Forum Index
 » 
User Forums
 » 
Hardware
 » 
MorphOS for PowerUP
ModeEdit settings
  • Butterfly
    Butterfly
    munk
    Posts: 94 from 2006/3/27
    I need to alter the settings for resolution 1280x1024 at >8bit because the predefined ones don't work for my graphic card. I have a PicassoIV and this card is limited in 16/24 bit. When I try to lower the refresh rate modeedit decides to change the resolution :-/ On the 68k side with Picasso96 I had no problems creating a 1280x1024x16 resolution at 48Hz (yes, thats the lower limit of myTFT!) with its preference utility. I would like to use the same resolution setting with MorphOS too. I believe it should work but I have no idea how I can make it work.
  • »03.04.06 - 08:39
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    CLS2086
    Posts: 168 from 2005/8/25
    From: West of PARIS
    Hi,
    go to the "screenmode" menu and change the pixelclock for the "Mode" you want.
    Keep the Faith !
    VG 5000/A1000/500/500+/600/2000/1200PPC-GREX/1200PPC-ATEO/1200+1230-IVFPUSCSI/CD32/Pegasos 1 April1 G3/Pegasos 2 G4/ Ahtlon/K6-3/various funny machines too :-)
    Maybe one day a G4 AmigaONE when they will be debugged and without April...
  • »03.04.06 - 09:15
    Profile
  • Butterfly
    Butterfly
    munk
    Posts: 94 from 2006/3/27
    Quote:

    CLS2086 wrote:
    go to the "screenmode" menu and change the pixelclock for the "Mode" you want.

    You mean "ModeEdit", right? Thats what I did but as I wrote, this does also change the resolution to something unusable.
  • »03.04.06 - 09:48
    Profile
  • Butterfly
    Butterfly
    munk
    Posts: 94 from 2006/3/27
    I got it working. I created a monitor definition with the limits of my TFT. Then I could change resolution 1280x1024 to suit my TFT.
  • »04.04.06 - 07:34
    Profile