I'm getting a requester on a few programs when tying to run them on 2.4 on MorphMini namely getvideo, the new BluePaint. They say
"arexx reimplementation is not finished yet, if you want to use ARexx, please install your original rexxsyslib.library...

bluepaint also wants to mount a mos-office to proceed.

wetter says could not create MUI application error: object not found

Any help on these issues?

Quote:

With Snoopium you can check where MUI application creation fails by ticking on NewObject switch from the functions window.

"1. Rename rexxsyslib.library present in MOSSYS:Libs/ to, say, rexxsyslib.library_original.

2. Find the AmigaDOS 3.x version of rexxsyslib.library and copy the file to SYS:Libs/.

3. Use a text editor and insert the command line RexxMast >NIL: in your s:user-startup file.

4. Reboot"

[ Edited by kriz on 2009/10/19 16:16 ]

Quote:

Just curious... Can this be done without rebooting? Perhaps, a single "AVAIL FLUSH" console command can fully purge the incomplete library (or not...), before replacing it with the complete one. Then, RexxMast could be started from the same console.

[ Edited by jcmarcos on 2009/10/19 16:43 ]

Better use a FlushLib command. You can't flush a library when it is in use. So, you need to close all apps using this library, including Ambient. Not tested in this particular case though :). RexxMast >NIL: is already in startup-sequence.

[ Edited by Korni on 2009/10/19 17:28 ]

ok i threw a load of rx files in and along with snoopiums errors and got wetter going
bluepaint a bit different story, it needed a few custom mui classes , I loaded them but now it won't load up and still complains about rx files, it also wants a mount mos office but now it closes out before i can do anything

getvideo is working sweet again,

created a new problem, Ed doesn't load up on open with requester, no biggie though, I use nowin. Another is every now and them ambient will fail.

Quote:

What do you mean?

the error screen ( I think someone has been playing around dropping things where they shouldn't be,
as directed by the MorphOS team), Edit and mounter won't come up and snoopium lists application.mui error for edit

Not sure which error screen you mean, but the whole thing looks scary. I'd boot from cd and check my installation if i were you. :)

A few basic rules:

1. do not touch MOSSYS:
2. do not ever touch MOSSYS:
3. do not ever dare to touch MOSSYS:

:-)

4. except to rename/delete rexxsyslib.library


- CISC

Quote:

yep busted, now I have to do damage control!
It's not that bad though except for edit anad mounter, I need mounter to mount the mac formatted usb drive so I can read it.

@fab
explain how to check, match up the files? in lib, then place them in lib(outside of mossys) some of the libs are needed for other programs. Now what's this about deleting rexxsyslib.library?

[ Edited by xyphoid on 2009/10/20 9:46 ]

snooplog
mounter

Count Process Name Action Target Name Options Res.
----- ------------ ------ ----------- ------- ----
1 Ambient Thread 2 [ Open MyMorphOS:Tools/Mounter.inf Read OK
2 Ambient Thread 2 [ Open MyMorphOS:Tools/Mounter Read OK
3 Ambient Thread 2 [ Open NIL: Read OK
4 Ambient Thread 2 [ Open NIL: Write OK
5 file.stream 4 Open MyMorphOS:Tools/Mounter Read OK
6 Ambient Thread 3 [ ChangeDir SYS:
7 Ambient Thread 3 [ Open MyMorphOS:Tools/Mounter.inf Read OK
8 Ambient Thread 3 [ ChangeDir MyMorphOS:Tools
9 Ambient Thread 3 [ NewLoad Mounter OK
10 Ambient Thread 3 [ Open Mounter Read OK
11 Ambient Thread 3 [ ChangeDir Ram Disk:
12 Mounter ChangeDir MyMorphOS:Tools
13 Mounter Open CON:10/10/320/80/Mounter/AU Modify OK
14 Mounter Open NIL: Read OK
15 Mounter Open NIL: Write OK
16 Mounter Open * Modify OK
17 Mounter Open Mounter.info Read OK
18 Mounter Open Mounter.info Read OK
19 Mounter ChangeDir Ram Disk:ENV
20 Mounter Open DefIcon_Path Read OK
21 Mounter ChangeDir MyMorphOS:Tools
22 Mounter Open L:PFS Read Fail
23 Mounter Open L:EXT2FileSystem Read Fail
24 Mounter Open L:EXT2FileSystem Read Fail
25 Mounter Open L:NTFileSystem Read Fail
26 Mounter Open L:SGIXFileSystem Read Fail
27 Mounter Open L:HierarchicalFileSystem Read OK
28 Mounter Open L:MACFileSystem Read OK
29 Mounter Open MOSSYS:Libs/muimaster.libra Read OK
30 Mounter Open MOSSYS:Libs/muimaster.libra Read OK
31 Mounter Open MOSSYS:Libs/muimaster.libra Read OK
32 Mounter Open MOSSYS:Libs/muimaster.libra Read OK
33 Mounter ChangeDir Ram Disk:ENV
34 Mounter Open muidebug Read Fail
35 Mounter ChangeDir MyMorphOS:Tools


