Forum Index
 » 
Developer Forums
 » 
Development
AirScan/eSCL on MorphOS
Page 2 of 2«1
2
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    Quote:

    Primax wrote:
    Just tested it with my Canon G6050: works great! Thanks!! :)


    Great! I'm adding it to the list of supported devices.
  • »18.04.26 - 16:49
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    tolkien
    Posts: 562 from 2013/5/29
    I can prescan with my Hp envy 5640 but when It finish It freeze de program. The scan is done ok.
    But when trying to scan (real scan) It gang at connecting to scanner.

    This looks promising anyway!
    MorphOS: PowerMac G5 - PowerBook G4 - MacMini.
    Classic: Amiga 1200/060 - A500 PiStorm
  • »18.04.26 - 17:45
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    @tolkien


    Please click Scanner Capabilities and paste here what the program displays.

    [ Edited by tomasz 19.04.2026 - 03:32 ]
  • »19.04.26 - 03:32
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    Quote:

    cyfm wrote:
    Hi,

    Nice progress in the UI! The program now detects my HP Color LJ Pro MFP 3302 properly but it indeed still fails when I try to scan

    "Failure when receiving data from the peer! (56)
    File: AirScanner4.hws [current line: 589 - In function: perform}

    though (and completely quits the program then)

    On a positive note, it indeed starts to get data with PreScan and it gets displayed in the preview area, albeit not from the single sheet feeder.

    Definitely progress, great !




    The feeder isn't programmed yet. I'm trying to gradually introduce options that I can't test myself. Unfortunately, my scanner doesn't have a feeder. Please use Scanner Capabilities and paste the displayed result here.
  • »19.04.26 - 03:46
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    tolkien
    Posts: 562 from 2013/5/29
    Quote:

    tomasz escribió:
    @tolkien


    Please click Scanner Capabilities and paste here what the program displays.

    [ Edited by tomasz 19.04.2026 - 03:32 ]


    I get this in airscanner debug log:

    Ready. Scan and draw crop rectangle!
    Pobieram /eSCL/ScannerCapabilities ...
    Błąd: brak odpowiedzi z /ScannerCapabilities!
    MorphOS: PowerMac G5 - PowerBook G4 - MacMini.
    Classic: Amiga 1200/060 - A500 PiStorm
  • »19.04.26 - 10:14
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    I see I need to translate some error messages.
    that meant:
    I'm downloading /eSCL/ScannerCapabilities ...
    Error: No response from /ScannerCapabilities!


    [ Edited by tomasz 19.04.2026 - 15:45 ]
  • »19.04.26 - 15:42
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    I've uploaded a new version of the program. Currently, during the first successful connection to the scanner, the program downloads a list of supported resolutions, sends them to the selection window, and saves them in a preferences file along with the IP address and the detected scanner name. Upon restart, the program loads this data into the interface. You won't see resolutions your scanner doesn't support anymore.

    Unfortunately, access to the scanner's properties, which are normally shared with the scanner's address in /eSCL/ScannerCapabilities, is key to this program's logic. The non-standard location of this information prevents the program from working properly in this version. However, I will continue to investigate a solution.
  • »19.04.26 - 16:31
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    Quote:

    tolkien wrote:
    I get this in airscanner debug log:

    Ready. Scan and draw crop rectangle!
    Pobieram /eSCL/ScannerCapabilities ...
    Błąd: brak odpowiedzi z /ScannerCapabilities!


    Try to choose HTTP instead of HTTPS before clicking Scanner capabilities.



    [ Edited by tomasz 19.04.2026 - 17:44 ]
  • »19.04.26 - 17:42
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    tolkien
    Posts: 562 from 2013/5/29
    With http I get Error: no response from /ScannerCapabilities!
    MorphOS: PowerMac G5 - PowerBook G4 - MacMini.
    Classic: Amiga 1200/060 - A500 PiStorm
  • »20.04.26 - 13:16
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    matt3
    Posts: 774 from 2004/2/10
    I tried my Canon MF750.

    Only HTTP saw the scanner, not HTTPS.

    When I hit scan you see the scanner get ready to scan but just stop before it does it.

    Here is the message in the box:
    Scan start failed: HTTP 500
  • »20.04.26 - 17:59
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    Do yu see anything after clicking HTTP and Scanner Capabilities?
  • »20.04.26 - 18:03
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    matt3
    Posts: 774 from 2004/2/10
    Quote:

    tomasz wrote:
    Do yu see anything after clicking HTTP and Scanner Capabilities?


    Yes, lots and lots of text. I will PM it to you...
  • »20.04.26 - 18:27
    Profile
  • Cocoon
    Cocoon
    tomasz
    Posts: 49 from 2026/2/11
    From: Poland
    Quote:

    tolkien wrote:
    With http I get Error: no response from /ScannerCapabilities!


    Did I understand you correctly that despite these errors, in prescan mode it saves escl_prescan.jpg to RAM:T?
    I'm embarrassed to ask, but in the printer settings (via the website) do you have Network scanning = Enable?
  • »20.04.26 - 18:41
    Profile
Page 2 of 2«1
2