• Caterpillar
    Caterpillar
    Posts: 37 from 2023/3/27
    Here's the full boot log I receive from the serial terminal.

    Code:
    U-Boot 2015.b (Dec 23 2022 - 13:11:28)

    CPU: AMCC PowerPC 460EX Rev. B at 1140 MHz (PLB=228 OPB=114 EBC=114)
    No Security/Kasumi support
    Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
    Internal PCI arbiter enabled
    32 kB I-Cache 32 kB D-Cache
    Board: Sam460, PCIe 4x + PCIe 1x
    I2C: ready
    DRAM: 2 GiB (ECC not enabled, 456 MHz, CL4)
    PCI: Bus Dev VenId DevId Class Int
    01 08 1033 0035 0c03 00
    01 08 1033 0035 0c03 00
    01 08 1033 00e0 0c03 00
    01 09 1095 3112 0180 00
    00 04 104c ac23 0604 ff
    PCIE0: successfully set as root-complex
    04 00 1412 1724 0401 ff
    03 00 1b21 1080 0604 00
    PCIE1: successfully set as root-complex
    06 00 1002 7280 0300 ff
    Net: ppc_4xx_eth0
    FPGA: Revision 03 (2010-10-07)
    SM502: not found
    PERMD2:not found
    VGA: 1
    VESA: OK
    Model: Sam460cr/le, PCIe 4x + PCIe 1x
    USB: EHCI 1.00
    scanning bus for devices... 4 USB Device(s) found
    scanning usb for storage devices... 1 Storage Device(s) found
    SATA Device 0: not available SATA Device 1: not available
    Press SPACE for menu, ESC or Q for prompt, Enter for boot source
    Countdown.. 0
    MorphOS boot loader version 1.10
    Booting from HDIMG0
    Trying to load "bootsam_ppc4x0.img" from "HDIMG0:"...
    Loaded "bootsam_ppc4x0.img" from "HDIMG0:", booting...
  • »24.06.23 - 10:41
    Profile