Quote:

It's not that much, unless it's changed with recent updates. It says 104GB on this nice page: http://thomas-rapp.homepage.t-online.de/filesyslimits.html

I'll go with IceFS. I just ordered a usb drive to backup too from newegg.com.

I plugged in my external 21.5" monitor and the screen is cut off.
Is there a way to control the external video output?

External monitors aren't supported yet.

jPV,
Quote:

Damn Wikipedia, and its devilish combination of convenience and inacurracy.

Bummer about the external monitor.

Got my scanner to work again in scandal.

Can't get my color laserjet to accept pages.
I am using netprinter.device. Printer has an IP.
I assume no driver is needed to print to a network printer as they just accept RAW data.

I use to print from Pagestream to PRT: and it would work.
Now it won't.
I copied the NETPAR dosdriver over and rebooted.
Setup NETPAR: in pagestream and It says it is printing but nothing comes out.



Router shows printer is getting IP of 192.168.1.98.
netprinter prefs setup for that IP.


[ Edited by bash64 08.01.2013 - 05:07 ]

Printer pings from Morph


5.Ram Disk:> ping 192.168.1.98
PING 192.168.1.98 (192.168.1.98): 56 data bytes
64 bytes from 192.168.1.98: icmp_seq=0 ttl=255 time=0.253 ms
64 bytes from 192.168.1.98: icmp_seq=1 ttl=255 time=0.228 ms
64 bytes from 192.168.1.98: icmp_seq=2 ttl=255 time=0.234 ms
64 bytes from 192.168.1.98: icmp_seq=3 ttl=255 time=0.231 ms

Hmmmmmmmmmmmmmmmmmm.............
The netprinter.device under Printer keeps getting deleted.
It saves, shows up a few times, then disappears.

You need to press "return" after typing the device name into the text field to save it. It is some quite old glitch!

When you not press enter it will be in place only until you close the window.

Geit


[ Edited by geit 08.01.2013 - 12:03 ]

Quote:

I know 2 sites crashing (leo.org that was reported several times), but apart from that i use this webkit revision without trouble, except for the major memory leak in facebook.

Anyway, a newer webkit revision will most likely fix this. These are not specific issues to MorphOS.

Fab,
Quote:

The etherpad software crashes with OWB 1.18 (at least on my machines). Look e.g. here: http://beta.etherpad.org/p/morphos
With 1.17 Etherpads worked reiably.

1.17 is crashing a whole lot less so I will stay with it.

Workong on a printer issue for now.
Still no luck with netprinter.device.
Going to print from windows to see if it works at all.

Quote:

You'll still need to define printer driver, IMHO. I have HP Laserjet configuration in Printer prefs and then on the same page device configured as "netprinter.device" unit 0. And then in NetPrinter prefs correct settings for it. Then printing to PRT: should work.

Fab: the memory issues are definitely noticable, unlike previous releases.
I notice that memory is now released when a tab is closed (whereas in 1.17 it was only when the broswer was closed iirc). Is that a webkit change, or an Odyssey one?

On the downside I can now use 1GB of memory just by scrolling up and down the comments in the Guardian: example
Page loads, approx 30% memory used (of 1GB)
Scroll down to start of comments, still only 30%.
Scroll through the comments to the end: 40%
Scroll up and down again a few times, without loading any new comments or changing the page: 100%

Is that a webkit issue, or possibly a Cairo one?*

EDIT: * Seems it is a javascript (and therefore webkit) issue after all.

[ Edited by boot_wb 09.01.2013 - 09:58 ]

@Fab:

you can add iana.org to the list (I was looking for an unclaimed port number to use).

I own a HP Laserjet CP1025nw.
You know, the last time I printed I may have been using an old LaserJet 5M.
I gave that one away.

Perhaps it is the printer selected.
I do not know a match for the CP1025nw.
Supposedly it is running PJL.
Does not have postscript.

Any recommendations for doing a proper test print?
I am using ed to make a text file called test.
COPY test TO PRT:
COPY test TO NETPAR:
TYPE test TO PRT:

etc..............

Does ghostscript come with Morph OS?
This assign is not in my OS:

Ghostscript:GS -sDEVICE=turboprint -q

That is the print command in the tab for postscript.

I used to run this http://aminet.net/package/text/dtp/GS510-4-Amiga.
68k version 5.10


[ Edited by bash64 08.01.2013 - 14:52 ]

> Does ghostscript come with Morph OS?

No.

> I used to run this http://aminet.net/package/text/dtp/GS510-4-Amiga.
> 68k version 5.10

http://www.geit.de/stupid/ghostscriptinstaller.lha

This installs Ghostscript 8.70 (m68k version).

bash64,
Quote:

VPDF has ability to print pdf directly using TurboPrint:
1. configure printer in printer prefs, select laserjet 5l (and select PCL5e emulation in printer), netprinter.device when using netpriter
2. if you have turborpint 7.60, select higher laserjet model (1300)
3. open vpdf and some pdf file
4. print file (turn off postscript switch)

I'm working on new printing system, so maybe we will have better PCL drivers (and better PS printers configuration tool)

@Zukow

Seems this printer doesn't support PCL, it uses zjstream.
Any plans to port foozjs with your new printing system?

Yes, in theory. I plan to write a few independent bricks first
1) Postscript printer driver parser
2) Postscript preprocessor
3) Reggae decoder/encoder for CUPS raster image format

zjstream problably uses CUPS raster format also so after finishing encoder foozjs can be adapted to morphos

You are right about foozjs. I was hoping it didn't need special treatment.
It works in linux with hplip.

I have morph os 3.1 so whatever TP came with it is what I have.

Let me know if you get it written.

This is one of the best printers HP ever made.

Its an interesting story:
They wanted a printer to make them a lot of money that cost them little to make so they made the worlds tiniest color laser printer with network abilites. The trick was that it would tell you your toner was empty after so many pages.
The problem was people were removing their yellow toner and finding it still had 90% toner left in it even though the printer said it was empty ( you exceeded the "print limit"). Well, that created quite a stink so they modified the monitoring utility in windows to allow you to do 2 things:
1) Stop bothering you about the toner being out and just keep printing. I have been told that black is out for a very long time now and it is still going strong.
2) Allow you to install 3rd party toners. An HP toner costs $60. You can get a 3rd part toner for as little as $10 on ebay or you can buy refill toner and refill them for about $7.

And thats how this little printer became the most cost effective (I paid $130 new on sale) , tiniest, color laser ever made by HP.

I just realized, morph came with TP but the TP is no good.
You must give me TP! TP for my bunghole!
Worship me with your TP.

@FAB

Everytime I lock up using OWB it is while using the scroll wheel to scroll the screen.

Also, if I only keep one tab open and keep moving between pages, eventually I have no ram free anymore.

No memory is freed up for moving from a large web site to a web site with a few pieces of text.



[ Edited by bash64 08.01.2013 - 19:18 ]

@boot_wb

I tried your example at guardian, and the memory usage seems stable once it's loaded and scrolled to bottom. I can scroll forever and ram doesn't decrease.