Hola a todos, me ha llegado el pegasos 2, al principio me arrancaba,pero escribi algo del firmare y de la pila,
6
7 stack.
Y y ahora cuando lo enciendo no funciona.

he leido que tengo que hacer estos pasos:

http://www.bplan-gmbh.de/update_e.html

If your system is already in a none bootable state, please connect the serial line using the following parameters: 8N1, 115200, Flow control off, Transmit delay 100ms (example settings using TeraTerm)
TeraTerm1.jpg
and input the following command sequence using copy/paste:

a0;L;
w38806040;+;w64848000;+;w3ca0f100;+;w60a50c78;+; w7c000278;+;w7c802d2c;+;w7c0006ac;+;w3ca0f100;+; w38600014;+;w98650c7c;+;w7c0006ac;+;w3c80fff1;+; w386000aa;+;w98645555;+;w7c0006ac;+;w38a00055;+; w98a42aaa;+;w7c0006ac;+;w38c00080;+;w98c45555;+; w7c0006ac;+;w98645555;+;w7c0006ac;+;w98a42aaa;+; w7c0006ac;+;w38e00030;+;w98e40000;+;w42800000;
a0;g;

ATTENTION: If your terminal program does not allow the setting of a transmit delay, you have to enter the command sequence by hand (to avoid a receive buffer overflow). In this case please input the commands in one row (a0;L;w38806040... and don't use space,CR,LF). After the last command and aprox. 8 seconds of waiting time please reset your system. As the last step you now have to install the update as descriped above.

Tengo el programa para pc, y un pc para conectarlo al pegasos, pero no se que cable comprar y q pasos mas seguir,
necesito ayuda!!!