snooplog
edit

Count Process Name Action Target Name Options Res.
----- ------------ ------ ----------- ------- ----
1 [3] MOSSYS:Ambient LockScreen Workbench OK
2 [3] MOSSYS:Ambient ChangeDir Ram Disk:ENV
3 [3] MOSSYS:Ambient Open MagicWB Read Fail
4 [3] MOSSYS:Ambient ChangeDir Ram Disk:
5 Ambient Thread 2 [ ChangeDir SYS:
6 Ambient Thread 2 [ ChangeDir SYS:
7 Ambient Thread 2 [ ChangeDir Ram Disk:
8 Ambient Thread 2 [ Open CON:////Ambient Output Wind Write OK
9 Ambient Thread 2 [ Open NIL: Read OK
10 Ambient Thread 2 [ Open NIL: Write OK
11 Ambient Thread 2 [ Open * Read OK
12 Ambient Thread 2 [ ChangeDir MyMorphOS:MorphOS/C
13 Ambient Thread 2 [ ChangeDir MyMorphOS:MorphOS/C
14 Ambient Thread 2 [ ChangeDir MyMorphOS:MorphOS/C
15 Ambient Thread 2 [ ChangeDir MyMorphOS:C
16 Ambient Thread 2 [ ChangeDir MyMorphOS:MorphOS/C
17 [1] <Unknown> ChangeDir MyMorphOS:MorphOS/C
18 Ambient Thread 2 [ ChangeDir Ram Disk:
19 ramlib Load MOSSYS:LIBS/Textinputscroll Fail
20 ramlib Open MOSSYS:LIBS/Textinputscroll Read Fail
21 ramlib Open MOSSYS:LIBS/Textinputscroll Read Fail
22 ramlib Load MOSSYS:LIBS/Textinputscroll OK
23 ramlib Open MOSSYS:LIBS/Textinputscroll Read OK
24 ramlib Load MOSSYS:LIBS/Textinput.mcc.e Fail
25 ramlib Open MOSSYS:LIBS/Textinput.mcc.e Read Fail
26 ramlib Open MOSSYS:LIBS/Textinput.mcc.e Read Fail
27 ramlib Load MOSSYS:LIBS/Textinput.mcc OK
28 ramlib Open MOSSYS:LIBS/Textinput.mcc Read OK
29 [1] MyMorphOS:Morp Open MyMorphOS:S/user-startup Read OK
30 ramlib Load MOSSYS:LIBS/Aboutbox.mcc.el Fail
31 ramlib Open MOSSYS:LIBS/Aboutbox.mcc.el Read Fail
32 ramlib Open MOSSYS:LIBS/Aboutbox.mcc.el Read Fail
33 ramlib Load MOSSYS:LIBS/Aboutbox.mcc OK
34 ramlib Open MOSSYS:LIBS/Aboutbox.mcc Read OK
35 [1] MyMorphOS:Morp Open MOSSYS:Libs/muimaster.libra Read OK
36 [1] MyMorphOS:Morp Open MOSSYS:Libs/muimaster.libra Read OK
37 [1] MyMorphOS:Morp Open MOSSYS:Libs/muimaster.libra Read OK
38 [1] MyMorphOS:Morp Open MOSSYS:Libs/muimaster.libra Read OK
39 [1] MyMorphOS:Morp Open SYS:Utilities/Editor.info Read OK
40 [1] MyMorphOS:Morp Open SYS:Utilities/Editor.info Read OK
41 [1] MyMorphOS:Morp ChangeDir Ram Disk:ENV
42 [1] MyMorphOS:Morp Open DefIcon_Path Read OK
43 [1] MyMorphOS:Morp ChangeDir MyMorphOS:MorphOS/C
44 [1] MyMorphOS:Morp ChangeDir Ram Disk:ENV
45 [1] MyMorphOS:Morp Open muidebug Read Fail
46 [1] MyMorphOS:Morp ChangeDir MyMorphOS:MorphOS/C
47 ? Skin Manager ? ChangeDir MyMorphOS:MorphOS/Prefs/Ski
48 ? Skin Manager ? Open 22/MenuTitlebar Read OK
49 ? Skin Manager ? ChangeDir SYS:
50 ramlib Load MOSSYS:DEVS/clipboard.devic Fail
51 ramlib Open MOSSYS:DEVS/clipboard.devic Read Fail
52 ramlib Open MOSSYS:DEVS/clipboard.devic Read Fail
53 ramlib Load MOSSYS:DEVS/clipboard.devic OK
54 ramlib Open MOSSYS:DEVS/clipboard.devic Read OK


