elbox's online support services.

Best regards,

Support Department of ELBOX COMPUTER
Web site: http://www.elbox.com
Online Store: http://buy.elbox.com

Any have MEDIATOR with a BVISION card for test it?
I don`t have BVISION, (only i have Voodoo 4500 PCI) and i can`t test it if work or not with this ELBOX comment about the MOS/UP + MEDIATOR.

Thanks

Quote:

Like I've said before, this has absolutely nothing to do with emulation .. MorphOS has CGX builtin, and loading P96 on top of that will result in an awful mess that will never work...


- CISC

*bump*

According to this report, the RTL8029 PCI network card installed on a Mediator is working without any problem in Morphos Powerup.