Hi all,
This is my first post, so I hope I?m not making a total fool of myself!

Also, I hope I've posted in the right place!

I just got myself an excellent Pegasos 2;
G4 1GHz processor
80GB Hard Disk
CD-RW
Radeon 8500 Graphics Card
512MB RAM
MorphOS 1.4.5
OpenFirmware 1.2

My problem is this after installing the basics (MOSNet, IBrowse, AmiNetRadio, fxPaint etc...).

The system stops booting at the MorphOS logo, it was working fine for hours before doing this.

If I leave the CD-RW door open and reboot, after the door automatically closes then it boots fine, or if I leave a CD in, it boots fine.

I have tried several clean install and these are fine, it does seem to relate to whatever I have installed, but thought I would pick some brains here to see if anybody else has ever had this, and if there is a way around it.

I have checked the user-startup and the other scripts, but all seems fine.

Any ideas?

Thanks in advance :)


[ Edited by Zero on 2007/6/16 19:28 ]

Add "Wait 1" before IPrefs in MOSSYS:S/startup-sequence

Quote:

YES!!!
That done the trick, thanks!
:)