[ Edited by xyphoid on 2009/10/20 19:54 ]

i never touch mossys: but i always change mossys:c to get colors in shell :)

http://brain.umcs.lublin.pl/~rzookol/pics/shell.png

[ Edited by zukow on 2009/10/21 9:33 ]

zukow: and how do you that?

yea what he said! That's that old retro cga look

simple ansi codes:
and alias for ls

http://brain.umcs.lublin.pl/~rzookol/download/shell-startup

it wants to mount a volume gg when opening shell

remove this line:

path gg:bin/ add

weird I did but didn't get that screen, but the shell shows this new shell process 2 1;36mRam Disk:> 0m

on another note Is there a good gui mounter which will bring up devices, besides the one I messed up some how? I can't figure out which lib or mui interferred with it

IMO, if you have messed with MorphOS' system files and you don't understand/remember what you did then you should better reinstall the OS.

yea ...but then my get vid, mame and a couple of other programs won't work without dropping those lib or mui's in, I did swap out the mossys back to the original, but then my contexts in owb for get vid wouldn't work, the rexxsyslib thing, and wetter, won't work without the the files, I, dunno?
maybe this weekend i will again, but it's just those two problems I have edit, and mounter, edit I can do without, but mounter, is a necessity.
btw, did anyoun get bluepaint going? That was another program which wanted me to add some libs.

In looking at the snoop log, I noticed the exact errors when the mounter was mounted using the boot cd. So this may be a libs/mui ver. issue?
Everything else works fine.

Please give a clear reply to n impliment arexx on 3.0

Add MUI-Classes to SYS:Classes/MUI/ and
Libraries to SYS:Libs/

Delete MOSSYS:Libs/rexxsyslib.library and
copy the AmigaOS-3.1 rexxsyslib.library to SYS:Libs

[ Edited by Tom01 27.10.2012 - 16:02 ]

If you simply delete mossys:libs/rexxsyslib.library, it will be installed again during the next MorphOS update. And you will have to delete it again. Bis repetita ad nauseam.

The better-and-official way to handle this... is to rename mossys:libs/rexxsyslib.library to mossys:libs/rexxsyslib.library_disabled.
And copy a 68k libs to sys:libs/rexxsyslib.library as usual.
The MorphOS updater will then detect this "_disabled" file and skip copying the PPC rexxsyslib.library.
So you will never have to delete/rename again this mossys file and copy an old 68k one.