New MorphOS User...
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    pan1k
    Posts: 147 from 2009/1/20
    Just wanna say Hi! I have an Efika on the way. You guys might see me around as I configure my system. I'm just testing the Efika out, seeing if it's right for me. I've got a lot of experience with Amigas and a little bit of experience with MorphOS. See you guys around...

    Thanks Amigadave for getting me started!
    MacMini 1.5Ghz / Amiga 4000T Cyberstorm 060, 132MB RAM, Cybervision 64/3D, XSurf-III, MP3@64, Buddha Flash / Amiga 1200 GVP 030, Subway USB, 32MB RAM
  • »27.01.09 - 16:51
    Profile
  • Butterfly
    Butterfly
    Posts: 80 from 2009/1/19
    Hello there, I just did what you are about to do!

    Things to look out for:
    1) get Radeon 1/2 height AGP video card.

    2) use FAT16 formatted USB drive that contains the efika install file. I had troubles with this initially but eventually conquered thanks to a lot of help from people here.

    I will be looking out for your future posts and will lend a hand should you need it.

    Good luck
  • »27.01.09 - 17:08
    Profile
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    pan1k
    Posts: 147 from 2009/1/20
    All I know it's it's a Radeon 9200....Thanks for the tip on Fat16! I'm sure it will come in handy.. hehe
    MacMini 1.5Ghz / Amiga 4000T Cyberstorm 060, 132MB RAM, Cybervision 64/3D, XSurf-III, MP3@64, Buddha Flash / Amiga 1200 GVP 030, Subway USB, 32MB RAM
  • »27.01.09 - 17:49
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    Welcome to the wonderfull land of MorphOS!!!
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »27.01.09 - 18:23
    Profile