• Paladin of the Pegasos
    Paladin of the Pegasos
    Amigaharry2
    Posts: 1210 from 2010/1/6
    From: EU-Austria (Wien)
    Quote:

    frickler schrieb:
    no, does not show up.


    Very strange, because that card is working well here. Really a PC Card WG511T 108 Mbps Wireless ?
    It should appear in NetPrefs as Wl1 (atheros5000.device:0). 1st LED should beginn to flash after FirmWareboot is complete and MOS-Kernel starts. When booting MOS is complete, both LEDs should light/flash.

    Edit: Found out that status-LED must flash one(?) time when turning power-on (means recognized card by firmware). If not, MOS won't recognize it.
    The card has to be connected before turning power-on. Normaly it should be hot-pluggable, but seems not to work in all cases

    [ Editiert durch Amigaharry2 29.10.2019 - 09:06 ]
    Peg2, 3xPowerMac G5, 2xPowerbookG4, 2x MacMiniG4, Efika (again), A3000T and life is never boring.....
  • »29.10.19 - 07:28
    Profile